rtkaczmarczyk2020

3Dacores

Introducing the Stitch Character Lightbox – a delightful and whimsical addition to your living space!This enchanting lightbox features the lovable Stitch character, known for his mischievous yet endearing antics.&nbsp;The vibrant colors and intricate design of Stitch come to life when the lightbox is turned on, creating a playful and inviting atmosphere in any room.&nbsp;Whether you&#39;re a fan of Disney&#39;s Lilo &amp; Stitch or simply adore quirky and charming decor, this lightbox is sure to capture your heart.Its compact size makes it versatile, fitting seamlessly on shelves, desks, or bedside tables.&nbsp;The soft glow emitted by the LED lights adds a touch of warmth to your surroundings, making it an ideal companion for cozy nights or creative moments.&nbsp;Bring a touch of magic into your home with the Stitch Character Lightbox – a unique and captivating accent that will surely spark joy and nostalgia. Embrace the enchantment and let Stitch brighten up your space in the most delightful way possible!&nbsp;<blockquote>Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship. All trademarks, logos and characters are the property of their respective owners. Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders. I respect the intellectual property of all brands and/or charactes mentioned in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.</blockquote>

Stitch Lightbox | LED Lamp | AMS only 4 colors 

disney

CH682

Paperclips with Animals and Numberssingle colourdouble colourPLA and PETG profile added

Paperclip Animals Numbers

Functional

Williams Industries

Fun throwback to some awesome 8-Bit times! For personal use, commercial use in the Patreon below. For the art, I just used <a target="_blank" href="https://amzn.to/3TBdswu" rel="nofollow noopener">THESE</a> holographic sticker sheets (affiliate link) holographic sticker sheets.&nbsp;Check out the large version (click gif)<a target="_blank" href="https://makerworld.com/en/models/252349#profileId-268719" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/699040/2024-03-13_857a9c80145a88.gif"></a>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/699040/2024-03-13_967b85ee2294b8.png"></a></figure>

NES Cartridge

Game stuff

3DVJModels

<h3>Model Overview</h3>**This Design Offers Infill Patterns as an Accent Piece!&nbsp;This model is composed of a modern square succulent pot in which rest on a concealed water drip tray. Surrounding these parts is a thin only 1.8mm thick accent frame in which has multiple designs so you can customize your pot the way you like it.&nbsp;Overall, I created this design to be printed with a 0.4mm nozzle. This planter sits 2&#34; tall (~50mm) and 2.75&#34; wide (~70mm).&nbsp;&nbsp;Assembly&nbsp;Each frame section has a dovetail joint on each side, please pay attention to these when choosing a frame designs you want next to each other. These attach via superglue as they are thin parts that are intended to be supported by the drip tray at the bottom.&nbsp;If using for live plants that need drainage, be sure to seal the drip tray at the bottom to ensure there are no leaks.&nbsp;Once the frame is assembled, simply slide it over the pot with the drip tray underneath.&nbsp;&nbsp;Customization&nbsp;There are a handful of options when it comes to color customization of this model. Simply paint the model to your liking and use any of the provided frame designs based on your design approach. I would love to see what you come up with so please share your color/frame choices with me and others to give us ideas!&nbsp;My main photo shows a printed model using Black and White Bambu PLA Matte for the pot and drip tray and Dark Brown Bambu PLA Matte for all frame pieces.&nbsp;If you like this model, please consider taking a look at my other models available here on MakerWorld and Printables.<a target="_blank" href="https://www.printables.com/@3DVJModels" rel="nofollow noopener">https://www.printables.com/@3DVJModels</a>&nbsp;Hope you enjoy and happy printing!

Modern Planter with Built-in Tray - Customizable

Planters

Techro3D

Classic bird feeder house with mounting bracket | By Techro3D&nbsp;<ul><li>Water drainage.</li><li>Mounting bracket.</li><li>Suspension point for a fatball or other bird food.</li><li>Bottom also suitable for placing food.</li><li>Removable roof.</li><li>100% printable.</li><li>No glue required, but can be used just to be sure.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432048/design/2024-04-17_adf446c871677.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432048/design/2024-04-17_091322049d81b.png">

Classic bird feeder house with mounting bracket.

Bird Stuff

3DPrintingLabs13

Turtle stained glass.AMS required.I used a mixture of normal PLA, transparent PLA, and transparent PETGI did a variation of both black and silver on the frame, you can choose which one you like better. &nbsp;Silver is normal PLA from GeeTechBlack is normal PLA from overtureBrown is normal PLA from R3DGreen is transparent PLA from IEMAIBlue is a gradient blue and white transparent PETG from StrongHero&nbsp;Please let me know if you have any feedback!&nbsp;Happy Printing :)

Turtle "Stained Glass"

Stained Glass

Kugelmann

Meet this articulated and cute monkey which is one of the rare species who lives deep deep in the 3d printingforrest along with the other cute animals i made :)&nbsp;You may consider downloading the other profiles if you want another version of it, but i also includeda single color profile if you just want a quick print, or if you prefer a 75% or 100% version of each coloryou can pick them as well.&nbsp;The included printing profiles have been fully tested, but remember to clean you bed and use someproper glue before you start printing.&nbsp;You can customize the colors or resize is as you like, but it would bring you in another directionthan the profile i included here and tested before releasing it.&nbsp;if you want to sell this item, then please buy it and the rights to do it here: <a target="_blank" href="https://cults3d.com/en/creations/articulated-and-flexible-cute-monkey" rel="nofollow noopener">https://cults3d.com/en/creations/articulated-and-flexible-cute-monkey</a>&nbsp;please check my profile for what else I've made for this grateful maker world community.<a target="_blank" href="https://makerworld.com/en/u/1549602616" rel="nofollow noopener">https://makerworld.com/en/u/1549602616</a>&nbsp;i hope you like him as much as me and my grandchild do :)&nbsp;Stay tuned at my profile for new ideas and releases :)&nbsp;happy printing !

Articulated And Flexible Cute Monkey

flexi

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Gray At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #19 (1.6mm) swap to Mandarin Orange At layer #22 (1.84mm) swap to Jade White for the rest.

Harry Potter Hogwarts Castle - HueForge

Harry Potter

TriDimension Printworks

I had several requests to make this design, give this to your significant other as a playful gesture or just for fun. the keychains fit together perfectly. I have included the STL files as well. &nbsp;the dual color can be achieved with or wtihout an AMS you will just need to perform a color change at layer 16 on .2 layer height.make sure you turn on detect thin walls if you are not printing from my profile. it may not detect the letters

Forever hold the key to my heart 2 part keychain- Valentines day gift

Nsfw

gaugo87

Lithophane generated with my github project : <a target="_blank" href="https://github.com/gaugo87/PIXEstL" rel="nofollow noopener">https://github.com/gaugo87/PIXEstL</a>&nbsp;For the stand:Magnets: <a target="_blank" href="https://www.amazon.fr/dp/B08F7DKGQR" rel="nofollow noopener">https://www.amazon.fr/dp/B08F7DKGQR</a> LED System: <a target="_blank" href="https://www.amazon.fr/dp/B08VNL961G" rel="nofollow noopener">https://www.amazon.fr/dp/B08VNL961G</a>&nbsp;

Lithophane Star Wars Soldier

star wars

BrandedAbstract3D

<h3>Model</h3>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you'll need:<ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.&nbsp;<ul><li>Caliper: Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li>Brake Disc: Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li>Display Screws: Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li>Brembo Vanity Plate: There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.&nbsp;Happy Printing!

Brembo Drinks Coaster Set

Car Stuff

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

Tools

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

Pokemon

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;

Turtle shell container

Mario

JamesThePrinter

Articulated monarch butterfly&nbsp;Approximately 140x103x8mm.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Articulated Monarch Butterfly

Animals Insects

mail.iou

2023/11/05 update 150x150mm, Suitable for this 150x150mm frame：<a target="_blank" href="https://makerworld.com/en/models/57319" rel="nofollow noopener">https://makerworld.com/en/models/57319</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #12 (1.04mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White for the rest.

Starry Night, Dog - AI Creation (HueForge)

Hueforge

NUKDDD

Please consider <a target="_blank" href="https://www.buymeacoffee.com/nukddd" rel="nofollow noopener">buying me a coffee</a> (filaments) to help me release more free designs.&nbsp;This is ghost got spooked! &nbsp;It's 3D and wall thickness @ 2mm.&nbsp;Perfect companion piece for your scary decors. Print 1 this Halloween for a little giggle =]

Spooked Ghost

Halloween

Bambu Lab

This seasonal model has 113 parts, and by default prints in 6 colors that lay down on 9 separate plates. Once upon a time, a project of such scale demanded a certain amount of courage to start preparing and slicing, let alone print it. Now, with Bambu Lab's hardware and software, you can finish the print within two days and customize the colors to your liking. You can even customize the text and the logo!&nbsp;In the Assembly view mode, you can simply choose a part and press the number of the filament to color that part. We left blank plate in the model so you can type in your own text.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=88gXxk9oWPg&t=29s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/88gXxk9oWPg?start=29" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Bambu Christmas Cabin

Christmas

toolmantim313

Simple rack to hold up to 10 build plates. Screws together with 3mmx14mm socket head cap screws. I included both 3mf and stl files with a multi color stand 3mf file, but it's not really necessary as it stands on it's own. Although since the stand does bolt onto the rack, you can use it to mount to the underside of a bench or shelf in the vertical position. I opted to use 3m tape and attached it to the side of the X1.&nbsp;And check out my Hex system adapter mounts so you can mount the rack to a hex wall!&nbsp;https://makerworld.com/en/models/28603#profileId-24991