shaolikelee

wuguigui

A cute banana hook with Magnetic and sticky Adhesive Pad 2 in 1, you can choose to use a magnet(Φ15mmx5mm) to mount it on a refrigerator or whiteboard, or use a 3M sticky adhesive pad(Φ30mm) to mount it on the ceramic tile of bathroom.There is another half-part that can stick together with the hook part to make it look like a real banana, but this is only for the magnet version.All parts can be printed with no supports, recommended to add a raft for some parts with small edges.Watch the video to get more information.&nbsp;Have fun!&nbsp;There is a vegetable and fruit magnets family on<a target="_blank" href="https://cults3d.com/en/3d-model/home/3d-printable-fruits-vegetables-magnet" rel="nofollow noopener">https://cults3d.com/en/3d-model/home/3d-printable-fruits-vegetables-magnet</a><a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/bathroom/3d-printable-fruits-and-vegetables-magnet" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/bathroom/3d-printable-fruits-and-vegetables-magnet</a><a target="_blank" href="https://www.myminifactory.com/object/3d-print-3d-printable-fruits-vegetables-magnet-344191" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-3d-printable-fruits-vegetables-magnet-344191</a><figure class="media"><div data-oembed-url="https://youtu.be/qkTQuVmyaps"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/qkTQuVmyaps" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;

Banana Hook

装饰

TomoDesigns

Unleash the magic of gift-giving with my enchanting 3D-printed Jumpy Present. This whimsical creation brings a new dimension to your celebrations, combining the charm of a traditional gift with a playful twist. Crafted with precision and designed for joy, our jumping present is a delightful addition to your collection of 3D-printed wonders.&nbsp;I used the <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=3991419&m=138211&urllink=&afftrack=" rel="nofollow noopener">BambuLab PLA Basic, Red, Bambu Green, Blue and PLA Silk Purple.</a>&nbsp;Every make will be featured on my Instagram if you add your handle and follow me :) Check out <a target="_blank" href="https://www.instagram.com/tomo_designs/" rel="nofollow noopener">my Instagram</a> if you want to see more designs like this or if you have questions!&nbsp;Do you want to support me or become a reseller of my designs? Go take a look at my <a target="_blank" href="https://www.patreon.com/TomoDesigns" rel="nofollow noopener">Patreon!<img src="https://makerworld.bblmw.com/makerworld/draft/210545/2023-11-23_ebf2c0d141219.gif"></a>&nbsp;

Jumpy Present

圣诞

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project.&nbsp;This design has been uploaded in two parts due to licenses.16/04/2023 - Please note assembly instructions have been amended. Please read tboroughly.The parts under Part 1 are remixed from Bambu Lab's side panel designs. As such these STL's are uploaded with respect to the Creative Commons license that was originally designated by Bambu Labs.All remaining parts under the part 2 download are unique and are not remixed. And have been uploaded with respect to the Star Trek IP and thus have been uploaded under a non commercial license. These parts are uploaded under ‘The Borg Cube P1P Mod - ( Part 2 ).’You can find Part 1 under my profile page or via the link below.<a target="_blank" href="https://www.printables.com/model/452113-part-1-borg-cube-p1p-mod" rel="nofollow noopener">https://www.printables.com/model/452113-part-1-borg-cube-p1p-mod</a>MAKE IT YOUR OWNThis MOD has a few options you can choose from. The front doors are optional, and there is even a version compatible with the official Bambu Lab P1P lid. So if you want a door a lid, the options are available to youWARNINGTake note, if you decide to print the lid compatible version, I'd recommend printing the outer shell parts in PETG.  If you are later planning to print on your P1P materials such as PETG or other such materials that require high temperatures, then I would recommend printing the outer shell parts in PETG. This is important.  Think carefully about which material to print the outer shell in.  If you are not sure, print the outer shell in PETG.  Also note, if you are planning to later print ABS, ASA, due to the high temperatures required I cannot recommend this enclosure.All parts are printable on a Bambu Lab P1P.But take note the corner parts were printed on the slowest setting on the P1P.Please download the assembly instructions and follows these for the assembly.&nbsp;This MOD will use allot of filament.Before you all start ordering Black Matte PLA, as an alternative, you can always order pla in various colours and spray paint a few light layers of primer and then spray paint a number of light layers of matte black onto the parts. This would probably work out cheaper and would be a good way to use up any other filaments you have lying around.&nbsp;The filament overview for Part 1 and Part 2 STL's are below.For a filament requirements per part breakdown, please refer to the ‘Filament Requirements per Part’ PDF. it was too long to add here. :-/For reference approximately 330 metres per 1kg of filament.<figure class="image"><img src="https://media.printables.com/media/prints/452113/rich_content/fd9ada52-fbf1-43c5-b7c1-22b73491b713/image.png"></figure>The video that inspired the unique door mechanism is below. :-)Video by: I SIMPLY BUILT IT.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/GxwXKr38rnQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/GxwXKr38rnQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Part 2 - Borg Cube P1P Mod

lindnjoe

Warning!! This takes patience to put together. Round Deer and Snowman Lantern with 3 thin layers that fit into a base. The layers have tabs on the bottom that fit into the slits on the base. The front layer with the snowman and deer is printed in two parts, you will need to put those two layers together to make one. The layers are printed very thin at 0.2mm. Be careful when taking them off the heat bed. Slide the tabs on the end into the slits on the opposite end.You can size up or down. For best results size up.I recommend a dab of glue on a couple tabs per section to hold the round layers to the base.3 Layers to print and 1 base. &nbsp;A tea light will sit in the middle. You need patience when putting this together.

Deer and Snowman Round Lantern

Jorge Rui

<h3>Introduction</h3>This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more.but it can also be used for anything else, with saving writing material, drawing etc.<ul><li>This gray module you see is specific to 100x150mm index-cards (4x6 inches). To get an idea of the dimensions, it allows you to put a little more than 700 cards of 180g/m^2</li></ul><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_xznmnldpwl14.jpg"></figure>Of course, in the case of a modular system it is possible to accumulate as many modules as you need, that is, the system will grow according to your needs.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_1adne8yera7t.jpg"></figure>You can use colors for each of the groups, thus organizing your workflow.<h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_oa9zzg75e1an.jpg"></h4>And a new 76,2x127,0mm (3x5 inches) that you can find in “3x5 module.3mf” in files.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_cfcdbdafdbe5d.jpg"></figure><h4>Printing</h4>These cards are the second largest, and so as you can see the boxes are not small either (like I&#39;ve said in the beginning, they use almost all the print bed area (PRUSA MK series). You will have to wait a few hours before you can use your slip-box, but you will get it and it look fantastic. If you want other dimensions send a message or change this to your needs.It is however a remarkably simple impression, without supports, without anything special. The infill is up to you, the default 15% is ok.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_phzp7i2ry0gj.png"></figure><h2>Change log</h2>(26-09-2023) - Added some tabs, maybe they help. Only 2 layer thickness.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_3d743f3b1a109.jpg"></figure><ul><li>Added a 3x5 box to files.</li></ul>And a diferente application, board games sleeves and baggies, thanks to <a target="_blank" href="https://makerworld.com/en/@marco.boschetto" rel="nofollow noopener">marco.boschetto</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2024-06-27_1e261084396fc.webp" width="1080" height="1440"></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.&nbsp;

Zettelkasten Index boxes (Slip Box)

储物

Murata

<figure class="media"><oembed url="https://www.youtube.com/watch?v=jArIfws3gts"></oembed></figure>I designed this toy for my 3 year old to play with so it is intended to be robust enough to survive rough play, and the bucket is slightly oversized for more fun. There’s also an accompanying <a target="_blank" href="https://makerworld.com/en/models/58279" rel="nofollow noopener">dump truck model</a>.&nbsp;Please let me know if any parts break and leave feedback on anything that could be improved upon in the design.&nbsp;The final model is roughly 80 mm wide and everything is assembled with snaps (no glue or fasteners). The only tool required is a coin to tighten the body and tracks together. And there is a hollow pocket for some old AA batteries to add a bit of weight to the body. These are purely optional.&nbsp;Most moving parts are designed with 0.2 mm clearances which work fine on the Bambu X1C but might fuse on other printers. If any joints are frozen or too tight to assemble, try setting <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">XY Contour Compensation </a>to -0.05 mm. The tracks are offered in two variants, 0.15 mm clearance and 0.2 mm clearance in the raw files. My print came out nicely with 0.15 mm clearance track, but I understand this is not possible on all printers. The tracks show the build-plate side, so they will look a bit nicer if printed on a textured plate.&nbsp;<h3>Build Notes</h3>Be careful to install the H-link build plate face out. It’s a common mistake.&nbsp;When loosening joints for the first time, grab or pry as close to the pivot as possible. If a joint is a little bit stiff, it’s pretty easy to snap a piston by pushing on the end.&nbsp;<h3>History</h3>2024-03-30: Added some extra brim to boom cylinders to help with adhesion.2023-12-04: Minor updates to boom to reduce stuck or broken parts and improve bed adhesion.2023-10-13: Several minor design fixes to make parts more robust. I&#39;ve also included half-length track stls for smaller build plates. You need 4 of these per model. And I&#39;ve included a step file of the assembled excavator so that you can preview different colour pallet ideas. And lastly, there is now a single plate profile that crams the whole thing onto one plate if you&#39;re feeling confident and don&#39;t care about colours.

Tracked Excavator

玩具

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

装饰

圣诞

p1s

灯

储物

玩具

a1