sdeveer

Print3DZ

Update: I designed a new one from scratch that is backlit and completely modular! You can find it here: <a href="https://makerworld.com/en/models/157141#profileId-172259" rel="nofollow">Tesla Model 3/Y Backlit Modular Center Console Organizer Tray</a> This is a remix of Constantin's center console tray with removable divider. It is designed to fit in Tesla model Y and model three vehicles.  Changes: 1. I removed the rail at the bottom of the tray as it's not necessary, so that if you remove the divider, you have a completely flat tray.2. Removed all text from the model as I like a clean look. Be sure to print the tray in a high temperature filament, so it does not warp.  Hope you enjoy 😊

Tesla Model 3 / Y Center Console Tray With Removable Divider

rondel

&nbsp;Simple customizable garden labels. Support both text and icons (only in desktop OpenSCAD, Bambu parametric maker doesn&#39;t support uploads). Available in 2 versions: flat and raised text. The flat version requires 4 filament changes (in the default text depth configuration) and the raised text one requires just 1.&nbsp;How to print the flat version:<ol><li>Prepare your sign.</li><li>Export both `label` and `body` modes.</li><li>Import both STLs at the same time and when Bambu Studio asks if you want to import as a single object click Yes.<img class="image_resized" style="width: 35.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486677/design/2024-06-06_7d5d7b2e79c8.png"></li><li>Auto orient the model (the text and icon should face down)</li><li>Change the first layer filament sequence to start with your text and icon color</li></ol><figure class="image image_resized" style="width: 53.96%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486677/design/2024-06-06_4f5417f0c0a58.png"></figure>How to print the raised text version:<ol><li>Prepare your sign (with raised text)</li><li>Export in `both` mode.</li><li>Import into bambu studio</li><li>Make sure the text is facing up</li><li>Slice</li><li>In the preview navigate to the layer where the text start printing, right click the plus sign and select Change Filament.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486677/design/2024-06-06_e4b1cb13fe798.png"></figure>I recommend 100% infill and printing in PETG as the signs will be outside.

Customizable garden labels

Signs

Supergrapher

Update:18th of Jun 2024<ol><li>Just tidying up of the files and a small update for the nozzles. </li><li>The Paint-On numbered covers are kept as a seperate file</li><li>The extra nozzles are now part of the main file.</li></ol>&nbsp;12th of Jun 2024<ol><li>Tweaked the port holes so it grips the PTFE tubes better. (In case you don&#39;t know, you can use PTFE tubes instead of the printed nozzles)</li><li>Very slightly narrow the for hole for the hygrometer so it fits tighter.</li><li>Changed the style of the brackets and the fonts to match that of the Covers</li></ol>11th of Jun 2024<ol><li>Tweaked the internal geometry of the nozzles to reduce rubbing as the filament travels through it. </li><li>If you feel are you getting too much resistance or rubbing from the original Nozzles, you can try wider Nozzles. You can find the Nozzle Pack under print profiles. These nozzles comes in a choice of Original, +0.05 and +0.10. </li></ol>8th of Jun 2024<ol><li>Sliced abit off the side of the cover to make the cover easier to fit when using the top mount. I missed the measurement, it will fit, but just barely. If you are using my Clip-On Top Mount, I&#39;ve updated the file so it works now. </li><li>I&#39;ve brought back the Paint-On numbers for the cover. You can color it yourself (the stencil will appear when you use the Bambu Studio Paint function) or you can just use the one I uploaded under print profiles. <img class="image_resized" style="width: 45.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-09_cc8d5d3eff2808.jpg"></li><li>Small adjustments to the clips to make it snap tighter. I&#39;ve also reduced the size of the release lever incase it catches on the spool.</li></ol>&nbsp;&nbsp;Finally I&#39;ve created the ULTIMATE FILAMENT SPOOL ENCLOSURE for the AMS LITE!&nbsp;Thank you for all the support and feedback on the previous design. I’ve incorporated everything I’ve learned to create a new design that I believe is better and more user-friendly. Now, installing and feeding filament is so much easier. The cover is attached using clips, making the process more straightforward. No additional tools or parts are needed, and you have a choice of action panels and action buckets to suit your needs.&nbsp;My favorite action panel is the dual monitoring (inside/outside) hygrometer panel.&nbsp;This is also compatible with my and Bambulab&#39;s AMS lite top mount. You&#39;ll need to remove the screw on the Bambulab version.&nbsp;Installation is also relatively easy. Let’s get started!&nbsp;NOTE PLA for all partsPETG for the clips&nbsp;InstructionsConnect the buckets together as shown using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_c0d1267bb22298.jpg"></figure>Install the plugs by press-fitting them. They don&#39;t need to go in all the way; stop once they are tight. The round-based ones are for the filament to go through, while the square ones are for sealing. &nbsp;I&#39;ve also designed it so that you can use a PTFE tube if preferred. Just gently push it through the hole. I would recommend a very short tube of 2 to 4cm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_d54667eaaf1b5.jpg"></figure>Install the setup onto the AMS Lite. Connect the covers and your choice of action panel together using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_cbde24d2cc6688.jpg"></figure>Work your way around the perimeter of the hygrometer and it should pop into place in the recess. It sits flush when installed correctly. Note that the hygrometer is held in place by it&#39;s brim and not the clips.&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B07GR67G1M" rel="nofollow noopener">https://www.amazon.com/dp/B07GR67G1M</a><a target="_blank" href="https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb" rel="nofollow noopener">https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-17_60b39b7d93afc.jpg"></figure>Install your choice of Action Buckets.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_2a590d0bc9a088.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_69b8c7c9fe3ff8.jpg"></figure>Attach the cover using the clips. You may also also install the brackets for additional stability.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_22d56660fab948.jpg"></figure>&nbsp;&nbsp;That&#39;s it, I guess the rest should be quite self explanatory.&nbsp;Have Fun!

Ultimate Filament Spool Enclosure 封箱 for AMS Lite

Printer parts

emp3thy

As Han Solo says: “Hokey religions and ancient weapons are no match for a good blaster at your side, kid”.&nbsp;This is a great blaster model. It's easy to put together, prints well and the supports on it can be removed without much effort. The barrel prints at an angle not because I'd had a couple of beers before doing the model, but because, at that angle it prints some of the thin vertical parts of the barrel well and without too many supports.&nbsp;I've put in a couple of model tweaks here to make this print a little better and it prints really well on a P1S.&nbsp;A word of warning: I tend to use Creality filament because it's cheap, it's reliable and it paints well, so you may want to have a quick look at the filament/flow rate settings for the filament because Creality filament prints well at a slightly lower flow rate than the P1S default.

Han Solo Blaster

Star Wars

Kiloler

I didn't find a small death star lamp. So I decided to remix one. Fits nicely into the Ikea Fado 17cm lamp. <a target="_blank" href="https://www.ikea.com/de/de/p/fado-tischleuchte-weiss-40455437/" rel="nofollow noopener">https://www.ikea.com/de/de/p/fado-tischleuchte-weiss-40455437/</a> (german link) Have fun printing. It looks super nice!Printed it with supports. But I don't think that they are needed at all. All my moon lithophanes printed fine without supports.&nbsp;Edit: Yes there are a few flaws around the weapon. But this is just a remix and there are limitations when reducing the size of a model. Especially in cases of lithophane prints. So keep that in mind. Nevertheless the outcome is very acceptable.

Death Star Lamp - Ikea Fado 17cm

IKEA

Thom

ungodly

Unlock your creativity and elevate your typing experience with our DIY Launch Pad. Perfect for enthusiasts, designers, and tinkerers alike, this downloadable design opens up a world of customization possibilities for your mechanical keyboard setup.&nbsp;With three distinct offerings, including options for a 5-degree typing angle, 0-degree typing angle, and a customizable model for users to unleash their imagination, this community-driven project empowers users to tailor their keyboard experience to their unique preferences. Pair this design with the compatible PCB available on our website for seamless integration and functionality.&nbsp;Whether you're a seasoned keyboard enthusiast or just starting your journey into keyboard customization, our DIY model invites you to join a vibrant community of creators and share your designs, modifications, and innovations.&nbsp;Unleash your creativity and take your mechanical keyboard setup to new heights with our DIY Launch Pad. Download now and start building your dream keyboard today! Build Requirements:<ul><li>Launch Pad Case (0deg, 5deg or DIY)</li><li>Launch Pad Knob (standard or DIY)</li><li>Launch Pad PCB Kit (pcb, oled, encoder)</li><li>20 mechanical switches</li><li>numpad keycaps</li><li>(optional) for numpad layout:<ul><li>2x - 2u stabilizers</li></ul></li></ul>&nbsp;Launch Pad PCB ( <a target="_blank" href="https://ungodly.design/products/launch-pad-pcb" rel="nofollow noopener">link </a>)Features:<ul><li>Hotswap PCB</li><li>OLED display</li><li>Midi slider</li><li>Rotary Encoder (optional)</li><li>Per key rgb backlight</li><li>QMK & VIA programmable firmware</li></ul>&nbsp;

CAR

Signs

Printer parts

Star Wars

IKEA

Thom

Project