sevendeuce

chrisax212

When swapping a fully populated switch it&#39;s always a hassle with all the cables.With these fake patch panel you can easily mark and organize them.&nbsp;Gen2 modular designGen2 is splitted in the base unit and 4 separate side panels with labeling.For the base you can choose between 0, 1 or 2 round eyelets or velcro eyelets and with or without magnet holes.<img class="image_resized" style="width: 27.35%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151040/design/2024-06-04_9265f652915eb.png">For the label panels you have X1 to X8 as markers and 1-48 for the ports.Please pay attention to the port porder your switch uses:<img class="image_resized" style="width: 39.78%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151040/design/2024-06-04_fe8a95d6de47d.png"><img class="image_resized" style="width: 34.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151040/design/2024-06-04_64f1ce3a45c2f.png">As you print the panels lying flat on the bed, you can easily change filament to have colored labels.The panels should just snap in.&nbsp;Gen1 monoblock designThe old version is easier to print and bit more compact.Port ordering is Cisco style only.They are labeled 1 to 12, 13 to 24, 25 to 36 and 37 to 48, so they suit 24 and 48 port switches.In case you are working on more than one switch, there are 6 sets labeled X1 to X6 on the side.&nbsp;Gen1 and Gen2Optional add 4x2mm magnets to be able to click them together. As there are different tolerances, you may need a drop of glue.(<a target="_blank" href="https://s.click.aliexpress.com/e/_DlZcUr9" rel="nofollow noopener">aliExpress</a> <a target="_blank" href="https://amzn.to/3JDFjWP" rel="nofollow noopener">amazon.de</a> affiliate links)&nbsp;Let me know, if you need a different versions (eg: ports, labels).&nbsp;Also see my other network equipment:<ul><li><a target="_blank" href="https://makerworld.com/en/models/151040" rel="nofollow noopener">RJ45 dummy Patch-Panel</a></li><li><a target="_blank" href="https://makerworld.com/en/models/435065" rel="nofollow noopener">LC fiber dummy Patch-Panel</a></li><li><a target="_blank" href="https://makerworld.com/en/models/482423" rel="nofollow noopener">SC fiber dummy Patch-Panel</a></li><li><a target="_blank" href="https://makerworld.com/en/models/142669" rel="nofollow noopener">19&#34; Rack mount helper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/137041" rel="nofollow noopener">RJ45 Caps</a></li><li><a target="_blank" href="https://makerworld.com/en/models/141370" rel="nofollow noopener">19&#34; Rack Cage Nut Tool</a></li></ul>&nbsp;

RJ45 dummy Patch-Panel for switch swapping 

Networking

humebeam

Hydra PRO - Advanced Bambu Lab AMS

Bambi Upgrades

sirfragalot

Had some ~19mm O/D metal tube floating around the garage; so decided to put it to use.&nbsp;The holes on the end brackets are meant to be snug on a 19.00-19.20mm tube. I tapped these on with a rubber mallet. The centre holes bracket holes are 20mm so can be slot onto the tube easily.&nbsp;My shelf is 1.30m long and when fully loaded with heavy spools there is a little sag (less than ~10mm) so if using the same cheap tube that I am I would recommend placing a centre support bracket roughly every 1m.&nbsp;I printed mine in the PLA-CF sample I got with the X1C. Each side is 78.35g and you have the centre-minimal is 61.5g. They do not need to be printed in CF, but I would recommend 0.28mm layer heights, at least 4 tops and bottoms and 4 or 5 walls. Remember, a full spool is roughly 1.25kg so a 1m shelf (15 spools) will weigh around 19kg.&nbsp;Screw to wall with appropriate fixings for the wall. (I used 5x50mm wood screws - as my office walls are 18mm ply)&nbsp;&nbsp;

Filament Spool Wall Rack / Shelf

Filament Stuff

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Gray At layer #14 (1.2mm) swap to Light Gray At layer #18 (1.52mm) swap to White for the rest.

Lion Roar - Hueforge 4 color filament painting

Hueforge

OldSpice3d

Update 2 with Print profile : New version added called 1 layer: - 1 single layer for all colors, perfect for PEI or engineering plate - New box adapted to the 1-layer version with reinforced thickness to avoid too much flexibility of the back plate. - Also an addition of a 1-layer version that adapts to the original boxThis new 1-layer version features an insert that fits into the box, so there's no need for glue, but it can still be removed.&nbsp;Update: now middle back plate with hole, .3mf updated too :)&nbsp;Everything is already set up properly in .3MF&nbsp;I added some light cover for the back when light go through seams, it's in “dowload raw model files” button and select original_V1.zip&nbsp;But for people having issues with light through seams, i think black cover tapes could be better than pla printed parts&nbsp;Tell me in section comments what can i improve :) &nbsp;Enjoy!

Harley Davidson LED logo lamp

Lightboxes

Cell Phone and Table Charging Station (Wall Mount)