sbiljeek

Lichten

So! here we are again.. After a lot of time, some war and downtime here I am again thinking how to make my workspace a little bit more organized. The Filament Swatch Display by @<a target="_blank" href="https://makerworld.com/en/@BradFTBT3D" rel="nofollow noopener">Brad - FTBT 3D</a> I thought to myself how can I mount this wonderful piece of art on my Ikea Skadis pegboard.. After some design and a lot of testing I came out with this 2 part Dock/Shelf or whatever you wanna call it. As it described this is a mount for the Filament Swatch Display. The printing is very simple with a little support on the mount itself. For this small printing project you&#39;ll need a few things: 1. X2 M4 10-14mm Screws 2. X2 M4 inserts 3. Soldering iron 4. Some patience haha The assembly is very simple: 1. Insert the inserts with the soldring iron to the dedicated holes in the Skadis mount (Like in the photo) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449078/design/2024-04-30_f1e467020402e.jpg"> 2. Thread the 2 M4 screws through the Dock holes and tight them with a the allen key to the mount (Like in the photos) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449078/design/2024-04-30_16b421b157f88.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449078/design/2024-04-30_d09cb95aad70b.jpg"> 3. Mount this Dock to the Skadis pegboard and enjoy the free space on your desk! (Like in the photo) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449078/design/2024-04-30_3a38ba184ea41.jpg"> 4. That&#39;s it! You have an awesome mount for your Filament Swatch Display (Like in the photo) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449078/design/2024-04-30_c77df9a514ec9.jpg"> BTW, I printed the Filament Swatch Display and this dock with Bambu Lab Black Charcoal PLA and Bambu Lab Matte Grey filament.

Filament Swatch Display - Ikea Skadis Dock

IKEA Skadis

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>