ruxi

Cute tiger bookmark.40x135mm, 3.2mm thick.Can be printed without an AMS.&nbsp;Other safari bookmarks are available <a target="_blank" href="https://makerworld.com/en/@aztairya/collections/1547309" rel="nofollow noopener">here</a>&nbsp;No AMS printing instructions:Start with OrangePink at layer #11 (2.2mm)White at layer #13 (2.6mm)Black at layer #15 (3.0mm)

Cute Tiger Bookmark

hueforge

Ukdavewood

Update 16/5/24 - Added short instruction video&nbsp;Update 15/1 - Added circular threaded leg and rounded corner and edges option - see seperate print profile.<figure class="image image_resized" style="width: 47.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-15_395de0893b5748.jpg"></figure>&nbsp;&nbsp;Extendable Multi Part Real Table Model - that was primarily designed as something useful to create instead of Flushing purge waste spirals when doing multi colour prints on a Bambu Lab or other multi colour printer.&nbsp;The original idea for creating useful things out of flush/purge waste was inspired by the 3d Printing Professor youtube channel.&nbsp;The sizes of the parts are similar to Ikea Lack table thicknesses - i.e. 50mm&nbsp;This is a major print project with a minimum of around 40 major parts about 60 smaller joiner parts - which if printed single colour (or efficient multi colour) would take around 2d14h printing time and 2.25kg of filament for the basic size table.&nbsp;Also useful as something to use up odd short lengths of filament or old brittle rolls of filament.&nbsp;There are a basic minimum number of parts needed to produce a small table appx 40cm Long x 30cm wide and 30cm high.&nbsp;But then as more parts are printed the table size can be expanded in all three dimensions - by simply slotting in more parts.&nbsp;Parts are joined firmly together with Springy dovetail joiners (inpired from the Slant3d channel). The joints are pretty tight - so a small hammer is recommended to push them in.&nbsp;The joining method may be refined in the future and extra parts will be added to allow greater strength when the table gets larger.&nbsp;Also other designs - such as shelves and enclosures will be made available.&nbsp;The primary recommended way to print the parts is by adding the individual STLs to other multi colour 3d model plates - with flush-into selected. This will only work if a small prime-tower is left on.&nbsp;Many of the parts can either be scaled or sliced on the Z axis to make them the correct height to match the colour changes of the donor multi coloured 3d model being printed. Often with careful selection and scaling of parts it is possible to get flush waste down from 100s of grammes to less than 1g.&nbsp;It is technically possible for the selection of parts and scaling process to be automated at some point in the future.&nbsp;For any parts printed seperately out of waste filament it is recommended that the colour is changed either in the slicer, or via cutting the filament and changing coloured regularly in the AMS as it prints. Most of the example model parts were produced this way.&nbsp;An assembly instruction video will be made available at some point. -&nbsp;Historical background info and tracking of ongoing developments available here <a target="_blank" href="https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood" rel="nofollow noopener">https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood</a>&nbsp;NB/ Only one test print done so far as doing lots of reprints kind of goes against the ethos of this filament waste reduction model.&nbsp;For the ‘sliceable’ objects - to reduce their height in BS simply cut on Z axis below any horizontal features (but leaving enough of the part for joiners to still fit in).&nbsp;To increase the height - again use cut in BS - below the horizontal features (at 20mm for example), specify ‘cut to parts’ - then in the object browser locate the bottom part and scale it up on the Z this should also lift up the top half.&nbsp;&nbsp;<figure class="image image_resized" style="width: 59.96%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_56bb34c4d349b8.jpeg"></figure>&nbsp;Scalable objects do not have any special horizonal features - so can simply be scaled up or down on the Z axis only.<figure class="image image_resized" style="width: 60.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_636dc20582b72.jpeg"></figure>&nbsp;<figure class="image image_resized" style="width: 62.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_eb44cd7516818.jpeg"></figure>&nbsp;&nbsp;For illustration purposes - if all of the parts with cloned in the correct proportions for a minimum size table and the table was printed directly, rather than as flush-into object then it could be printed in 3 build plates as per the below - 3mf file not uploaded due to requirement for print profiles to have passed print tests. Total print time around 2d14h and filament about 2.25kg.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_083fef5cc87d3.png"></figure>&nbsp;Basic steps I usually take to minimise flush volumes.&nbsp;To reduce purge waste the basic steps I take are: 1. Model orientation/numbers/sliceup - if possible orient the model in such as way as to minimise the number of colour changes per layer, also consider doing multiple copies of the same or similar models together to reduce waste per model.Finally in some case you can save a lot of waste with some simple slicing up of the model into smaller parts that print more efficiently and can then be joined back together after printing. 2. Optimise flushing volumes - using the button in BS above the filaments. Personally I usually set the Multiplier to 0.5 or 0.6 and press re-calculate 3. Reduce the size of the prime tower - Under Process - press Global, then in the &#39;Others&#39; tab - on my setup I current set Prime Tower width and volume to 10mm 4. Now preview the slicing to see how Flushed Waste you will be getting compared to the Model. 5. Now if there is space on the build place as a few Colour-doesn&#39;t-matter objects onto the build plate - such as component parts of this Purge Waste Table. Look at where in the multi colour model the colour changes occur - and if possible change the heights of the Purge Table parts to match the same layers (as the top surfaces are better at absorbing purge than the middles).  6. Right click on the added objects and select Flush Options, Flush into this object. 6. Re-Preview to see if the Flush volume has gone down - I tend to target getting the volume down to less than 1g 7. Keep cloning or adding more objects repeating the above steps until you have reduced the Flush volume down to acceptable levels. I appreciate that adding the flush-into objects is out of the box a fairly manual process - and I am working on some scripts to automatically select the best objects and the best heights for each print and also optionally to remove the prime tower from the GCode.&nbsp;I am hopeful that at some point BL will add this sort of functionality into Makerworld or Bambu Studio.&nbsp;updated June 24 - added 4 extra channels to table to increase size by 80% using mostly waste purge.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_8af12b1fe8591.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_a63a066e60d938.jpeg"></figure>

Purge Waste Table V1

tuning

jetpad

The EZ-Z Luber is an EaZy way to lubricate the Z-axis screw of your printer. This handy tool screws onto the end of a Super Lube tube, allowing for precise and clean application without getting grease on your hands.&nbsp;To use, simply replace the cap on the Super Lube tube with the EZ-Z Luber. Straddle the sides of each Z-axis screw with the applicator and turn it clockwise. The EZ-Z Luber hugs the screw, and when you squeeze the tube, lubricant is applied directly to all sides of the screw simultaneously. Move it up and down along the screw to cover the entire length. You’ll be finished in no time.&nbsp;There are two versions of the EZ-Z Luber. One version includes feet, allowing it to stand up on its own when not being used. The other version is footless and designed to fit better in tight spaces like on the A1&#39;s lead screws. &nbsp;Happy Printing!&nbsp;Also available is a <a target="_blank" href="https://makerworld.com/en/models/503962#profileId-419504" rel="nofollow noopener">dust and dirt cap</a> that fits the EZ-Z Luber.&nbsp;Custom Filaments  <a target="_blank" href="https://makerworld.com/en/models/438259" rel="nofollow noopener">Tricolor</a>    <a target="_blank" href="https://makerworld.com/en/models/446943" rel="nofollow noopener">Quad-Color</a>    <a target="_blank" href="https://makerworld.com/en/models/460079" rel="nofollow noopener">Custom Colors</a>    <a target="_blank" href="https://makerworld.com/en/models/477652" rel="nofollow noopener">Stratified</a>

EZ-Z Luber - The EaZy way to lubricate the Z-axis

bambu

Shaztech.info

12 Trays HDD Box for NAS/Server3U height, rack mountableDOESN&#39;T CONTAINS ANY MOTHERBOARD/COMPUTERFully printed enclosureUsing long SATA/SAS cables, so no complicated electronicsAll parts are easily available on Amazon/Aliexpress/EbayTrays are available for 3.5 and 2.5in HDD/SSD&nbsp;Bill of Materials:63x - Torx Screws #4 x 1/2&#34; - McMaster #99512A219 12x - Socked Head Screws M3 x 22mm - McMaster #91290A124 2x - Computer Fan 120mm (with 4 screws) 2x - 6 SATA 1 Meter Cable (or SAS if you have a card) (see pictures) 12x - SATA Adapters Male to Female Straight (see pictures) 1x - Mini ITX / Flex ATX Computer Power Supply 1x - Power switch (Réf: <a target="_blank" href="https://www.amazon.com/gp/product/B08ZMYNP3Z)" rel="nofollow noopener">https://www.amazon.com/gp/product/B08ZMYNP3Z)</a>&nbsp;If you want smaller check my 2, 4 or 8 Trays box.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/shaztech_info" rel="nofollow noopener">Buy me a coffee</a>

12 Trays HDD Enclosure, 3U Rack Mountable

servers

Whopper Printing

Introducing my most complex model yet—the Print-in-Place Scissor Lift! This model is expertly designed to print entirely without support or assembly, showcasing the latest advancements in 3D printing.Features:<ul><li>Threaded Screw Mechanism: Effortlessly raises and lowers the lift,</li><li>Functional Wheels: The wheels work, enabling the model to roll smoothly,</li><li>Easy Snap Base: Simply rotate the base as indicated by the arrow on the bottom, align it with the top piece, and snap it into place to complete the setup.</li></ul>IMPORTANT: Gently free up the joints before using the screw by gently pushing down on the top and then lightly pulling.<a target="_blank" href="https://www.instagram.com/whopperprinting/reel/C7J_oilLv2e/" rel="nofollow noopener">Video Example</a>&nbsp;Support Me:<ul><li>If you enjoy this model, please explore <a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">more innovative designs on my website</a> or <a target="_blank" href="https://www.patreon.com/whopperprinting" rel="nofollow noopener">consider supporting my work on Patreon</a>. Your support helps fuel further creativity! These models are difficult and time consuming to create, so any help is greatly appreciated!</li><li>Follow me on social media @whopperprinting for updates and more.</li><li>I&#39;d love to see your prints! Share your photos; it’s always exciting to see my designs come to life in your hands.</li></ul>Thank you for your support and happy printing!

Print-in-Place Scissor Lift (No Support Needed!)

print-in-place

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

garden

Mici

<blockquote>11. May 2024 V1.0:<ul><li>First release</li></ul></blockquote>Difference to the original:<ul><li>Used the elbow joint for a new concept</li></ul>&nbsp;As I had to design a new knee joint for my &#34;<a target="_blank" href="https://makerworld.com/en/models/460814" rel="nofollow noopener">Princess Leia</a>&#34; model, I used the same concept for the elbow so that it would also behave anatomically correctly.<ul><li>Please note the alignment as shown in the picture.</li><li>Replace the original joint with this part, that&#39;s all.</li><li>Simple, quick and dirty, but it just works :)</li><li>Use PETG</li></ul> Have fun with it.

DUMMY 13 - Anatomical elbow joint (BETA)

dummy13

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.