shdwrider3

GingeyBook

Jerry but this time he&#39;s wearing a traffic cone

Jerry but he's wearing a traffic cone

Jeep Ducks

Faran3D

HEY WASTLELANDER, FREEZE!!!… your enemies with this laser pistol and rifle upgrade! Simply replace your standard fusion cell with this cryo cell and your weapon will inflict freezing damage to your enemies, what a find!&nbsp;This design is an upgrade to the laser pistol design which I released a few days ago - a full redesign of the cell and sized to fit the pistol and the rifle I am planning on releasing soon. Please have a look at my other uploads to find the Fallout AER9 Laser Pistol!&nbsp;This new version adds embroidered/flush lettering to the AMS print, everything including the new writing engraved on the single color print, and it is now hollowed and threaded to provide a storage area inside the cell.&nbsp;This can be scaled as large as you want, but do not scale down as the lettering is already as small as printing with 0.4mm nozzle will allow.&nbsp;I hope you love this design, and please show it by dropping us a like and sharing your results here and on social media!&nbsp;Pro Tip - When printing with an AMS it's much more economical to print a few instead of just one. I recommend 6 at a time, but at least 3.&nbsp;If you'd like to buy me a coffee to support this and future projects, I'd really appreciate it!  https://www.buymeacoffee.com/faran3d&nbsp;

Fallout Cryo Cell - AMS and Single Color Profiles - Fully Detailed with Storage!

Fallout

Robofish

This delorian can be printed in one or two colors with not much fillament at all. The color change happens all at one layer at 2mm so no ams is needed. Be carefull not to cut tabs, just the sprues.For assemly, simply cut away sprues and slide the pieces together. Depending on the tolerances of the printer, trimming with a flushcutter or superglue may be helpfull.This model has been optimized to print in only 1-2 hours.&nbsp;&nbsp;

Delorian Back to the Future kit card

Kit Cards

maegu_

Wall Art - Tree

wall art

Additive Atom

<a target="_blank" href="https://shop.thehueforge.com/collections/hueforge?aff=3" rel="nofollow noopener">HueForge</a> Fire Dragon created for the <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>. Only manual filament swaps required.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments used <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Red Transmission Distance: 1.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Orange Transmission Distance: 7.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA White Transmission Distance: 5</a></li></ul>Swap Instructions:<ul><li>Start with <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">PolyTerra Charcoal Black</a></li><li>At layer #9 (0.8mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">PolyLite Red</a></li><li>At layer #12 (1.04mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">PolyLite Orange</a></li><li>At layer #21 (1.76mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">PolyLite Lemon Yellow</a></li><li>At layer #31 (2.56mm) swap <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">PolyLite White</a> for the rest.</li></ul>

Fire Dragon - HueForge Filament Painting

Paintings

Duane777

Assemble with CA glue,Assemble parts without the lid, and check for proper fit. While holding the sides together, fit the lid by relaxing the sides to engage the hinge pin. Check that the lid moves freely, you can now add a few drops of CA glue seams. The parts fit 3mm into the sides so it's not difficult to get the parts aligned. The PLA profile is a ‘snuggish’ fit, and the ABS is quite loose.&nbsp;Please post makes, and use 2 colors. I printed about 6 of these in PLA and ABS and I was just too tired printing the same thing yet again :)Note: The box width is for q-tips around 76mm the internal width is 80mm. You can change the width to suit yours by scaling all the upright parts in the Z direction. They are all 86mm tall and fit 3mm into the sides so you're left with 80mm.

Q-Tip / Cotton Bud Box

utility

tomtom5893

<h2>Your new companion for relaxation and diving into creative breaks - The SpiralSpin Fidget Tower!</h2>&nbsp;Here you have the SpiralSpin Fidget Tower, a fidget toy that promotes relaxation and helps combat boredom. Available in three different sizes (5.7, 7.8, and 9.9 cm), the SpiralSpin Fidget Tower is just the right choice when you need a short break. With its spiral structure and a movable core that you can effortlessly move up and down, it invites you to immerse yourself in a world of relaxation and take on the battle against boredom.The great thing is that you can print it without additional support material, although I would recommend using tree supports (at least at the top part) to achieve the best results. It works perfectly right after printing and does not require any post-processing. This fascinating fidget toy is ready to bring you joy and give your creative breaks an extra boost. Have fun, and enjoy the relaxing moments, and leave boredom behind! I made the overhang and angle of Version 1.1 the spiral smaller. So now it should be easier to print.(please download the new file if you still have the old one)<h3>keep in mind:</h3><ul><li>The lower the layer height, the smoother the model and the easier the twist</li><li>If you print the core with 100% infill, it is heavier and will go up and down more easily</li><li>If you have problems with the tolerances, and it does not move, scale the Z axis a little higher. then the angle when printing is not so steep, and it should print even smoother</li></ul>&nbsp;Happy Printing and Fidgeting!

SprialSpin Fidget Tower V1.1 - Print in place

Toys

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

Star Wars

JamesThePrinter

A rope spirals around to create a small bowl.All of my rope models can be found in collections on <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">MakerWorld</a> and <a target="_blank" href="https://www.printables.com/@JamesThePrinter/collections/326850" rel="nofollow noopener">Printables</a>.&nbsp;Print SettingsNo special settings needed&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Polymaker PolyTerra Sapphire Blue</li><li>Polymaker PolyTerra Army Red</li><li>Polymaker PolyTerra Forest Green</li><li>Polymaker PolyTerra Pastel Banana</li></ul>

Rope Bowl

Sellable

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Figures

vojta.suchomel

It's necessary to use transparent filament This is a print profile for a solid block of the material, achieving higher mechanical strength and transparency for transparent materials, The critical factor is 107% flow of the material, Slower speed, and a bit higher print temperature. You can use it on your own model, For example, optical lenses, Solid blocks with hollow inside, etc. You can slightly tune it by yourself, for example slower print speed 10-15mm/s, or use higher extruder temp. 260°C. For post-process, you can sand it with sandpaper, and for a totally clear look use a hot airgun, lighter, or torch.

PETG Transparent print by FDM

Profiles

brody.bolanos

Bambu Lab P1P Printable Cable Drag ChainI created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. <ul><li>Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.</li><li>When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.</li><li>Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. </li><li>Below you can see the difference in sagging with the chains fully extended.</li></ul>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. &nbsp;This is a 3d printed chain with a lot of moving parts, overtime tolerances will loosen and it will start to wear down. I haven't had any issues so far but the Amazon chain is still a better option overall when it comes to durability and smoothness. <figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_j3urpsw5m7fl.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_0djvy4hh02bh.jpg"></figure><blockquote><h3>Files</h3></blockquote>Main Files<ol><li>Chain Link Latch</li><li>Chain Link Latch PTFE Clip</li><li>Chain Link 0.0</li></ol>Alternative Files<ol><li>Chain Link -0.02</li><li>Chain Link +0.02</li></ol>Print Files<ol><li>Printable Cable Drag Chain Assembly</li><li>Printable Cable Drag Chain Test Print</li></ol><blockquote><h3>Parts/BOM</h3></blockquote><ul><li>22 Chain Link Latch</li><li>22 Chain Link 0.0</li><li>1-3 Chain Link Latch PTFE Clip ( I used one on the 11th link)</li></ul><blockquote><h3>Print Orientation</h3></blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_dwzfge3tu4g9.png"></figure><ul><li>The PLA/+ printing preset for cooling uses the Aux fan, I don't know how much it effects the print as the fan blows from one side but I kept all the male sides of the links facing towards the fan. </li></ul><blockquote><h3>Print Setting</h3></blockquote>Filament Tested - eSun PLA+, Bambu Tough, Polylite PLA Pro (dried and kept around 20%RH). DO NOT USE PLA, IT WILL BREAK<ul><li>See print file</li></ul>Supports<ul><li>None</li></ul><blockquote><h3>Before You Print</h3></blockquote>In the Files section you might have seen two alternatives Chain Link Files.<ol><li>Chain Link Final -0.02</li><li>Chain Link Final +0.02</li></ol>These alternative files change the hole sizing slightly in the cable links. 0.0 worked perfectly when using PLA + but when I switched over to PETG I had to tighten the tolerances, making the hole smaller, hence the +0.02 file. Alternatively, -0.02 will expand the hole . More under “Assembly” below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_2n9xykfuj8sc.png"></figure><blockquote><h3>PETG Note</h3></blockquote><ul><li>It seems like a hit or miss with PETG, as a small percentage of users couldn't get good prints ( including me). If you are having issues with the tolerances being too lose please comment or message me and I will send you + 0.03/0.04 files. </li></ul><blockquote><h3>Assembly</h3></blockquote><ul><li>Print Printable Cable Drag Chain Test Print</li><li>Once you've printed the test file, press the matching links into place, in total 3 small chains consisting of (0,0,0) (+.02,+.02,+.02) (-.02,-.02,-.02) . It's kind of hard but a little easier if you slide the links together along the chamfer on each cylinder. </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_g6fawy05urym.png"></figure><ul><li>Next snap the latches into place</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_11ru8ghqjsnh.png"></figure><ul><li>What you're looking for initially is a snug fit, after rotating the pieces back and forth a handful of times they'll loosen up and you should be able to figure out which sizing is correct. There should be very little movement (almost none) when wiggling the links in any other direction other then rotating. If you have PLA + I would suggest doing the test print in that ( pla should work fine for this but the pieces will definitely break ) reasoning being I know PLA + gives a good fit and even you you want to print in something else, it'll help you get a good idea of how it should feel. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_a9kvyeohlog5.jpg"></figure><ul><li>Once you've figured this out, use the file Printable Cable Drag Chain Assembly ( which is sized at 0.0) to print out 22 links, 22 latches, and 1 PTFE latch ( or more ). Or use another sizing!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_qxbgr6led8o5.png"></figure><h3> </h3><h3>Make sure to recalibrate after the chain is installed. </h3>&nbsp;<blockquote><h3>Tips</h3></blockquote><ul><li>I only used 21 latches including the PTFE latch, I forwent the first latch on the link (the side closest to the frame) </li><li>To remove the latches, insert a small flat head screwdriver and twist. </li></ul><h4>Be careful where you place the PTFE clips, one in the middle is enough. Additional locations can cause the PTFE tube to put unwanted force on the chain.</h4>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_jdfxwg6vkfon.jpg"></figure><h3>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. </h3>&nbsp;If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to <a target="_blank" href="https://www.buymeacoffee.com/brodyB" rel="nofollow noopener">Buy Me a Coffee</a> or <a target="_blank" href="https://paypal.me/brodyb10?country.x=US&locale.x=en_US" rel="nofollow noopener">PayPal</a> would be greatly appreciated!&nbsp;<h3>As always, given different printing environments, filaments, etc., prints may not work perfectly for everyone. If you are having issues please message or comment and I will try my best to resolve the issue.</h3>