shaunparker90

RiHi36

finger splint in different sizes&nbsp;can be used with or without tape - depends on the printed size or scale

finger splint in different sizes

finger guard

impietro

This is a car fender clip. Designed and printed by me. When you disassemble the fenders to make repairs or modifications, it happens that they break. No problem, now just print with a suitable material and they can be easily replaced

Fender car clip

NUKDDD

Cut the cord with the <a target="_blank" href="https://makerworld.com/en/models/233562#profileId-250197" rel="nofollow noopener">alternate base that uses a battery powered puck light designed by Tawpie</a>.&nbsp;Meet Felix, the Flexi Shroom 🍄 a mushroom lamp for Bambu Lamp Kit 001 and tea lights up to 39mm diameter. Easy to print, no supports, and A1 mini compatible. &nbsp;You can support me by purchasing <a target="_blank" href="https://amzn.to/3PApWSp" rel="nofollow noopener">The lights </a>I used from this link. I may earn a small commission.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊&nbsp;The mushroom cap is flexible, so when it sits on the stump, it'll sag a little and give it a more natural look, and you can fidget with it as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748230/2024-01-29_f8209c9a8e82a.jpg"></figure>The base comes in 2 flavors, 1 is for the lamp kit, it screws on to the stump, and don't forget to use the diffuser discs to make it less blinding. Like my other mushroom lamps, the top is interchangeable with <a target="_blank" href="https://makerworld.com/en/models/95343#profileId-101704" rel="nofollow noopener">Stumpy</a> and <a target="_blank" href="https://makerworld.com/en/models/127134#profileId-137541" rel="nofollow noopener">Shady</a>, you can even screw on <a target="_blank" href="https://makerworld.com/en/models/86208#profileId-92095" rel="nofollow noopener">Teeny</a>, <a target="_blank" href="https://makerworld.com/en/models/160662#profileId-176353" rel="nofollow noopener">Cactus</a> and <a target="_blank" href="https://makerworld.com/en/models/124690#profileId-134681" rel="nofollow noopener">Lucky</a> if you want, but it works best with my mushroom caps.&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Flexi Mushroom Lamp 

brydie

phone 

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Easter Bunny Egg Lamp 

easter

Fl0tterfeger

Modularer Befestigungsadapter für WAGO 221 Klemmen mit Zugentlastung – einfache Montage, zuverlässige Lösung.Getestet in PETG und PLA in 0,2mm Schicht und 0,4mm Düse. Kein Support nötig.&nbsp;Modular mounting adapter for WAGO 221 terminals with strain relief – easy installation, reliable solution. Tested in PETG and PLA with 0.2mm layer and 0.4mm nozzle. No support required.

Modular Mounting Wago 221

work

Vixvvo 3D

commercial licenses will be accessible through my Patreon page, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated!&nbsp;This is a V3 version of the previous one I've made, the last one i made is exactly the same, but 1 drawer instead of 3! “I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!” <ul><li>Took this idea from <a target="_blank" href="https://www.printables.com/@godsci" rel="nofollow noopener">Godard Scientific</a>. (Not the same builf)</li><li>Around 500g of filament</li><li>10Hour of print time</li><li>needs <a target="_blank" href="https://www.amazon.ca/uxcell-Screws-Phillips-Carbon-Tapping/dp/B09B385SFS/ref=sr_1_8?dib=eyJ2IjoiMSJ9.3XW9GKS24tRc1l0zzCYIaDV_JpwTjt1yyVTipehZhP_09z7Kqgsl4oFVeEVEHPo4FCwFetbodOyEBIQIJwt2k9aJRGSwSKCYmFiBS4IpznPE5CCs6on0nJUxpOMH_GJSkh5q3agzswdsSxrtf3oyMsTVDX3dV9Tgz0x-hfpoO_IpjMS8Uoomz9uCN1muf3RiZqNcjGYMd8Hi4ZCI5sQz-IODglrSst2MInJAshQ88QCc99hJqN2X6ZCLBld0p8HNnfJp8Of8ATmcldB1l-79JkGAQFM-6mYJH74tGxEnRXg.OBCFM2l7fP2IISSKCx1KfzWYzsLorDqZ5ts2zwnfyks&dib_tag=se&hvadid=684854298656&hvdev=c&hvlocphy=9000121&hvnetw=g&hvqmt=e&hvrand=15885152324473862792&hvtargid=kwd-317894824318&hydadcr=11265_13489654&keywords=18mm%2Bscrews&qid=1708800713&sr=8-8&th=1" rel="nofollow noopener">M3 x 18mm</a> Screws</li></ul>

Under-Desk Drawer V3

electrical 

h3li0

vase for ikea's FEJKA artificial plant created in fusion 360&nbsp;photos show printed in brick red petg-cf<ul><li>0.16mm layer height</li><li>spiral vase</li></ul>&nbsp;If you enjoy using this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buying me a coffee</a>. Your contribution goes a long way in fueling future creations. Thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table

vase for ikea's FEJKA artificial plant

pots

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Baby Groot has again entered the gaming realm, protecting your headset ! Remember to check out my other headset stands. OBS Make sure to check your PURGE settings , and always make sure your filament is calibrated!!

Baby Groot Headset stand

groot

Every Day Counts

<img src="https://makerworld.bblmw.com/makerworld/draft/136147/2023-11-01_dd81c055970b.gif">This lid is designed to fit my trash bin which is designed to fit the A1 Mini bed. <a target="_blank" href="https://makerworld.com/en/models/51543#profileId-53267" rel="nofollow noopener">See here on MakerWorld.</a>&nbsp;This model is designed to fit onto the build plate of the Bambu A1 Mini. &nbsp;Easy to print in any material, but PLA will be sufficient.Photos show it in Bambu Labs PLA basic black filament.Size on the print plate is 179W x 179D x 180H (mm).&nbsp;Please also see my other bin models on <a target="_blank" href="https://makerworld.com/en/u/369067369" rel="nofollow noopener">my homepage</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/136147/2023-10-28_c78a63d83f5dc.png"></figure>

Swing lid for trash can - fits on A1 Mini

bins

Infinity 3D Prints

I WANTED A MINIMAL COVER WITH A SMALLER BUTTON TO KEEP UP WITH THE AESTHETICS OF THE A1/A1 MINI . I COULD NOT FIND WHAT I WAS WANTING SO THIS WAS BORN . The button is flush with the cover and it’s way smaller than any other on the makerworld . This looks fantastic and works even better . Ty for looking As always if you like my models like and follow !! *the cover will snap inPlace needs a little forcing but don’t be too rough!!*<img src="https://makerworld.bblmw.com/makerworld/draft/314204/2023-12-21_58fb4420c7a918.gif"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/314204/2023-12-21_109ae9258fb8d8.gif"></figure>

MINIMALIST A1 COVER WITH 19MM BUTTON

JAV-3D

Remove PTFE Tubes, one, two or all at once.

PTFE-Star remover Bambu Lab A1 (mini)

tools

Gremflin

A simple keychain that can easily be printed in two colors with the change filament option in a slicer.&nbsp;I printed it in PLA with 100% infill, but less infill should also be fine.

Cute Elephant Keychain 

baby

Hiko 3D

**These designs are for personal use only. If you want to get exclusive and free designs also become an official reseller visit my patreon and join!** Hello everyone, I share a Christmas-themed knitted container: Reindeer 🦌&nbsp;- It is a simple container where you can store store some candies or anything else you want to give this Christmas. 🎁🍬&nbsp;- Does not need support.&nbsp;Reindeer is printed in 4 colors with 1 AMS unit. 🎨&nbsp;I hope you like it and can create Reindeer in different colors with the other Christmas members. ☃️🎅🦌🐱🎄&nbsp;&nbsp;