ronnievv

Techro3D

<p><strong>Earring organizer | Earring rack | Earring holder</strong></p><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453430/design/2024-05-04_dad7289a2bbdd.jpg"></p>

Earring organizer | Earring rack | Earring holder

Kiddo

bayfaire

<p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">This keycap uses my cherry mx base </span><a target="_blank" href="https://makerworld.com/en/models/17038" rel="nofollow noopener">https://makerworld.com/en/models/17038</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> and a multicolor print profile has been provided to print the donut, the donut cream, and the sprinkles + the keycap itself in 4 different colors of your choice.</span></p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">This keycap is meant for cherry mx switches.</span></p>

Donut Keycap for Cherry MX Keyboards

Key Caps

needitmakeit

<p><strong>UPDATE: </strong>I&#39;ve re-uploaded the bottom LH adapter, it was not showing the cutout for the wheel.</p><p>&nbsp;</p><p>These solve 2 problems with the KE and SE printers, the vibration on the Z axis due to minimal connection to the plastic base and plate below. This solution also allows for adjustment of the angle to try to get this as close as possible to 90° to the bed</p><p>&nbsp;</p><p><strong>THE VIDEO WILL BE RELEASED ON SATURDAY MORNING</strong></p><figure class="media"><div data-oembed-url="https://youtu.be/h7AghJI44VQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/h7AghJI44VQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p><p>Very little hardware is required for this upgrade, as long as you&#39;ve already done the previous 10 heat-set inserts from the previous video/upgrade, which can be found here <a target="_blank" href="https://makerworld.com/en/models/373923#profileId-281622" rel="nofollow noopener">https://makerworld.com/en/models/373923#profileId-281622</a></p><p>&nbsp;</p><p><strong>MS=Machine Screw</strong></p><p>10 pcs M3 x 5mm Heat Set Inserts (Into Arms)</p><p>10 pcs M3 x 20mm Button Head MS (Secure Arms to Adapters)</p><p>10 pcs M3 x 10mm or 12mm Button Head MS (Outboard Adapter)</p><p>2pcs M5 x 20mm Button Head MS (Inner Arm to Long Arms)</p><p>2pcs M5 Locknut (Inner to Long Arms)</p><p>&nbsp;</p><p>I&#39;ve used PETG CF - I&#39;d recommend anything stiff for this job, I don&#39;t recommend using PLA if you plan on printing inside of an enclosure. ABS, PC or other similar materials, PETG-CF works well since it is quite stiff.</p><p>&nbsp;</p><p>These need to be printed heavy, please use glue stick on these, some areas have smaller contact with the BP.</p><p>I&#39;d use 8 walls and 20% infill, Gyroid is good or Cubic, I&#39;d also thicken the infill.</p><p>&nbsp;</p><p>ENJOY!</p>

Creality Ender 3 V3 KE & SE - Stiffener Arms

v3KE

AeonJoey

<h2><strong>The Legend of Zelda - Map of Hyrule, from the NES version of Zelda.</strong></h2><p><i>Note: this is a model that has been abandoned by its creator, DarkApollo on Thingiverse. Its original URL was </i><a target="_blank" href="https://www.thingiverse.com/thing:2138498" rel="nofollow noopener"><i>https://www.thingiverse.com/thing:2138498</i></a><i> though because it is a deadlink it cannot be referenced as a remix with proper attribution. The original had the same CC/BY/NC Creative Commons license so I passed that along.</i></p><p>&nbsp;</p><h3><strong>Modifications and Updates to the original:</strong></h3><ul><li>3MF build plates arranged specifically to allow printing with a single AMS, using 4-colors at a time. See more about this below.</li><li>The entire map has been colorized in Bambu Studio</li><li>Custom direct painting in Bambu Studio to ensure no color leak-thru and best presentation (this took weeks)</li><li>Numerous CAD replacements and repairs for too-delicate-to-print elements. (<u>DO NOT ‘SPLIT TO OBJECTS’ IT WILL RUIN THE MODEL</u>!)</li><li>Each ‘room’ of the overworld map has been separated by 0.1mm to allow individual printing.</li><li>Settings tuned for fastest possible print while maintaining detail of every element. This took a LOT of trial and error <i><strong>It is extremely important to use the .3MF as-is to achieve the same results as the photos, setting the layer height to more fine quality results in too-small elements falling off the print and spaghetti-fying.</strong></i></li><li>Frame in Print Profiles.<br> </li></ul><h3><strong>How to print:</strong></h3><ol><li>HIGHLY recommended to use the<strong> Textured PEI plate</strong> for this print, it allows release of the parts after letting them sit for a few minutes very easiliy. The Smooth PEI plate and cool plates tended to stick when removing, and gluestick makes a mess with items this small.</li><li>Each plate&#39;s prime-tower preview shows the filament colors you&#39;ll need per print<img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-02_fc6ee1cdbcb8b8.png"></li><li>Load up the first 4-colors, and then slice and print, continue for each plate.</li><li>Print the PDF below on a regular color printer - to use as a template to align the parts,<ol><li><i>Caution against gluing the parts directly to this page: you&#39;ll want to wait until you have everything printed first.</i></li></ol></li><li>Take photos and post them here!</li></ol><h3><strong>Colors Used:</strong></h3><ul><li>PolyMaker PolyTerra PLA - <strong>Sandstone</strong> (gives a nice sandy appearance but any <strong>beige</strong> will do)</li><li>Inland PLA+ - <strong>White</strong> (this opaque white PLA, also known as a ‘cold white’ blocks colors from bleeding through)</li><li>Bambu PLA Basic - <strong>Blue</strong></li><li>Bambu PLA Matte - Ash <strong>Gray</strong></li><li>Bambu PLA Basic - Bambu <strong>Green</strong></li><li>Bambu PLA Matte - <strong>Black</strong></li><li>Bambu PLA Basic - <strong>Brown</strong></li></ul><p><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-02_a2ddd7611d3498.png"></p><p><i>Though 7 colors are used, you only need a single AMS unit to print 4 of them at a time per build-plate.</i></p><h3> </h3><h3>Frame:</h3><ul><li>Frame in Print Profiles, prints on X1/P1/A1 series as 2 pieces, .STL in raw files if anyone wants to recut for A1 mini</li><li>Snaps together and fits all pieces</li><li>Designed to fit inside of a 12.5x5.5 inch Shadow box picture frame like this one: <a target="_blank" href="https://www.amazon.com/gp/product/B0CRBBM7NP/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0CRBBM7NP/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&amp;th=1</a></li><li>Frame also uses Hilbert pattern for top surfaces, to achieve ‘lattice’ like appearance, change to your liking.</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_fb9a3c07a436a.jpeg"></li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_8eb8dab273218.jpeg"></li><li><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-03_f92d130623b0e8.jpeg"></li></ul><h3> </h3><h3>Display Case: </h3><p>To fit inside of this display case: <a target="_blank" href="https://a.co/d/3qGe2rY" rel="nofollow noopener">https://a.co/d/3qGe2rY</a>, there is an additional print profile labeled ‘angled’. It sits at 20-degrees tilted, and has legs to prop it up that fit in holes in the 4 corners. The additional flat piece is to glue on the bottom to keep it flat, or else it would split in half on it&#39;s own weight.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836706/2024-04-09_8e2a2f1c239e5.jpeg"></figure><p>&nbsp;</p><h3>FAQs:</h3><ul><li>What is that pattern on the top of everything?<ul><li>That is called the ‘Hilbert’ pattern, and can be changed in the Global settings to something else if prefered, this pattern appears more ‘random’ at this scale adding to more of a ‘rough’ look for the water, trees, terrain and ground.</li></ul></li><li>What if I have more than 1 AMS? I can print all 7 colors<ul><li>I&#39;m very jealous, haha, a full color version is forthcoming as a print profile soon.</li></ul></li><li>The little tree trunks look like fuzz while printing, what&#39;s going on?<ul><li>During printing a lot of the under-sides of tree-lines look like they are failing, let them finish, they provide a proper amount of adhesion and elevation for the tree-lines. Some may fall off after printing, but they will be completely intact when done. Use CA glue to re-adhere them to the ‘floor’ if they fall off during assembly</li></ul></li><li>There&#39;s whisps everywhere!<ul><li>You must use DRY filament to print this, at least below 30%, otherwise stringing will occur. For minor stringing, you can use a butane torch (like a creme brulee torch) to very very quickly, swipe past and they usually disappear. But be careful, you might melt a tree or two! best to use fine-tipped tweezers to pluck any whisps.</li></ul></li><li>Why does it look like there are 2 blues in the photos?<ul><li>It&#39;s the same Bambu PLA basic, but I had to switch to the Textured PEI plate for easier release, interestingly, that blue shows up darker when printed on the textured plate vs the smooth. go figure.</li></ul></li><li>Do I really need the Textured PEI plate?<ul><li>If you use a smooth sheet, just have a fine edged scraper or spudger to gently lift each piece, because you&#39;ll be flexing them, it may destroy them while trying to remove. Let them cool at least 5-10 minutes if you use a smooth plate before attempting to remove.</li></ul></li><li>I want this bigger/smaller!<ul><li>Please do! and post your results for others as a print profile!</li></ul></li><li>Where did this come from?<ul><li>An individual that goes by DarkApollo on Thingiverse. Its original URL was <a target="_blank" href="https://www.thingiverse.com/thing:2138498" rel="nofollow noopener">https://www.thingiverse.com/thing:2138498</a>. If you find a proper attributed post by DarkApollo, please let me know so that they can be properly attributed as a remix here as well. My contributions are primarily to be able to print this on a Bambu printer with an AMS without all of the trial and error I had to go through.</li></ul></li><li>How can I glue this together?<ul><li>Use ‘CA’ glue, search amazon for ‘CA glue’ or ask your local hobby or craft shop.</li></ul></li></ul><p>&nbsp;</p><p>&nbsp;</p>

Legend of Zelda Overworld Map for 4-Color AMS

3Dprint-K81

<p>Try to get four marbles of your colour in a horizontal, vertical or diagonal row on the shifting game board.</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_c8883910c75b7.gif"></figure><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_aa982670b2a0e.png"></figure><p>&nbsp;</p><p>But watch out! To finish your turn, you must press the central button, which will make all marbles shift one position on game board.</p><p>&nbsp;</p><p><strong>Stay focused as all marbles change position on every turn!</strong></p><p>&nbsp;</p><p>Moreover, you can also disrupt your opponent&#39;s strategy by moving one of their marbles on your turn.</p><p>&nbsp;</p><p>Insert a spring (you can take it from a normal writing pen, see photo) or if you want you can buy one on Amazon (LINK):</p><figure class="image image_resized" style="width:42.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_16527edd8043a.jpg"></figure><p>&nbsp;</p><figure class="image image_resized" style="width:42.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_2abf482645e0d.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://www.amazon.it/dp/B0C77WZC9P?starsLeft=1&amp;ref_=cm_sw_r_cso_wa_apan_dp_62G55VTSMGZ1SEEHC0KR" rel="nofollow noopener">QUARKZMAN Compressione Molla, 5pz 304 Acciaio Inossidabile, 6mm OD, 0.6mm Filo Dimensione, 15mm Libero Lunghezza, Argento Tono : Amazon.it: Commercio, Industria e Scienza</a></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/789242/2024-03-30_42f22077852e2.png"></figure><p>Have fun and good luck!!!</p><p>&nbsp;</p><p>Enjoy print and I look forward to your rating and feedback…thanks!</p>

Logic connect 4

Games

John

<p>A cute articulated otter that is very detailed</p><p>&nbsp;</p><p>Check out my other models if you like this one</p>

Cute Articulated Otter

Mini Animals

NUKDDD

<p>Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.</p><p>&nbsp;</p><p>Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊<span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Commercial rights available for all my designs at </span><a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a></p><p>&nbsp;</p><p>These eggs will look great day and night by themselves or next to other decors.</p><p>&nbsp;</p><p><a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a></p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Printed with Bambu's </span><a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> and </span><a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a></p><p>&nbsp;</p><p>No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to <span style="color:#E14747;"><strong><u>40mm</u></strong></span> in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. <span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">You can support me by using my affiliate link to purchase </span><a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> I purchased in my video and photos. I may earn a small commission.</span></p><p>&nbsp;</p><p>All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!</p><p>&nbsp;</p><p><i>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)</i></p>

Easter Bunny Egg Lamp 

Easter

Halfway_Engineered

<p>This hanger is designed to hold cup and bottle lids up and out of the way in your cabinets. Uses a single command strip One model includes a hook at the end to prevent heavier bottle lids from falling off, but the version without the hook will accomodate a wider range of lids.</p><p>&nbsp;</p><p>Print with 4-5 walls to increase stiffness. </p><p>&nbsp;</p><p>Note: If you hang heavier items from these items, PLA may begin to sag over time. I recommend ABS if sagging is observed. </p>

Command Strip Lid Hanger

Household

mikelb0013

<p><strong>Edit #2</strong></p><p>Added 3-Way connectors both Female and Male ends (currently only available on the 200mm frames, please comment if you&#39;d like this feature on the smaller frames)</p><p>&nbsp;</p><p><strong>How to Build a 3x3 Grid and Beyond</strong></p><ul><li>Image #1 3x2 Grid</li><li>Image #2 3x3 Grid</li></ul><ol><li>With the addition of the Female and Male 3-way connectors, adding extra frames can be as simple as added one Female (yellow) and one Male (green) 3-way connector (see Image #1) or more complex as a 3x3 (Image #2)<ol><li>All additions can be done by rotating, feel free to rotate in Bambu Studio to match up accordingly<ol><li>instructions for a 3x3 below Image #1</li></ol></li></ol></li></ol><figure class="image image_resized" style="width: 71.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000217207/design/2024-06-02_a636718975a54.png"><figcaption>Image #1 2x3</figcaption></figure><p>To create a 3x3 (Image #2) do the following (using the Male &amp; Female Profile):</p><ul><li><strong>Print 4</strong> female 3-way Connectors</li><li><strong>Print 2</strong> 2Way Connectors</li><li><strong>Print 2</strong> 2way Connectors-Flipped</li><li><strong>Print 1</strong> 3way-Middle Male Connector</li></ul><ol><li>Start by connecting the Top Row with 1 2way Connector, Female Connector and Flipped Connector.<ol><li><strong>Note</strong>: some middle connectors will not connect with every keyslot on their frame, which is fine!</li></ol></li><li>Add the second row with 2 female connectors and the middle male connector<ol><li><strong>Note</strong>: you will need to slot your hueforge image in the Middle Male connector at this time<ol><li>middle frames will have their access to the image blocked on larger grids and will need to be disassembled in order to be removed.  One reason this set up is great with no glue and stable</li></ol></li></ol></li><li>Lastly, connect your last 2way connector, female connector and Flipped Connector.<ol><li><strong>Note</strong>: again, you will need to slot your hueforge image in the Middle female connector at this time<ol><li>all outer edge hueforge (minus the middle bottom) will be accessible to add or remove images as you feel free</li><li>when building bigger grids, be sure to note if you need female or male connectors and their orientations, followed by adding the corresponding corner. </li></ol></li></ol></li></ol><p>If you need a Female Corner connector instead of a 2way Connector, print a Female Connector.  <strong>All</strong> female connectors/keyslots can not be seen from the Front view and work for <strong>ALL </strong>edges!</p><figure class="image image_resized" style="width: 70.06%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000217207/design/2024-06-02_8a0e5766be608.png"><figcaption>Image #2 3x3</figcaption></figure><p><strong>Edit #1</strong></p><ul><li>added Frame only profile, no connectors or slots</li></ul><p>200mm Interlocking Frames</p><ul><li>If you print the Top Left (TLNoS) or Bottom Left (BRNoS) no key slots protrude out and can be used as single use.</li><li>Top Row picture slots come from the top down. Bottom Row Slots come from the left or right<ul><li>Pictures can be taken out and replaced at all times, nothing is blocked</li><li>Can hold up to 3mm Thick Lithos or hueforge</li></ul></li></ul><p>Be sure that <strong>hueforge print dimensions* </strong>are set to 200 x 200 to fit this frame</p><p>&nbsp;</p><p><strong>*Do NOT change the dimensions of the Frames, they are set with specific tolerances and any adjustment large or small will effect how they slot together</strong></p><p>&nbsp;</p><p>Hueforge files created by @3Deekes <a target="_blank" href="https://makerworld.com/en/u/527314672" rel="nofollow noopener">https://makerworld.com/en/u/527314672</a></p><p>&nbsp;</p><p>190mm Interlocking frame can be found <a target="_blank" href="https://makerworld.com/en/models/196749#profileId-217259" rel="nofollow noopener">https://makerworld.com/en/models/196749#profileId-217259</a></p><p>180mm Interlocking frame can be found <a target="_blank" href="https://makerworld.com/en/models/226156#profileId-243905" rel="nofollow noopener">https://makerworld.com/en/models/226156#profileId-243905</a></p><p>&nbsp;</p>

200mm Hueforge Interlocking Frame: No Glue

hueforge

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><figure class="media"></figure><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.<br> </li></ul></td></tr></tbody></table></figure>