saratate

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">

Double Action OTF Knife/Comb

Fidget

打客Side_ReverSea

<h2>Bambu Gravity knife scraper 重力竹铲刀升级MakerWorld special特别版。</h2>需要M3*4或5mm，M4*6~8mm screws 2 each 各两颗

Bambu Gravity knife scraper 重力竹铲刀升级MakerWorld special特别版。

Cool

reddadsteve

Kermit the Frog, a Muppet character by Jim Henson.Kermit serves as the straight man protagonist of numerous Muppet productions, most notably Sesame Street and The Muppet Show, as well as in other television series, films, specials, and public service announcements through the years.No supports are required. If you have the proper filament colors, no painting is needed.The assembled model is 140mm tall.Enjoy!<h3>Print instructions</h3>Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10%Notes: Refer to the notes below for helpful printing and assembly instructions.<hr/>Building the Model Colors (there are no multiple printed pieces)Black: eye_black_right eye_black_left mouth_blackRed: mouth_top mouth_bottomGreen: head bodyWhite: eye_white_right eye_white_leftYellow: ruffPink: tongue<hr/>Printing and assembly tipsPrinting tips 1-No supports are required. and I printed all the pieces without a brim or raft.2-The parts should fit nicely when printed cleanly or with a slight first layer squish... Assembly tips: 1-The left/right black eye pieces are interchangeable. I post all my parts exactly as modeled, even if they are duplicated.2-Position the ruff on the body, noting that the ruff should sit very comfortable over the shoulders.3-**Important: the mouth_top part is printed flat but the roof of the mouth is curved. Glue the mouth_bottom to the head first, then try and bend/flex the mouth_top piece so it fits the roof of the mouth a bit. You may need to hold this piece up while the glue is setting.4-The tongue fits into a slight groove in the mouth_bottom piece. The mouth_black piece should be simply centered left/right and placed as far back on the mouth_top piece. The points of the mouth_black piece should point forward. I wanted to keep the mouth_top piece as thin and flexible as possible, so no indent was added for the mouth_black piece5-Refer to the assembly diagram for putting the model together. The model is meant to be glued.

Kermit

Frogs

dominik.gneist

Cactus Coaster / 3D-Puzzle Toy&nbsp;Inspired by an Amazon article, I constructed this cactus coaster / 3D puzzle.( <a target="_blank" href="https://www.amazon.de/Untersetzer-Kaktus-Set-Blumentopfhalter-Kaktus-Geschenke-Heimdekoration/dp/B095PHKW8G?th=1" rel="nofollow noopener">https://www.amazon.de/Untersetzer-Kaktus-Set-Blumentopfhalter-Kaktus-Geschenke-Heimdekoration/dp/B095PHKW8G?th=1</a> )&nbsp;Perfect for the next barbecue party in the garden or as a puzzle game for children or adults :)Up to 10 cactus leaves fit in the pot for easy storage.&nbsp;No support needed.I uploaded the entire assembly as a STEP and Fusion360 file, as well as an STL file for each individual part.&nbsp;Have fun with it!

Cactus coaster/toy

Plants

PRINT_ON_DEMAND

Licence commerciale disponible sur patreon : https://www.patreon.com/PrintOnDemand Le Pyroserpent est une variation rare et mystérieux de la célèbre espèce de Pokémon dragon-feu. Contrairement à ses cousins plus communs, le Pyroserpent présente des caractéristiques serpentines distinctes qui le rendent unique. Son corps est plus allongé et sinueux, avec des écailles brillantes qui reflètent la lumière d'une manière hypnotique.&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462577/2024-01-28_b51dd90685c53.png"></figure>

dracaufeu serpent pokemon PyroSerpent

Pokemon

Stirling.jon.swift

This is a small cartoon-styled rover. It was my first moving parts build and first print on the x1c. I think it turned out well! If you give it a try, be sure to leave a comment. Thanks!

DeskRover

Ryschweitzer

A book nook inspired by the Hogwarts Express. I&#39;ve cut the model into pieces for easy printing. I used super glue, hot glue, and some fairy lights to make it stand out. I&#39;ve attached an assembly guide below to help you put the book nook together.&nbsp;*ADDITION*I&#39;ve uploaded a remixed version of the Hogwarts Castle from @Usefulprint to work as a window box.&nbsp;Window Box Hogwarts Castle Extension: <a target="_blank" href="https://makerworld.com/en/models/405431#profileId-307284" rel="nofollow noopener">https://makerworld.com/en/models/405431#profileId-307284</a>&nbsp;&nbsp;&nbsp;

Hogwarts Express Book Nook

Books

Sh^ts'N'Giggles3d

I am not lucky enough to have a Hammerbarn close by lolso I printed my own GeraldI also added a plate of 4sharing is caringPlease like and share your creationsHappy Printing&nbsp;edit to add- I actually only have 1 ams but once the yellow on the belt was finished, I swapped yellow for white, and then when the shirt was finished I swapped for black and again to red once the black was finished. It sounds confusing and much but its pretty easy to do. I hope this helps

Gerald the Garden Gnome...Bluey

Disney

zuperbuuworks

<h4>IMPORTANT: If you use a P1S/P1P and experience issues printing the top of the head, please configure the print profile speed to 80mm for the outer wall, and give the model 3 walls. (thank you user PavorMaker who helped figure this fix out.) If you use the Textured PEI plate, a brim is necessary regardless of what machine you use. A brim is not needed if you use the Cool Plate in an enclosed machine, that has a stable temperature.</h4>This Kohaku model comes in two sizes; short, and long. The short dragon has 14 joints down its body, the long has 25 joints.The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.Due to the limit of 4 colours, the pupils are not black. A dab of acrylic or permanent marker works fine.I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn't need a brim either.&nbsp;Supports are not needed, so don't print it with any or you'll end up wasting filament and risk damaging the joints when removing supports. If you are having issues with the toes/claws not printing well, do the following:<ol><li>Turn supports ON.</li><li>Set the type to “normal(manual)”.</li><li>Set style to “snug”.</li><li>Tick the box for “touching buildplate only”.</li><li>Paint the base of the palm/fingers/toes in support paint mode.</li></ol>This way only supports are generated on the hands, and not anywhere else.You can add another two segments to the LONG version tail and neck to make it longer, but due to limited space on the hotbed, I wouldn't make the model itself larger. I wouldn't print it any smaller as the joints will likely lose strength.&nbsp;Pre-painted/coloured versions are also available!&nbsp;The joints can move in almost all directions. The arms and legs do not move.You can see the range of movement in this video:<figure class="media"><div data-oembed-url="https://youtu.be/xSSe9JOoXks?si=4sJp5R7leFCYHIMg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/xSSe9JOoXks" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This file covers PERSONAL use. If you want to sell prints of this model, please subscribe to my Patreon: https://www.patreon.com/thomastedwards