SanguineRane

Wall_Art_3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Protopasta White Transmission Distance: 21&nbsp;Swap Instructions: Start with Black At layer #9 (0.48mm) swap to White for the rest. <img src="https://makerworld.bblmw.com/makerworld/draft/356387/2023-12-28_22670c34418ee8.png">

Wolf_Art_2D

Hueforge

andythilo

This is my Voronoi edition of the Bambu reusable spool. Retains the filament marker inserts from my Honeycomb spools along with filament retension holes for re-spooling and tab for use with bambu refills. The tab can be easily cut off if needed. &nbsp;I have also re-sized this slightly adding 1mm to each side. Using a 100% infill (only adds 15g of filament per side), this brings its weight to match the OEM bambu spool as seen in the photos. The spool runs perfectly in the AMS. &nbsp;Filament markers can be downloaded from my Honeycomb edition spool - https://makerworld.com/en/models/73599#profileId-105962

Hueforge

Spools