rongjianliang67

finniminni

Looking for a larger box? There is a version of this design, twice as long. It can be found <a target="_blank" href="https://makerworld.com/en/models/168092#profileId-184526" rel="nofollow noopener">here</a>.This box is designed to be printed in vase mode. It ist 125mm x 125mm wide and 70mm tall. I used my Bambu Lab P1S with a 0.6mm nozzle. The grooves of the box add stability and below the handle you have a flat spot for putting on labels.There is a second version of this box. You can find it <a target="_blank" href="https://makerworld.com/en/models/168734" rel="nofollow noopener">here</a>.

Just a Stackable Box (Vase Mode)

Study accessories 

Celestin

You&#39;re tired of seeing your desk cluttered with 3D printing debris or various waste!&nbsp;The solution is here: a trash can that attaches directly to your desk. Simply slide it on, and your waste will now be confined to one place.&nbsp;It&#39;s as simple as that: you print it and screw it onto your desk. It can be adapted to desks up to 3.5 cm thick. I&#39;ve added a piece of TPU to ensure better grip under constraint.&nbsp;I made 2 versions of my trash can, one large which you can see in the photos with a height of 160 mm, and another smaller one with a height of 115 mm, for those with less filament and who want to print faster. (The assembly remains the same.)&nbsp;And there you have it, problem solved! With its large capacity, you won&#39;t need to empty it every day; it can hold a lot for a long time.&nbsp;IMPORTANT NOTE: There may be a slight lack of grip for the trash can to hold well. To remedy this, you can apply a bit of hot glue on the top of the trash can that is in contact with the table.  After several tries, I found that the best solution was to put the trash can under constraint with the TPU. To do this, you screw the trash can normally to the table, then you remove it and tighten it a bit more. This way, when you put the trash can back in place, it will be well secured and will hardly move at all. Good impression!

Desk trash bin

storage

GauRook

120*75*65need 20mm M3 bolt*4 25mm M3 bolt*2 M3 nut*2;You can add a logo to it<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482962/design/2024-06-03_f6b0875ad2cfb.png"></figure>需要4根 25mm M3 螺栓、2根 20mm M3螺栓和2个 M3 螺帽，可自由添加logo

Tiny ToolBox 微型收纳箱

Arts

DKprints

A spinning bathroom sink organizer! The two ends of the organizer rotate in order to privide better access to whatever you choose to store! Prints on one plate and requires a push fit assembly of the four small legs into the holes in the bottom of the organizer. Happy Printing!

Spinning Bathroom Organizer 

Bathroom accessories

Harley3D

I found on one occasion the PTFE / Bowden tube came out of the coupler while printing so I decided to design and print this simple retaining clip.&nbsp;It prints in just 9 minutes and snaps into place on the coupler and prevents the tube from coming out until the clip is removed.

Bambu PTFE / Bowden Coupler Retaining Clip

Gears

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

Vehicles

xchgre

This is the large version, also the <a target="_blank" href="https://makerworld.com/es/models/107006" rel="nofollow noopener">small</a> version is available on my profile. The download includes the pdf with parts and assembly. Check <a target="_blank" href="https://makerworld.com/es/models/113196#profileId-122148" rel="nofollow noopener">here </a>for the Perseverance - M2020 Mars rover. Curiosity is a car-sized robotic rover exploring Gale Crater on Mars as part of NASA's Mars Science Laboratory mission (MSL). Curiosity was launched from Cape Canaveral on November 26, 2011, at 10:02 EST aboard the MSL spacecraft and landed on Aeolis Palus in Gale Crater on Mars on August 6, 2012, 05:17 UTC. The Bradbury Landing site was less than 2.4 km (1.5 mi) from the center of the rover's touchdown target after a 563,000,000 km (350,000,000 mi) journey. The rover's goals include: investigation of the Martian climate and geology; assessment of whether the selected field site inside Gale Crater has ever offered environmental conditions favorable for microbial life, including investigation of the role of water; and planetary habitability studies in preparation for future human exploration. Author/Origin/License: NASA Jet Propulsion Laboratory, Public Domain

Curiosity Rover (large) with instructions

Rovers

andythilo

Printed a few years ago and still sits on my PC. I wanted a more finished front so cut the original nacelle to match the model. Now Bambu have released this model I wanted to share this. &nbsp;You will require 11 x M3 nuts and bolts. The front silver piece clips in place.

Jet Engine Nose Cowl 

Jet engine

Jorge Rui

<h3>Introduction</h3>Once again, this project brings something that might be new to some – The printing of translucent materials.&nbsp;This version of the capsule is for the A1 and includes areas for:<ul><li><a target="_blank" href="https://shrsl.com/4cxx1" rel="nofollow noopener">Color Swatches</a></li><li>All nozzle Sizes:<ul><li><a target="_blank" href="https://shrsl.com/4cpof" rel="nofollow noopener">0.8 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpoa" rel="nofollow noopener">0.6 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpo5" rel="nofollow noopener">0.4 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpo4" rel="nofollow noopener">0.2 nozzle</a></li></ul></li><li><a target="_blank" href="https://shrsl.com/4cxx7" rel="nofollow noopener">Heatbed Nozzle Wiper - A1 mini</a> (A1 coming)</li><li><a target="_blank" href="https://shrsl.com/4cxx9" rel="nofollow noopener">Replacement Filament Cutter - A1 Series</a></li></ul><blockquote>If you need any of this, use this links, I will get a small help and will cost you the same.</blockquote>Once again, this project brings something that might be new to some – The printing of <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">translucent materials</a>.Despite being discussed in previous projects, it&#39;s something I find interesting and quite challenging to achieve with an FDM printer like the A1. The trick is to print slowly and at a high temperature, as <a target="_blank" href="https://www.printables.com/model/15310-how-to-print-glass" rel="nofollow noopener">widely shared on the internet</a>. With this information in mind, it becomes evident that increasing the number of layers will result in a higher level of opacity for the wall. If you possess a nozzle with a diameter of <a target="_blank" href="https://shrsl.com/4cpoa" rel="nofollow noopener">0.6mm</a> or even<a target="_blank" href="https://shrsl.com/4cpof" rel="nofollow noopener"> 0.8mm</a>, now is the opportune moment to employ it. Experimentation is key in determining what works best for your specific needs, as optimal results may be influenced by various variables. Your goal is to achieve both translucency and mechanical resistance, making it essential to explore and find the most suitable approach for your desired outcome.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_xpz0vhypcghc.jpg"></figure>For achieving a &#34;frost&#34; effect, a <a target="_blank" href="https://shrsl.com/4cpo5" rel="nofollow noopener">0.4mm nozzle</a> is the optimal choice. Remarkably, there&#39;s no need for any intricate settings—simply stick to the default ones, and the outcome will perfectly mirror the images you&#39;ve seen. Ensuring the material, especially <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">transparent PETG</a>, is as dry as possible is paramount. Excess moisture significantly impacts the performance of this material. Additionally, transparent PLA is also available for those seeking alternatives.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_4vh9za6wdlcy.jpg"></figure>Regarding the base, you can make a <a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">TPU</a> Ring or you can use a foam with the same shape. If you are interested in a foam ring, please send me a message.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_3ax0jmktu7kn.jpg"></figure><h4>Suspended swatches configuration</h4>This effect can be easily achieved with a downloadable special part.You can find these color swatches <a target="_blank" href="https://shrsl.com/4cxx1" rel="nofollow noopener">here</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_la0pf6c2guv5.jpeg"></figure><figure class="media"><div data-oembed-url="https://youtu.be/VvQqCIBVtO4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/VvQqCIBVtO4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Just change the filament settings as needed to suite your preferences, all the rest should be ok.This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation on <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">PayPal</a>&nbsp;For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks!<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a>&nbsp;<h3>Change log</h3><ul><li>(09-01-2024) - Added the A1 printer Bottom part<ul><li>(15-04-2024) Update to the A1 (not mini) bottom part. This printer has a larger Silicone nozzle now wiper, and no metallic nozzle scraper, so I&#39;ve added 2more areas for screws, and more pockets (Bottom_ring_A1.3mf). You will need more 4 magnets, total 6 magnets of 10x3mm.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2024-04-15_580f0dd622053.jpg"></figure>