The way these or any other tweezers are shaped it is hard to get them to lay out in a way to avoid supports. It took quite a bit of cleaning up and filing to get these cleaned up. But all in all, when finished they turned out fairly decent. I myself gave up after printing 5 of these. I'm pretty sure that if I used a different filament like PETG If the tweezers are made using PLA would make this come out much cleaner. As well I would change the top interface layers from 2 to 3 and change the top z distance to 2.9 or 3.0. That would probably do it.

Tweezers came out great. Minimal clean up if any. Nice print.

Very nice print. Nice detail. Came out well.

Very nice print. Came out well.

Very nice print. Came out well.

Very nice print. Came out well.

I like this design. I wanted a clip that did not clip to the rim of the spool. I use vacuum bags and the clip protrudes and can cut into the bag when I have it under a vacuum pressure. I tried this Regular print first but clip was too loose and would slice along the filament. I tested it on Bambu Lab Basic and Sun. I then tried the Half Size Tight Fit profile and Vola, it worked perfectly so I printed about 80 of those. Just what I was looking for.

I like to use a ceramic blade when working with food packages and other things that have to do with food related items. I got tired of just holding the blade within my fingers. I was going to make a handle for the blade but figured I would look on MakerWorld first. And of course there were several and this looked to fit the bill. Its design was close to what I would have created so I printed it and gave it a whirl. The blade fit in the handle nicely. The cap/cover was extremely tight and would not slide on the handle at all. I sanded all sides that made contact with each other and it finally fit. Not a big deal. All printers and filament are not exactly the same as the next persons. I have 5 Bambu Lab printers and 3 of them will print ever so slightly from the next. Even after calibrating them. Any way, Nice design and model none the less.

I like this design. I wanted a clip that did not clip to the rim of the spool. I use vacuum bags and the clip protrudes and can cut into the bag when I have it under a vacuum pressure. I tried this Regular print first but clip was too loose and would slice along the filament. I tested it on Bambu Lab Basic and Sun. I then tried the Half Size Tight Fit profile and Vola, it worked perfectly so I printed about 80 of those.

For being as small as it is the quality came out great. Very cute. I did notice that the little white "puff ball" that is supposed to be at the end of the little red Santa had is not at the end of the had, but beside it. It is clearly not connected to the hat, it is just floating out there. I don't mind though. You have to examine it to notice. Check out the picture. I turned the one on the right to the side so you can see what I am talking about.

Adorable, and a very nice print. Came out great.

Very cute. Great print.

This is a very neat model of the Stay Puft baby. Really cool. The print quality is great.

I love this little dudes face. Print turned out great.

Works well. I had to downsize about 7% to make it tight enough to where it wouldn't slide along the tubing I am using.

Works great. Just like the ones that came with the printer.

The box printed without any errors and with great detail. No issues. Very nice box.

Out of all the adapters this works the best for me.

Works very well.

Worked great. Good fit and angle. It has helped quite a bit when you seem to need an extra hand.