seregasher

Metric unit screw/bolt lenght & thread measuring tool, similar to bambulab design, but with wider scale of sizes. Can be printed on any material I prefer to use 2 colors to make numbers stand out better

Screw gauge (M4-M10)

Приспособления

Marius6182000

Ps5 Game stand

Sevro

Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- ASA ( PLA is possible but can bend )If you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.&nbsp;Two Versions.There are two versions of Ring LampV1  - version 1 - First version of Ring Lamp. It is designed for 8 mm LED stripe.V2  - version 2 - Second version of Ring Lamp. It is designed for both 8mm and 12 mm LED stripes. I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers.&nbsp;In the meantime, some designers created their own fronts for version 1. If you want to use fronts from other designers, make sure they are the right size. If they are too small, simply enlarge them to 110% in the X and Y axis as in the image below.&nbsp;<figure class="image image_resized" style="width: 38.09%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png">&#34;</figure>&nbsp;Electric parts you need.The easiest way is to buy electrical parts designed specifically for a ring light. Provides easy installation without the need for soldering.It is available on Amazon <a target="_blank" href="https://amzn.to/3zAnd6c" rel="nofollow noopener">https://amzn.to/3zAnd6c</a>It works with V1 and V2. <figure class="image image_resized" style="width: 37.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-06-30_880ecf419c351.jpg">&#34;</figure>You can also buy only the LED Strip from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>It works only with larger V2&nbsp;<figure class="image image_resized" style="width: 30.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-06-30_4c071b0333c11.jpg">&#34;</figure>&nbsp;&nbsp;By purchasing the above products, you support my work&nbsp;&nbsp;Of course, you can also search for each part separately and solder it yourself. You will need<ul><li>led stripe - best are LED COB </li><li>charger for LED strip</li><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 21.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp">&#34;</figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 18.17%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png">&#34;</figure>&nbsp;Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

Лампы

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

Игрушки

Ukdavewood

Update 2/2/24Added Extra profile containing optional underwater parts and a stand - which can be bolted on the bottom with 3xM4 x 15mm Cap head screws.&nbsp;&nbsp;&nbsp;Update 13/2/24Updated the underwater print profile to move the section breaks so that they line  up with the main waterline model.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-02-13_4007ddc013b068.jpeg"></figure>Also doubled up  the tiny azipod motor parts - as it doesn't add much to print time and will then give some spares in case of breakages or printing issues.&nbsp;Also slightly improved the adaptive layer height settings.&nbsp;&nbsp;Update 4/1/24.I have added the underwater hull part of this ship to my 1:1000 scale version here<a target="_blank" href="https://makerworld.com/en/models/15006#profileId-14776" rel="nofollow noopener">https://makerworld.com/en/models/15006#profileId-14776</a>&nbsp;<figure class="image image_resized" style="width:29.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-01-04_4a0113e166b658.jpg"></figure>If there is any interest in a version scaled for this 1:500 version please let me know via the comments I will create one.&nbsp;&nbsp;&nbsp;Scaled at 1:500 and mutli coloured - this model is multi plate, quite large and requires a lot of time to print.It is recommened that people try one of the 1:1000 or 1:1250 version first - which print without supports on a single plate.&nbsp;Updated 31/12/23New version of the Dome on deck18 added as a 2nd + 3rd plate on the same print profile as was uploaded on 21/12&nbsp;Updated 21/12/23Alternative version of deck 8 included in seperate profile - to avoid issues with lighting channel showing through very thin deck layer.&nbsp;Updated 9/10/23:Corrected a problem with a duplicate part from deck 15 being present and one part from deck 14 being missing.See Plate 14.&nbsp;Updated 30/9/23:Corrected a problem with the port side of the hull section not slicing correctly.&nbsp;Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are capable of printing these models quite well at a 1:1000 scale on a single plate. Seperate entries in Makerworld have been created for the 1:1000 versions.&nbsp;&nbsp;Update: 8/9/23:A new version of the model has just been updated that addresses points 2,3,4 & 5 below.&nbsp;&nbsp;Update: 18/8/23Following feedback from the 2 successful end user prints of this model I am planning to make the following updates:<ol><li>Enhance the build instructions - I have already made some updates to bring these instructions in line with the slightly more detailed ones on printables.</li><li>Thicken up some of the more fragile top decks - that are quite difficult to remove from anything other than a cooled down textured sheet</li><li>Change the settings in the build files to increase the use of brims - to avoid corner lift off</li><li>Include built in part numbering on the main deck parts.</li><li>Provide a version of the centre hull section with slightly wider tollerances - to make it easier to push parts together</li><li>Provide simpler smaller scale versions (1:1000) of this ship for single plate, single colour and multi colour printing.</li></ol>&nbsp;Third ship in a series of Seven 1:500 scale Models of P&O Cruise Ships - Iona - for personal use only.&nbsp;Iona is the largest P&O Cruise Ship currently in service.&nbsp;Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).&nbsp;STL files not available individually as there are too many.Designed using Fusion 360.Model is approximately 3 build plates long - so needs to be printed in separate sections which are slotted together at deck level, then each deck is bolted together using M4 Cap Head Screws.Printing will take well over 60 hrs in total - in separate plates which average about 2 hrs printing time each - but some of the more complicated plates take in excess of 13 hours to print.&nbsp;For reference here are the filament colours I have been using in order of quantity - with a best guess at Bambu Lab equivalentseSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament Cold White eSUN PLA+ Silver SunLU PLA+ Blue SunLU PLA Red 1kg 1.75mm PLA 3D printer filament Printer - With coil (Gold Color) SUNLU 3D Printer Filament PLA+ Plus Grass Green Aldi Balco Blue 1kg SunLU PLA Yellow Bambu Lab Orange ICE Filaments ICEFIL1PLA104 PLA filament, 1.75mm, 0.75 kg, Barbaric Brown eSUN PLA BLACK  With the quantity of white being about 10x the rest.My best guess at equivalent Bambu Lab Filaments to these would be:Bambu Lab PLA Basic Jade White Bambu Lab PLA Silk Silver Bambu Lab PLA Basic Blue Bambu Lab PLA Basic Red Bambu Lab PLA Basic Bronze Bambu Lab PLA Basic Green Bambu Lab PLA Matt Ice Blue Bambu Lab PLA Basic Yellow Bambu Lab PLA Basic Orange Bambu Lab PLA Basic Brown Bambu Lab PLA Basic Black&nbsp;Around 22 M4x16 and 4 M4 x 10  &nbsp;Build instructions. (updated 18/8/23)&nbsp;<ol><li>Print plates in the order presented. Writing deck numbers onto printed parts can help with organisation. **</li><li>Recommend textured plate is used for most prints - especially those with only 1 layer in some parts - such as deck 19 Bow. Cool plate however useful for very long thicker prints - such as Hull if being able to pause prints overnight is a requirement. **</li><li>For the thicker hull sections the dovetail joints are quite tight so a small amount of trimming of the dovetails may be required to get the pieces to slot together.</li><li>On the stern section of the hull I have included some slight overlaps to stop corners from being round that will need to be trimmed off. **</li><li>It is recommended that a small hammer is used to gently tap the dovetail joints together - going slowly from side to side - until the sections are flat.</li><li>Completed decks can then be bolted together using the holes with slots for screw tops.</li><li>Lifeboats need to be slotted into deck 7 tabs - it may be necessary to slightly widen the slots in the lifeboats with a screwdriver.</li><li>The canopy on deck 19 also slots into some fairly tight holes - so again these might need to be prized open slightly with a small screwdriver</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2023-08-18_a2c7dd1a41697.jpeg"></figure>&nbsp;&nbsp;Model has only been printed once so far, and was re-sliced for this upload.Further details of the design and built process are available on the Bambu Labs forum AMS section.Details of this model will also be posted on<ol><li>The Bambu Lab Official Facebook Group</li><li>The P&O Facebook Group</li><li>The Ship Models Facebook Group</li></ol>&nbsp;This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.&nbsp;&nbsp;f360 ref: iona 5b Arvia V1 S500 v122. 30/9/23  &nbsp;&nbsp;&nbsp;

Приспособления

PS5

Лампы

Игрушки

Сувениры