These are a very specific print made to allow a bare ethernet cable to be installed water tight into the Unfi Camera Compact Junction Box when conduit is not being used. This may work with other types of junctions boxes but it was made for the Unifi Compact one.

Cable Raceway Accessories. Very proud of this one. Very useful print for anyone that runs cables or wants to keep things organized.

I mount many devices to walls for my day job. Most of them only have the keyhole slots which can be a pain to get just right. I made these quick and dirty little helpers that clip into the holes allowing you to place the device on the wall and with a little pressout mark were you need to place the screws. Also felt ambitious and made an insure that fit into this case for them as well.

Just a simple divider that is made to fit loosely into a bambu spool refill box.

I added larger holes so it's quicker to print but still sturdy. More importantly I added a groove around the top of each side to easily store the filament when not in use. AMS friendly.

Small plastic piece that goes at the top of a bifold door to keep it in the track. Couldn't find a replacement for the one type I needed so I made one and it worked great.