ryujycool

generatorlabs

This project is an optional accessory for the Donkey Kong Arcade 3D Playfield project. That project can be seen here: <a target="_blank" href="https://makerworld.com/en/models/168687#profileId-185255" rel="nofollow noopener">https://makerworld.com/en/models/168687#profileId-185255</a>&nbsp;Although I created this specifically for the Donkey Kong project it could be used in other creative ways.The design consists of four corner pieces which are machined to accept eight I-Beam extensions. The eight I-Beams can be connected with joiners that look like riveted gussets to make any desired length. The gussets are a uni-directional design and will not interfere with the inner channel of the frame. Joiners will also conceal the outer visible perimeter. The I-Beams are designed to be cut to form a frame size you require.&nbsp;I-Beams attached to corner pieces should be glued in place. The pieces that attach near gussets/concealers do not necessarily need glue. I chose to keep my gussets un-glued just in case I had to disassemble in the future. I used foil tape to keep frame members from moving. My frame pieces had a fairly tight fit. Your print results may vary. Use your best judgement on final assembly and keep safety first when hanging objects from a wall.&nbsp;I hope you enjoy my work!  <h4>Print Settings</h4><ul><li>Printer brand:</li></ul>Bambulabs<ul><li>Printer: Bambu P1S</li><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: Standard</li><li>Infill: 15% or less</li><li>Filament color: Army Brown</li><li>Filament material: PLA Matte</li><li>Notes:</li></ul>This is a long print, so you don't want your investment of filament and time to go to waste. Make sure your hot plate is spotless, using Dawn dish soap and water, if using a textured PEI plate. I personally do not use adhesives with my textured PEI plate but your choice of filament and other machine settings may dictate a different strategy.The I-Beams can be cut to size with a miter saw or hacksaw once printed, to get a precise fit. If you know the exact size needed you can cut them in the slicer application also. The corner pieces and gap concealers will cover any small gaps. Make sure to install gaps covers in the correct orientation before using any glue. The gap concealers should wrap around the outside perimeter of the frame. The opening of the slot for the plexiglass and a backer board is 9.25mm.This design will require supports due to large overhangs. Do not try to print without enabling supports in the slicer.&nbsp;Different printers will have different tolerances and different filaments will have different shrink potential as they cool. I would recommend printing one corner piece and one I-Beam so you can evaluate how the pieces will fit, using your machine setup. With my printer and my choice of PolyTerra filament, the pieces fit snug.<h4>Post-Printing</h4>The elements of this design should fit together snug. If they fit too tight you may need to do some sanding. Do not force fit as it may split the joints. A small amount of E6000 Multi-Purpose adhesive should form a good bond between the pieces.<h4>How I Designed This</h4>I drew the elements of this design in Fusion360.&nbsp;

Frame For Donkey Kong Ardcade 3D Playfield

cuadros

braga3dprint

The 3D model of a lightbox featuring a cute Pikachu from Pokémon is an adorable and charming design. This delightful lightbox showcases everyone's favorite Electric-type Pokémon, Pikachu, in a relaxed seated position, radiating warmth and nostalgia. When illuminated, it brings Pikachu's cheerful spirit to life, making it a heartwarming addition to any Pokémon fan's collection. With its customizable size and color options, you can tailor this lightbox to suit your décor, creating a cozy and inviting atmosphere. Let the gentle glow of Pikachu light up your space and fill it with the joy and positivity that this iconic character represents. ⚡🌟 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Pikachu sitting Lightbox LED Lamp

lamparas

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

kitcards

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;Dive into the enchanting world of Hyrule with our exclusive FREE 3D printed Link figurine, inspired by L*GO minifigures! Crafted in homage to the classic green tunic costume from the Breath of the Wild game, this collectible stands approximately 9 inches tall and is equipped with a silver sword and classic shield – just like the iconic hero himself.&nbsp;🆓 Download Our L*GO-Inspired Link Figurine Today: For a limited time, we&#39;re thrilled to showcase this incredible piece to the passionate Legend of Zelda community. Bring Link to life in a whole new way, with a L*GO-inspired twist that adds a touch of nostalgia and creativity to your collection.&nbsp;🌈 Customize Your Adventure: Let your imagination run wild! It can be printed in multicolor or singularly, providing endless possibilities for customization. Hold the silver sword and classic shield in hands, or attach them to the back for dynamic posing. Plus, get creative – paint and personalize your hero to match your unique vision.&nbsp;⚔️ More Weapons and Costumes Coming Soon: Stay tuned for exciting updates! We&#39;re not stopping here – more weapons and costumes will be added to expand our L*GO-style Link collection. Elevate your display with additional accessories, and build your very own Hyrule with L*GO-inspired flair!&nbsp;🚀 Easy Printing and Assembly: Every plate is already laid out and pre-colored for you!&nbsp;🎁 Perfect Gift for L*GO Enthusiasts and Gamers: Share the magic of the Legend of Zelda universe with L*GO enthusiasts and gamers alike. Link makes for a unique and unforgettable gift that captures the spirit of the beloved character in a playful L*GO style.

Bricks Classic Link from Legend of Zelda

lego

OrangeSs

Formula F1 2D wall art

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>

StarWars deathstar lithophane lamp

star wars

TheMiguelBi

<h3>Even an indoor office needs a patch of grass to organize the cables! Always in style!</h3>--------------------------------------This is a stylish way to group all the various power cables together, concentrating them in one place. Phone, Power bank, wireless earphones, electronic cigarette. Everything will find a place on this lawn!&nbsp;Only one cable in, many cables out!&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/410246" rel="nofollow noopener">Tiny Poop Minifigures: https://makerworld.com/en/models/410246</a><a target="_blank" href="https://makerworld.com/en/models/413253" rel="nofollow noopener">Fake VGA: https://makerworld.com/en/models/413253</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-04-04_6e0bba1d6c5ec.jpg"></figure>&nbsp;— — Other versions:<ul><li>BIG: 25.5 x 15.7 x 13 cm</li><li>MEDIUM: 17.1 x 10.6 x 10.3 cm</li><li>SMALL: 13 x 8 x 8 cm</li></ul>— — &nbsp;There are three pieces needed,and assembly is very simple:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_60dbcc90422e6.jpg"></figure>&nbsp;--------------------------------------For the <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">magnetic cable holders</a>, here: <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">https://makerworld.com/en/models/159176</a>--------------------------------------&nbsp;Two sizes available, also for A1mini:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_24059c4c65637.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_12e92f818eda6.jpg"></figure>&nbsp;&nbsp;To remove the wall at the end of the print, common scissors can be used (this will involve removing a larger portion of grass). I used the common <a target="_blank" href="https://makerworld.com/en/models/12702" rel="nofollow noopener">BambuLab scraper</a>, placing it on a sturdy surface and paying attention gives a good result. Don&#39;t worry if some tufts are crushed during this operation, then by using the clod of grass everything will become homogeneous over time.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_42126cb9b6668.jpg"></figure>&nbsp;&nbsp;&nbsp; (\(\ ( =’:’) (..(“)(“)Good work! &nbsp;--------------------------------------

Office lawn cable organizer

playmo

Forest87

Line art low poly sculpture of Yoshi (from Super Mario series), with stand!  Decorate your home with your favorite character. Give a touch of personalization to your collection!&nbsp;If you like this model, maybe you might like these too!&nbsp;<figure class="image"><a href="https://makerworld.com/en/models/145248#profileId-157995" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/419507/2024-01-18_791e17838c5d1.png"></a></figure>&nbsp;&nbsp;&nbsp;<figure class="image"><a href="https://makerworld.com/en/models/138567#profileId-150932" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/419507/2024-01-14_42f6fdca61472.png"></a></figure><figure class="image"><a href="https://makerworld.com/it/models/118216#profileId-127099" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/419507/2024-01-09_a4622f10b3811.png"></a></figure>&nbsp;&nbsp;&nbsp;&nbsp;

Low poly Yoshi with stand

nintendo

KeepTheBOX

Stormtrooper First Order helmet wearable&nbsp;Link to the newer and more accurate Model<a href="https://www.printables.com/de/model/39467-stormtooper-tfa-helm" rel="nofollow">https://www.printables.com/de/model/39467-stormtooper-tfa-helm</a>

Stormtrooper First Order helmet

helmets

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_5683da9e2fb0f.jpg"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>This first pack includes the following Pokémon: Charizard, Pikachu, Snorlax, Gengar, and Mewtwo! Check out my other Pokemon Packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-15_69944c783c556.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, take a small drill bit to the hole to add an extra bit of wiggle room.&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-15_a806c1738eb0e.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!&nbsp;<figure class="image image_resized" style="width: 41.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_1602f737e57a5.gif"></figure>&nbsp;If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_6a268482b4d6a.jpg"></figure>This is my first time uploading a model set to Makerworld, so if you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print their very best! Like this pack? Check out my Super Mario 3, Undertale, and Pokemon Keychain Packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #1 - Pikachu, Charizard

pokemon

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like this model:<a target="_blank" href="https://makerworld.com/en/models/135018" rel="nofollow noopener">https://makerworld.com/en/models/135018</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a target="_blank" href="https://www.buymeacoffee.com/vitim" rel="nofollow noopener">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

3d tools

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

THINGS TO DO

Aruba3D

Simple plate holder for bambulab A1, P and X series sheets, with 3 variants:<ul><li>Color logo</li><li>Deep logo</li><li>No logo</li></ul>Can hold 5 sheets.