Rozim3D

Madtrap

<h2>$lamp Lamp w. touch function</h2>This is a project I had in mind for a while I wanted for my office like a zen garden sort of thing.The design is meant to be soft on the eyes with different light options. It is designed to be easy to print and assemble, with no screws or glue required. The only bit you can't get around is a bit of soldering. I wrote up a guide to make this possible for every one to make with no special skills required.The free version comes with 1 color scheme, If you are interested in the commercial license or just want to show support for our work, the 10 color scheme model, <a target="_blank" href="https://cults3d.com/en/3d-model/art/lamp-commercial-license" rel="nofollow noopener">buy it here</a>Happy Printing!&nbsp;<h3>Parts:</h3><ul><li><a target="_blank" href="https://www.aliexpress.com/item/1005006140029961.html" rel="nofollow noopener">Arduino Nano</a></li><li><a target="_blank" href="https://www.aliexpress.com/item/4000558561521.html" rel="nofollow noopener">TTP223 touch sensor</a></li><li>USB cable</li><li>64 x <a target="_blank" href="https://www.aliexpress.com/item/1005005990604541.html" rel="nofollow noopener">Acrylic lollipop sticks (15cm/6")</a></li><li><a target="_blank" href="https://www.aliexpress.com/item/1005006127587095.html" rel="nofollow noopener">8x8 WS2812 LED matrix</a></li></ul><h3>Tools:</h3><ul><li>Soldering Iron.</li><li>Drill (3mm/0.12" sorry European :P)</li><li>Computer to upload code to arduino.</li><li><a target="_blank" href="https://www.microsoft.com/store/productId/9NBLGGH4RSD8" rel="nofollow noopener">Arduino IDE software</a> (can be found in Windows store)</li></ul><h3>3d printed parts:</h3><ul><li>Frame_body</li><li>Bottom_body</li><li>LED_body</li><li>Clamp_body</li><li>S Frame</li></ul><h3>Assembly:</h3><h4>Soldering</h4><figure class="image image_resized image-style-side" style="width:21.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/519043/2024-01-24_db70a5c32a08b.png"></figure>Solder a wire going from 5v on the arduino to the 5v on the LED matrix and VCC on the touch sensor.IMPORTANT! Double check you are using the DIN direction of the Matrix.Then add a wire going from GND on Arduino to GND on both LED and Touch sensor.Last you need to add the digital signals.One going from DIN on LED to PIN D2 on the arduino and another going from the I/O pin on the touch sensor to PIN D3 on the arduino.And that's it!&nbsp;Picture shows where wires go.<h4> </h4><h4> </h4><h4>Lamp Frame</h4>The S Frame will need some drilling to make sure the rods go in perfectly.After that is done, start inserting the rods into the S frame from the bottom of the frame.Align the rods in the bottom so you have around 3-4 mm poking out from the S frame.Then you can attach the LED_body to the bottom of the S frame.Use a table or any solid plane surface and put the S frame upside down so the acrylic rods are resting on the surface.Do the last adjustments to the acrylic rods so they are aligned with the bottom of the S frame and then press on the LED_body using the surface.Now you should have the S frame ready to attach to the frame_body of the lamp.&nbsp;Add the Arduino to the Bottom_body and attach the Clamp_body and use double sticking tape to attach the touch sensor to the front of the frame.Then put the matrix on top of the Bottom_body.<figure class="image image_resized" style="width:17.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/519043/2024-01-24_5c1ec578576498.jpg"></figure><figure class="image image_resized" style="width:17.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/519043/2024-01-24_95c01a1ca76e58.jpg"></figure>&nbsp;Insert Bottom_body from underneath into the Frame_body.Take the base of the lamp and attach it to the top, make sure you have the base aligned since is function as support for the LEDs.&nbsp;<h4>Programming</h4>Attach the arduino to your computer using a USB and load up the arduino IDE. Go to tools > port and find the right com port your arduino is connected to (usual it's the first you see) and select it.Copy and paste the code from underneath into the program and save it.Press upload.After code is uploaded the LEDs should start flickering. Touch button should turn off LEDs.&nbsp;<blockquote>// Code written by Madtrap using fastled lib// It is written to fit the Slamp Lamp project// contact: https://makerworld.com/en/u/150513043#include <FastLED.h>&nbsp;FASTLED_USING_NAMESPACE&nbsp;#define BUTTON_PIN 3#define DATA_PIN 2//#define CLK_PIN 4#define LED_TYPE WS2812B#define COLOR_ORDER GRB#define NUM_LEDS 64CRGB leds[NUM_LEDS];&nbsp;#define BRIGHTNESS 96#define FRAMES_PER_SECOND 120&nbsp;void setup() {pinMode(BUTTON_PIN, INPUT);delay(3000); // 3 second delay for recovery&nbsp;// tell FastLED about the LED strip configurationFastLED.addLeds<LED_TYPE,DATA_PIN,COLOR_ORDER>(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);//FastLED.addLeds(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);&nbsp;// set master brightness controlFastLED.setBrightness(BRIGHTNESS);}&nbsp;// List of patterns to cycle through. Each is defined as a separate function below.typedef void (*SimplePatternList[])();SimplePatternList gPatterns = { confetti, off};&nbsp;uint8_t gCurrentPatternNumber = 0; // Index number of which pattern is currentuint8_t gHue = 0; // rotating "base color" used by many of the patterns&nbsp;void loop(){// Call the current pattern function once, updating the 'leds' arraygPatterns[gCurrentPatternNumber]();&nbsp;// send the 'leds' array out to the actual LED stripFastLED.show();// insert a delay to keep the framerate modestFastLED.delay(1000/FRAMES_PER_SECOND);&nbsp;// do some periodic updatesEVERY_N_MILLISECONDS( 20 ) { gHue++; } // slowly cycle the "base color" through the rainbow//EVERY_N_SECONDS( 10 ) { nextPattern(); } // change patterns periodically&nbsp;int buttonState;buttonState = digitalRead(3);if (buttonState == HIGH){nextPattern();delay(500);}&nbsp;}&nbsp;#define ARRAY_SIZE(A) (sizeof(A) / sizeof((A)[0]))&nbsp;void nextPattern(){{// add one to the current pattern number, and wrap around at the endgCurrentPatternNumber = (gCurrentPatternNumber + 1) % ARRAY_SIZE( gPatterns);}}void confetti(){// random colored speckles that blink in and fade smoothlyfadeToBlackBy( leds, NUM_LEDS, 10);int pos = random16(NUM_LEDS);leds[pos] += CHSV( gHue + random8(64), 200, 255);}&nbsp;void off(){fill_solid( leds, NUM_LEDS, CRGB( 0, 0, 0));}</blockquote>Me and my brother spend time on this for our own enjoyment and just want to share our work with the community.If you like any of our models we would appreciate a comment or upvote on the model you like. Also, always feel free to contact us if you have any suggestions for new or current models. If you want to buy us a coffee use our <a target="_blank" href="https://paypal.me/madtrap" rel="nofollow noopener">Paypal</a>

$lamp Lamp

Arduino

Clyde Frog

This sleek and sturdy trash bin is the perfect solution for keeping your vehicle clutter-free while on the go.&nbsp;It&#39;s compact size ensures it doesn&#39;t take up unnecessary space, yet it&#39;s spacious enough to hold all your wrappers, receipts, and small waste, ensuring your car remains tidy and organized. The bin features a detachable clip mechanism that slides into a channel on the back, allowing for easy installation on the inside of your car door. The bin is also easy to clean, with a removable top for disposal of waste. It is made for hanging on the side of a car door but it can also be used elsewhere due to the detachable clip. Small clip: 13mm Big clip: 18mm Edited 09-04-2024: Added larger sized clip.

Car Trash Bin

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA Eryone Black Transmission Distance: 0.3 PLA Eryone Blue Transmission Distance: 5 PLA Eryone White Transmission Distance: 6&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #14 (1.2mm) swap to White for the rest.

Harry Potter HueForge

Painting

3DSlash

Introducing our delightful 3D Easter Bunny Tea Light Stand – a festive touch for your home decor. &nbsp;This charming stand, adorned with an Easter bunny motif, adds a playful spirit to your space. As you place a tea light within, watch as the bunny's silhouette projects a warm Easter glow onto the wall, creating a cozy atmosphere. Embrace the spirit of the season with this charming and festive design. Make your Easter celebrations even more special with our Bunny Tea Light Stand – where simplicity meets the joy of the holiday.&nbsp;Only use with LED tealight.&nbsp;I would be happy to see your results in the comments

Easter LED tea-light Stand

Easter

3djacobb

<h2>Daredevil Helmet V2 </h2>&nbsp;the eyes were separated so that they could be printed in a different color.The helmet may not fit so make sure it fits your head.Have a nice and easy printing :)

Daredevil Helmet V2

Helmet

Kocyns

<h3>UPDATE:</h3><ul><li>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a></li><li>New model: <a target="_blank" href="https://makerworld.com/en/models/376939#profileId-276893" rel="nofollow noopener">DeLorean DMC-12</a></li></ul><figure class="image image_resized" style="width: 58.79%"><a href="https://makerworld.com/en/models/376939#profileId-281288" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-27_a41aa99062719.png"></a></figure>&nbsp;<ul><li>Added multi color version for AMS: AMS - 4 colors - FRAME or (AMS - 4 colors - NO FRAME)</li></ul><figure class="image image_resized" style="width: 60.36%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-08_171076b91749a.jpg"></figure><h3>ASSEMBLY:</h3>The assembly itself is more demanding, so please be patient during the process. Thank you!&nbsp;Quick assembly tip: Start from the front of the vehicle along with both side parts, then move over the hood to the roof. Then begin assembling the internal parts followed by the trunk. Mount the pre-assembled chassis with wheels last. Bumpers and spoiler go on at the very end.&nbsp;<h4>Video:</h4><figure class="media"></figure><figure class="image image_resized" style="width: 80.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_6a7929db2a272.png"></figure><figure class="image image_resized" style="width: 63.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_eada19129df21.png"></figure><h4>1) Sides and front</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_b8c462015b82b.png"></figure><h4>2) Hood and roof</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_2b1f6be2a6a21.png"></figure><h4>3) Interior parts 1/3</h4><figure class="image image_resized" style="width: 57.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_91d61eb454038.png"></figure><h4>4) Interior parts 2/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_bf666331b1267.png"></figure><h4>5) Interior parts 3/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_a8c15ef4c451d.png"></figure><h4>6) Chassis and wheels</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_9b011d38aa839.png"></figure><h4>7) Assembly</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_772225c948dfc.png"></figure><h4>8) Bumpers</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_70518fc3c497b.png"></figure>&nbsp;<h4> </h4><h4>Wheel (version R1 only):</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_35304525e8cc.png"></figure><figure class="image image_resized" style="width: 61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_9e476fad10ef9.webp"></figure>&nbsp;…More Information will be added!

Golf MK1 - Kit Card

Toys

BamBam Design

What it is:A compatible 8x4 tile for LEGO® and other bricks and building blocks manufacture.You could design youre own tile surface with Make My Sign!It is possible to create beautiful labels for your brick builds or add special tiles to your building block constructions.Check out 4x4 tile <a target="_blank" href="https://makerworld.com/models/77889" rel="nofollow noopener">models/77889</a> and 16x8 tile <a target="_blank" href="https://makerworld.com/models/78437" rel="nofollow noopener">/models/78437</a> as well:More tile sizes will come in future…subscribe! 👍..Optimized for 3D print:<ul><li>Optimized clearance for Bambu PLA printed with X1 Carbon.</li><li>Added small bridges to the stud holes to minimize retractions.</li><li>Reduced the surface to colorize</li><li>Print in Arachne Mode! Otherwise studs to loose!</li></ul>..Detailed Worktrough:&nbsp;1.Design your Brick Tile Surface with <a target="_blank" href="https://makerworld.com/makerlab/MakeMySign" rel="nofollow noopener">https://makerworld.com/makerlab/MakeMySign</a> and download as "stl" format.Choose dimensions as shown:<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_b54c47363240a.png"><img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-29_ab0aab301edbf.png">&nbsp;3. Open the it in Bambu Studio and rotate Y: 180°<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_94367b621f226.png">&nbsp;4. Download and add “Tile 8x4 Sign - Blank.3mf” file to the build plate in Bambu Studio and move it exactly over you're designed Tile Surface. You can use Center function as well!<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_4d0ba33d938e7.png">&nbsp;6. Merge the 2 parts with assemble function in Bambu Studio<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_f2aa6d887bdbc.png">&nbsp;7. Paint the bottom as you like.<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_0624597059466.png">8. Slice and Happy Printing 😎👍&nbsp;Tips:<ul><li>Print in Arachne Mode! Otherwise studs to loose!</li><li>You can try to reduce First Layer line width for more details.</li><li>Check the first layer…sometimes Color do not appear. In this case Play with the heights in Make My Sign, try download 3mf and Color manually!</li><li>PRO Tip: Bambu Studio can handle SVG directly, in some case it works better, try it!</li></ul>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-29_5c5fd784b3444.png"><img src="https://makerworld.bblmw.com/makerworld/draft/220314/2023-11-28_5b37a9947d821.png">&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(<a target="_blank" href="https://makerworld.com/de/makerlab/makeMySign" rel="nofollow noopener">makerworld.com/makerlab/MakeMySign</a>)&nbsp;

Tile 8x4 - Make own LEGO Bricks

Lego

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

Flexi

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Baby Groot has again entered the gaming realm, protecting your headset ! Remember to check out my other headset stands. OBS Make sure to check your PURGE settings , and always make sure your filament is calibrated!!

Baby Groot Headset stand

Headset stand

YUME PROJECTS

You can find the other hexagons on my profile! New hive type for the Honeycomb System Display! It's a standard hexagon without any type of shelf/support, you can you it for your compositions!

Honeycomb System, standard hive hexagon

Shelf

thelightspd

One of the biggest issues witht the Bambu AMS Lite is the footprint it takes. I wanted to have it on the wall when I wanted it on the wall and to be able to quickly take it to the desk when needed. I wanted to do this without any screws or hardware and thats exactly what we got here. &nbsp;Print the Wall Cleat (french cleat); Attach to the wall with 3" sheet rock screws into a stud. There are two. Once this is done no other tools are needed. Replace the stand on the AMS with the AMS attachment and use all 8 screws. Once attached you no longer need tools. You simply slide it over the wall cleat… and make sure it snaps tightly into place. Light tapping on the ams may be needed to get it to seat. This is by design. If you want to print the desk stand in one piece, you need something like a Voron 300mm or bigger to print it in one go. If you don't have a printer that big I made a version for a Bambu size printer. For that version you print the feet as one, the spine, and the bolt. Yes you need to use supports like tree supports. Once printed assembly and tighten by using the bolt. If you can glue it up. It's better in the long run. &nbsp;I made the desk stand so it can be easily used or not with a push and a click. Enjoy.

The Ultimate Modular AMS Lite Mounting System

Rober7Crow

I got the idea when I was making a headphone stand and a game board. I wanted to make a kind of whole, so that I could put everything together after playing. I played around with the designs a bit and came up with a stylish headphone and gamepad holder.  The PS 5 dualsense gamepad fits perfectly.  I printed with a Bambulab X1C + AMS for the multi-colour combination. Since my son liked it, I made him a V2 version in a different colour combination.  I hope you like the product and find it useful.&nbsp;Update: Corrected top Z distance to 0.2 because it is too hard to remove support &nbsp;REMOVE THE SUPPORT GENTLY, USING PLIERS. &nbsp;3D PRINTING SETTINGS layer height 0.2 mm wall loops 3 15% Gyroid fill Hybrid support tree on the build plate only&nbsp;My new addition to the collection is a game stand  <a target="_blank" href="https://makerworld.com/en/u/2142032364" rel="nofollow noopener">Rober7Crow | Published - MakerWorld</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/168868#profileId-185466" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/512845/2024-02-03_4a4841357f6fe.png"></a>

PS5 Headphone and control stand

Videogames

ME STUDIO

<h3>🌹🌹🌹 Introducing the 3D Printed Valentine Rose with Stem: "I Love You"! 🌹🌹🌹</h3>Express your love in a unique and heartfelt way with our enchanting 3D printed Valentine Rose. This one-of-a-kind gift combines the beauty of a rose with a personalized touch. Let's delve into the features of this romantic creation.&nbsp;&nbsp;***&nbsp;Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.If you want to sell my prints commercially and legally, you can join my Patreon:<a target="_blank" href="https://www.patreon.com/MESTUDIO" rel="nofollow noopener">https://www.patreon.com/MESTUDIO</a>&nbsp;The digital files (STL and other formats) may never be resold, shared, remixed or given away. Happy printing!&nbsp;***&nbsp;&nbsp;&nbsp;LOVE THIS DESIGN?&nbsp;You might also like my others:&nbsp;<h4>🎉 Adult Version: <a target="_blank" href="https://makerworld.com/en/models/90795#profileId-97152" rel="nofollow noopener">Link</a></h4><h4>🎉 Kids Version: <a target="_blank" href="https://makerworld.com/en/models/99723#profileId-106322" rel="nofollow noopener">Link</a></h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514459/2024-01-06_2cd213434cbfe.jpg"></figure>2024 Happy New Year Party Glasses (Contains glasses frame, temples, Happy New Year style's lens and texts) :<a target="_blank" href="https://makerworld.com/en/models/90795#profileId-97152" rel="nofollow noopener">https://makerworld.com/en/models/90795#profileId-97152</a>&nbsp;&nbsp;<h4>🌈🦄 Magical Unicorn Calendar : <a target="_blank" href="https://makerworld.com/en/models/110396#profileId-118002" rel="nofollow noopener">LINK</a></h4><h4>🌈 🦖 Magical Dinosaur Calendar : <a target="_blank" href="https://makerworld.com/en/models/114991#profileId-123662" rel="nofollow noopener">LINK</a></h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514459/2024-01-06_4a92f15c6d488.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Valentine Rose with Stem "I love you"

Valentines

5kyrunn3r

Minnie kisses Mickey Standalone&nbsp;Update 01/26/2024<ul><li>Übergang an der Blüte verstärkt, hier konnte es beim ablösen zum Bruch an einem Blatt kommen.</li><li>Transition at the flowering intensified, here it could happen to break on a leaf during detachment.</li></ul>&nbsp;<ul><li>Standfuß überarbeitet</li><li>base revised</li></ul>Farben / Colours<ol><li>PLA Generic - Jayo black</li><li>PLA Generic - Jayo white</li><li>PLA Generic - Geetech red</li><li>PLA+ Generic - Sunlu pure yellow</li></ol>Please rate my print profiles / models... ♥Bitte bewertet meine Druckprofile / Modelle... ♥

Minnie kisses Mickey Table Stand

Decor

水世界水族馆gokumine

使用可口可乐塑料瓶。Use Coca-Cola plastic bottles.

狗狗猫咪饮水机，Pet water dispenser.

MinerJ

Skull and crossbones charm for your Crocs. Recommend printing in PETG or TPU for durability, standard supports seem to work best and are easiest to remove.

Skull and Crossbones Croc Charm Jibbitz

Croc

Mr.Jay

Tired of laying your money and card on the table when playing monopoly? This card and money holder saves space on your table!&nbsp;&nbsp;

Monopoly simple money and card holder

Board Games

Toribio3D

Keycaps of the pokemon badges, compatible with cherry mx and clones or copies of the mechanism.

POKEMON BADGES KEYCAPS

Keycap

automontronic

Print in TPU for a soft padding around the watch.

Apple Watch Case (38mm & 40mm)

Apple

Eskalibure

J'ai réuni ici le meilleur des pièces de Olaf en réunissant le merveilleux travail de <a target="_blank" href="https://www.thingiverse.com/JamesRX" rel="nofollow noopener">JamesRX</a> et l'adaptation de <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a>&nbsp;&nbsp;&nbsp;Happy snowman Olaf from the movie Frozen. No extra support is needed.Sorry for separating the model in so many parts, as I want to keep as much detail as possible with minimum support. Please follow the assembly instructions to build, remember to glue the right foot as the last piece to adjust the balance, it should stand firmly just by one foot.High-res model has updated. Full body model, non-pre-supported model and adhesion tenon were added as request.Have Fun :)&nbsp;&nbsp;&nbsp;La tête a été adaptée par <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a> afin de permettre une impression multicolore avec des pièces séparées&nbsp;<ul><li>Adjust eye brow angle to bed surface.</li><li>Copy right eye brow hole to left side.</li><li>Rescale eyes to 97%.</li><li>Fill hole of head back.</li></ul>&nbsp;&nbsp;Vous pourrez augmenter la taille a 300% et dans ce cas je vous conseil de rajouter 1 wall&nbsp;&nbsp;&nbsp;&nbsp;<h4>License</h4><h4>CC BY-NC-SA</h4><a target="_blank" href="https://www.thingiverse.com/thing:440343" rel="nofollow noopener">Olaf - I wanna build a snowman!</a> by <a target="_blank" href="https://www.thingiverse.com/JamesRX" rel="nofollow noopener">JamesRX</a> is licensed under the <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons - Attribution - Non-Commercial - Share Alike</a> license.&nbsp;CC BY<a target="_blank" href="https://www.thingiverse.com/thing:3305163" rel="nofollow noopener">Olaf (modified head)</a> by <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a> is licensed under the <a target="_blank" href="https://creativecommons.org/licenses/by/4.0/" rel="nofollow noopener">Creative Commons - Attribution</a> license.&nbsp;&nbsp;

Olaf - I wanna build a snowman!

Characters

QuiqueCrimson

Compatible bricks with the most famous bricks contruction sets brands.&nbsp;Circular blocks <a target="_blank" href="https://makerworld.com/en/models/158593" rel="nofollow noopener">https://makerworld.com/en/models/158593</a>&nbsp;&nbsp;Full height<ul><li>from 1x1 to 1x6 and from 2x2 to 2x4</li></ul>Base height<ul><li>from 1x1 to 1x6 and from 2x2 to 2x4 (with and without stubs)</li></ul>Tube bricks<ul><li>1x1, base height & full height, with and without stubs.</li></ul>Lateral stubs<ul><li>1 stub from 1x1 to 1x4 blocks</li><li>1 stub per block from 1x1 to 1x4 blocks</li></ul>Lateral holes<ul><li>1 hole from 1x1 to 1x4 blocks</li><li>1 hole per block from 1x1 to 1x4 blocks</li></ul>You can use them in my contruction compatible calendars :)<ul><li><a target="_blank" href="https://makerworld.com/es/models/122699" rel="nofollow noopener">https://makerworld.com/es/models/122699</a></li><li><a target="_blank" href="https://makerworld.com/es/models/114156" rel="nofollow noopener">https://makerworld.com/es/models/114156</a></li></ul>and also my Card Holder<ul><li><a target="_blank" href="https://makerworld.com/en/models/144360" rel="nofollow noopener">https://makerworld.com/en/models/144360</a></li></ul>&nbsp;Version 1.1: Improved full height pieces. The bottom holes and pins are reinforced.Version 1.2: Added bricks with lateral studs and/or holes. Also added “tube” bricks&nbsp;Please rate your experience and post your makes :) It's very much appreciated :P&nbsp;&nbsp;

Building blocks

Random Stuff

fay3dlab

Im currently upgrading most of my suspended models to include channel to install led strips in them.. So for the suspended star destroyer V2.. since its already in 2 parts.. i added a channel path so you can install a LED strips around the outer frame.. and i put small holes in the inner frame so that the lights from the LED shines through to the ship..&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516767/2024-01-01_27386ae7989a8.gif"></figure>&nbsp;If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light https://s.click.aliexpress.com/e/_oEk0hDa &nbsp;The ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad..&nbsp;The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..&nbsp;I hope you guys have fun printing this new version of the suspended imperial star destroyer..