Tyler

3dprintnow

EASY PROCESSYou MUST INSERT THE G CODE:&nbsp;<ol><li>Select the edit button to the right of your printer model to bring up printer settings.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_cdb75d67e255c.png"></figure>2. Select the “Machine G-code” tab<figure class="image image_resized" style="width:73.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_beaed6beeda3a.png"></figure>3. Scroll down to “Layer change G-code.” Now copy and paste this code above the current G-code (DO NOT REMOVE the current G-code, simply copy and paste it above.&nbsp;{if layer_num==0} M104 S190{endif};{if layer_num==28} M104 S195{endif};{if layer_num==53} M104 S200{endif};{if layer_num==78} M104 S205{endif};{if layer_num==103} M104 S210{endif};{if layer_num==128} M104 S215{endif};{if layer_num==153} M104 S220{endif};{if layer_num==178} M104 S225{endif};{if layer_num==203} M104 S230{endif}; &nbsp;<figure class="image image_resized" style="width:70.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474105/2023-12-20_50112f027f66b.png"></figure>YOU ARE DONE :) You can slice the file, and select Temperature colour scheme to check if it worked and you will see a rainbow coloured model with different colours for each of the layers

TPU Temperature Tower (temp tower) G Code 

Tests

madizmo

EDIT: Added some wider tapered sides to the guide as it could get caught on spools with large openings on the spools, need feedback if anyone still has this issue!&nbsp;This is the newest version of the filament guide for my <a target="_blank" href="https://makerworld.com/en/models/156593#profileId-171555" rel="nofollow noopener">AMS saver</a> that works amazing! This version has a more tapered inlet like the one on the AMS feeder so when it gets to the end of a spool it will be able to pulled the bent end of the filament through. The next best part is this one actually threads on to the bowden tube and bites in very well so no more chance of them falling off on a retraction and getting tangled in the spool. My tests were done in PETG on the P1S using generic PETG profile and fit perfect with the Bambu PTFE tubes. If you find them too tight or too loose either scale them a bit or adjust your flow rate. As they are you do have to put a bit of force to thread them on, let me know how the work for you!&nbsp;The arrow side faces up to the lid on install!

Tests

X1C upgrades