romanempire4617

Toxin_Labs

<h2>The Bongle!</h2>Transform any bottle into the coolest and most useful party trick ever! The Bongle is a device that screws onto the neck of most beverage bottles (anything similar in threading to a Coke bottle) and makes it a bong! Obviously to use it, you will still need a glass slider to hold your herbs while you burn them, and the bongle is designed for 14mm glass sliders, which can be cheaply bought. This device is designed to have a 16cm long stem that goes into the bottle, which should fit even the smallest 0.75 litre bottes, while still going as deep as possible to allow the smoke in the bubbles to cool as much as possible while coming back up the water.I have uploaded another version with a shorter stem of 16cm, which is visible in the picture in grey, and I have also designed a version which does not require a bowl, but directly inserts the join. Check it out on my profile!I say the model is print in place because I already found some designs of this piece on the internet, but they all seem to have multiple twisting parts which have always made them seem unreliable, so I designed this version myself to have everything working in one piece. It might not look the best, but it is clearly functional, and a lot of air can flow through if wanted.<h4>Attention!</h4>Smoking from plastic is very hazardous. This should not become your go-to piece, or even be used for extended periods of time. First of all, I highly recommend using PETG as the filament for this piece as it is food safe and does not allow bacteria to go onto it or spread in it. Secondly, after each use, if another is intended, you should clean it as you would any other piece, or just use it a few times and print a new one. Only by doing these things you allow yourself to use this piece multiple times, otherwise, it is highly recommended that you don't.<h4>To use:</h4>Pretty simple:<ul><li>fill the bottle until about half!</li><li>screw it onto the bottle until secure! (sometimes with some bottles it might slip, just twist it until it doesn't)</li><li>check that all holes in the stem are covered by water: you can add even more if you desire a smaller, cooler hit;</li><li>fill your glass bowl and put it in the hole on top!</li></ul>And voila, ready to smoke.

Bongle (20cm) - Turn any bottle into a bong!

WimV

<h4>Operation of the lids.</h4>Below is an impression of how the lids work.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/879423bc-338e-4a96-b217-c93394eec243.gif">&nbsp;<h4>Printing</h4>The lid parts.&nbsp;The lids consist of three separate parts that have to be assembled afterwards. The two front parts (part 3L and 3R) are NOT the same! This is because the holes are slotted to achieve the mechanical locking of the lids. Part 3L is marked &#34;L&#34; on the side. Part 1 &amp; 2 must both be printed 2x.Printed in PLA, nozzle 0.4, layer thickness 0.2, infill 20% and support everywhere.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/06ba5b49-601e-4c49-af85-9929390ddfc5.jpg">&nbsp;After printing, all support residues must be removed. Do this thoroughly. There is often some extra residue on the axles due to the use of support. If necessary, cut this off so that the shaft becomes as round as possible. Make sure that the ends of the axle are slightly chamfered so that they can be mounted easily.<blockquote>For Part 1: the part with the axle. The axle can break of in use with either poor layer bonding or too much friction in the hinges. Print with 100% infill to enhance strength or use the extra part I added for use with bolt M3 (See bottom of page!)</blockquote>&nbsp;The Knob, Lock and Axle Lock&nbsp;You need 1x the Knob &amp; Lock and 2x the Axle LockFor the different parts and the correct orientation on the bed, see the image below.Printed in PLA, nozzle 0.4, layer thickness 0.2, infill 20% and no support.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/83dde606-05da-4cdf-b374-9037190c9be2.jpg">&nbsp;The Box&nbsp;For orientation on the bed, see the image below.Printed in PLA, nozzle 0.4, layer thickness 0.2, infill 20% and no support.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/030ab77c-c0c4-4206-b724-d56a93e3858a.jpg"><h4> </h4><h4>Assembly</h4>&nbsp;The lids&nbsp;Slide the different parts of the lid together. Pay close attention to the orientation! This is indicated in the image below. Notice that the shafts are pointing upwards! Once pushed together, the recess in the shaft falls over the cam in the opposite part, securing the two parts against sliding apart.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/69942bcb-86ec-41f7-b047-1d0537b76c8e.jpg">Mounting the Knob and Lock&nbsp;See image below. Notice that the axles are pointing downwards.Push the knob through both holes in the lids. Then press the Lock from below over both axes of the Knob. To obtain a firm anchoring, you can first put a drop of glue in both holes of the Lock and then press firmly.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/f1dbece2-8c02-48e2-bed9-fafd3656c26e.jpg">&nbsp;Mounting the Lids on the Box&nbsp;Place both axes of the lids in the holes of the Box. Rotate both lids to create an open Box. Now place both Axle Locks in the holes in both corners of the Box. The round part of the Axle Lock should be facing upwards. You can use a little glue to keep them in place. Be careful not to glue the axles!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/1d248058-315f-4de7-8a95-4d6a19ca4251.jpg">&nbsp;<h3>Operation of the mechanical lock.</h3>&nbsp;The lock works by interlocking 2 small printed tabs. Due to the rest position of the Knob, which is then vertical, they remain hooked together. By tilting the Knob backwards (which is possible through both slotted holes in the lids) they can unlock and you can open the lids. When closing the lids, you must ensure that the Knob is well pressed and is vertical. To be sure, you can additional tilt the knob towards you. (see video below)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/20b8ffe3-89e9-48f7-a98b-48e04b6eda40.gif">&nbsp;<h3>Box size and scaling</h3>&nbsp;The size of the Box 200x100x50 (knob not included) was created after a number of test prints for the hinges. I managed to stay within that 200mm, so it can be printed by almost all printers.But nevertheless the Box can be scaled. For FDM printing I would advise not to go below 80%). This already gives a very large saving on material and printing time, while the hinges still remain strong enough. It may be that the hinges are less flexible or operate less smooth due to the layer thickness of 0.2mm. By printing with a smaller layer thickness and/or nozzle, can you probably improve this.&nbsp;&nbsp;<h3>Breaking Axle of part 1 from the lids:</h3><figure class="image image-style-side image_resized" style="width: 36.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000423164/design/2024-06-08_47e7fbfea63f3.jpg"></figure>For this model good layer bonding is essential for the axles. In the past I made a version for use with a M3 bolt to make it stronger (see attached screenshot). Use 2 bolts M3x16. I have added that extra STL file. For the latching mechanism: ensure all, but realy all remnants of supports are removed. Mostly there are a few hard to remove remnants. Use a bore for the holes and a knife for the axles to make them smooth. Use correct temperatures and other settings for the used filament for bonding.

Storage Box with origami folding lids.

storage containers 

风暴手作

零五金件战术镰刀，战术手斧，无需任何螺丝即可拼装，建议实心打印以达到最佳手感

战术镰刀+手斧

knifes and axes 

Barika

A nice fan cover designed for the A1/A1 Mini, shaped like a Airplane engine  If you want the Silent version, please download this model: <a target="_blank" href="https://makerworld.com/en/models/481392#profileId-393164" rel="nofollow noopener">https://makerworld.com/en/models/481392#profileId-393164</a>

A1/A1 Mini Fan Cover Airplane engine

A1 accessories

ShopTeacher

Summary:A refrigerator magnet to promote making Amerca great again. No MMU or AMS necessary, simply pause on layers to change filament. Magnet measures about 3.5" (89mm) wide.&nbsp;Print settings:PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill, classic walls, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets. &nbsp;Magnets:Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.7mm so the magnet hole is 6.3x3.2. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print. &nbsp;Filament changes:Color order for filament changes: blue, white, red, black, whiteIf you stick with 0.2 layer heights: <ul><li>Layer 19 - Insert magnets</li><li>Layer 22 - Change blue to white</li><li>Layer 25 - Change white to red</li><li>Layer 28 - Change red to black</li><li>Layer 31 - Change black to white</li></ul>*Be sure to double check your slicer for layer pauses

ULTRA MAGA Magnet - No AMS

trump stuff 

FlorinV

All you need to mount this is double sided tape, or use screws if you wish.<ul><li>You can store your phone while charging when you have no furniture close to the current outlet. (instead of leaving it on the floor, you can use this holder).</li><li>The mount has also 2 lateral slots to hold your cables while there is no phone charging.</li><li>Has a big surface on the back to be sure it holds very good only with double sided tape.</li><li>Has enough space to even hold two phones.</li><li>The space inside it is : 90mm x 25mm. Enough to hold very big phones.</li><li>You can play with colors, do your country flag or whatever combinations you like.</li><li>If you wish, you can use screws to fix it</li></ul>

Phone / Cable Holder - Wall/Furniture Mount 

phone stuff

3D Print Masters Hub

“Your Wife Will Love You” Bag Clip<ul><li>Designed with unique spring tension vein for good clamping force.</li><li>Robust geometry.</li><li>Family members enjoy using this item.</li><li>Please use BRIM if you are having adhesion issue with printer bed.</li><li>Recommend using Bambu Lab PLA, which is pliable for this application.</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥&nbsp;&nbsp;&nbsp;&nbsp;

“Your Wife Will Love You” Bag Clip

kitchen stuff

Summary:Patriot Party Lion logo magnet. No MMU or AMS necessary, simply pause on layers to change filament. Magnet measures about 2.67" diameter. &nbsp;Print settings:PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% grid infill, classic walls, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets. &nbsp;Magnets:Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.7mm so the magnet hole is 6.3x3.2. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print. &nbsp;Filament changes:Color order for filament changes: blue, white, redIf you stick with 0.2 layer heights: <ul><li>Layer 19 - Insert magnets</li><li>Layer 22 - Change blue to white</li><li>Layer 25 - Change white to red</li></ul>*Be sure to double check your slicer for layer pauses

Patriot Party Lion - Magnet - No AMS

trump stuff

martin.taichl

This is a model of the Predator Shuriken as seen in the AVPs and the Predator. It comes in two versions - xxx_-_shuriken which is the simply closed shuriken. But it also comes in the open state where it has partially foldable blades (for the sake of cosplayers actually wearing them) I skipped any instruction video as this is rather simple assembly.

Predator Shuriken (Partially foldable)

AVP stuff

Kutnohormac

<div><h1>Summary</h1><div>A beautiful minimalist painting of an anubis on the wall.</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender-3 S1 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0,2</div> <pre><code> Infill: <div>15%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=-+PLA" target="_blank" rel="nofollow noopener">PLA </a><pre><code> - Notes: <div>Top/botton pattern - concentric</div></code></pre></div>

Anubis Voronoi wall decoration

Egyptian stuff 

UniDuni3d

I have my notebook on my desk setup, but weekly I need to use it on other places.&nbsp;I cound&#39;t find an easy and fast way to organize the cables down the desk, so I designed this one!&nbsp;Hope it helps you too!

Under Desk Cable organizer! Fast fix/removal

wire organizer

emp3thy

This is a full size Mjolnir. Yes, full size. It's big. It takes about 600g of filament and around 19 hours to print, even on a P1S.&nbsp;It prints really, really well. I've simplified the model so it's basically a full hammer, a top and bottom handle (and a pommel) and then then some easily glued in plates for the hammer head. It's a no-brainer to assemble but it looks amazing.&nbsp;How have I got a full size Thors Hammer onto a single plate? Lots and lots of model editing and a lot of work getting supports set up properly. I've also spent a long time arranging the model so it fits on the plate and prints well.&nbsp;This hammer is big. It feels heavy when you hold it and it really looks something. I've made 4 of them and given 2 as gifts. I've made one of these on the P1S and the print quality is just incredible.&nbsp;&nbsp;

Mjolnir - Thor Hammer

Thor hammer 

moose_

The SpaceX logo for the extruder motor visualizer window on the A1 Mini.

SpaceX for A1 Mini Window

extruder buttons and faceplates

jordanwilliamkilleen

These coozie covers are for table top gaming sessions when you want to add some authentic vibe or feel to your beverage. The larger one will fit most cans and taller cans, the smaller will fit most normal cans and shorter cans. &nbsp;They are not to be used as actual drinking vessels. They are to hold food safe containers. These are not designed to be food safe and whatever you do with them is at your own risk.

Medieval Fantasy RPG Stein Mug Style Soda Can Coozie

coozie

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

mandalorian stuff

DjangoCashflow

Matching Stand can be found <a target="_blank" href="https://makerworld.com/en/models/253473#profileId-269900" rel="nofollow noopener">here</a> Check out my other Kit Cards: <a target="_blank" href="https://makerworld.com/en/models/398440#profileId-299959" rel="nofollow noopener">Millennium Falcon</a> <a target="_blank" href="https://makerworld.com/en/models/232273#profileId-249216" rel="nofollow noopener">X-Wing</a> Take to the stars with the &#34;Imperial Lambda Shuttle Kit Card,&#34; a masterpiece of design that pays tribute to the iconic vessel from the Star Wars universe. Conceived for enthusiasts who appreciate the cinematic grandeur and engineering marvels of the series, this kit invites you to assemble and showcase a vessel steeped in interstellar lore.  Features:Precision Kit Card Design: Every element of the Lambda Shuttle is crafted with precision, arrayed on a kit card to simplify the build process. The dedication to detail ensures a model that stands true to the shuttle&#39;s distinguished silhouette.Articulated Wing Mechanism: Faithful to the shuttle&#39;s design, the wings hinge gracefully, mimicking its majestic landing and flight modes.Rich Detailing: The shuttle emerges from the print with a rich tapestry of textures and lines, mirroring the regal yet formidable aesthetic of the Empire&#39;s fleet.Engaging Build Experience: Builders of all skill levels will find joy in piecing together this model, with clear instructions that facilitate an engaging and rewarding construction process.Standalone Display Piece: As a completed model, the shuttle serves as a standalone display piece that commands attention and sparks conversations.Nostalgic and Innovative: This kit card strikes a balance between nostalgia for the Star Wars legacy and innovation in model crafting, making it an essential addition to any collection.  Embark on a building odyssey with the &#34;Imperial Lambda Shuttle Kit Card,&#34; where the saga&#39;s spirit is captured in every printed layer. This isn&#39;t just a model—it&#39;s a gateway to reliving the grandeur of a galaxy far, far away, piece by piece. Spare Parts can be found in Raw Model Folder Assembly Instructions<ol><li>Carefully remove each piece from its frame, taking extra caution with the delicate wing cannons. <img src="https://makerworld.bblmw.com/makerworld/draft/840260/2024-03-13_bbc91131f5b28.jpeg"></li><li>Securely attach both wings to the shuttle&#39;s main body. The fit is precise, so apply steady pressure to join them. Handle with care to avoid damaging any elements. <img src="https://makerworld.bblmw.com/makerworld/draft/840260/2024-03-13_16a470e7f7219.jpeg"></li><li>Fit the cockpit piece into its designated slot on the main body. <img src="https://makerworld.bblmw.com/makerworld/draft/840260/2024-03-13_1ee084350f698.jpeg"></li><li>Finally, connect the top wing to complete the iconic silhouette. <img src="https://makerworld.bblmw.com/makerworld/draft/840260/2024-03-13_21e4965c3911b.jpeg"></li></ol>Congratulations!Your &#34;Imperial Lambda Shuttle&#34; is now ready to stand proud among your collection. Witness the power of the Galactic Empire on your desk, a testament to your skill and the saga&#39;s enduring legacy. <img src="https://makerworld.bblmw.com/makerworld/draft/840260/2024-03-13_4c90c2cf3a671.jpeg">

Imperial Lambda Shuttle Kit Card - High Detail

Star Wars stuff

TripleGWorkshop

<figure class="image image_resized" style="width:75.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123339/2023-10-27_j3lvy404svvw.jpg"></figure><figure class="image image_resized" style="width:75.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123339/2023-10-27_dh8eejy44acr.jpg"></figure><figure class="image image_resized" style="width:73.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123339/2023-10-27_0pkrset7s8jm.jpg"></figure>Also Pictured: Anti-gravity Table: <a href="https://www.printables.com/model/375355-anti-gravity-table-3-piece" rel="nofollow">https://www.printables.com/model/375355-anti-gravity-table-3-piece</a>&nbsp;&nbsp;&nbsp;

⬣ Hex Wall Shelf ⬣

wall accessories

Meng Prints

Most helmet mounts come with a lot of supports needed. This one prints without support.Easiest way to assemble - turn mount 90° and assemble upper screw most way - then turn it down and assemble lower screw. Tighten both.&nbsp;3mf includes more strength in wallplate - though most helmet weigh less than 1kg not much more than 20% infill needed.

Helmet mount - no supports needed!

helmet/accessories

kurtvdv

Dual square LED lamp&nbsp;Introducing the Dual Square LED Ceiling Light, a fusion of modern design and functionality. Elevate your living space with this sleek and stylish luminary, meticulously crafted for the discerning eye.&nbsp;Key Features:LED Light: Low consumption, high brightness&nbsp;Convenient Installation: Designed for hassle-free installation, the Dual Square LED Ceiling Light comes with easy-to-follow instructions and all necessary mounting hardware, allowing you to enjoy your new lighting fixture in no time.&nbsp;Versatile Application: Perfect for a variety of settings, including modern living rooms, minimalist offices, or contemporary kitchens, this ceiling light effortlessly enhances the ambiance of any space.&nbsp;Materials Needed:<ul><li>LED strip 24V, 3,5 meter (color of your choice - I used white 3000K - +-9W/m - Warm white): <a target="_blank" href="https://www.aliexpress.com/item/1005006265030720.html?spm=a2g0o.productlist.main.17.526f5bfbZQ8rQX&algo_pvid=d2dae632-c011-4696-812d-0e255dbbc45c&algo_exp_id=d2dae632-c011-4696-812d-0e255dbbc45c-8&pdp_npi=4%40dis%21EUR%2116.89%215.07%21%21%21128.16%2138.45%21%402101e9a217075754133358695edeee%2112000036528595833%21sea%21BE%212473164128%21&curPageLogUid=QnzKL9WGXDWC&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Link</a></li><li>Meanwell 30W, 24Volt adapter (from your local electrical store or online): type Meanwell apv-35-24</li><li>Wires, soldering iron, Alu tape, 10 x M3 bolts 12mm, 2 x M3 bolts 5mm</li></ul>&nbsp;Step-by-Step Guide: Please check the assembly guide in PDF format for detailed information<ul><li>Print the 2 print-profiles:<ul><li>Print profile 1 is for the base (1 and 2), Top (1 and 2), Mounting bracket, Mounting base and 2 Arms</li><li>Print profile 2 is for the LED cover, printed in PLA  </li></ul></li><li>Take the ‘Base 1’ part and add some ALU tape on the inside (for better cooling)</li><li>Put 2 rows of LED lights (mind the start point)</li><li>Take the printed LED cover and put it on top of the base</li><li>Put the ‘Top 1’ part on top of ‘Base 1’ part and use 4 x M3 bolts of 12mm</li><li>Put ‘Base 2’ part on top of ‘Top 1’ part and connect with 2 x M3 bolts of 12mm</li><li>Add some ALU tape on the inside of ‘Top 1’ (for better cooling)</li><li>Put 2 rows of LED lights (mind the start point)</li><li>Take the 2 Arms and glue them in the correct spot (put the wires in one of the arms)</li><li>Take the printed LED cover and put it on top of the base</li><li>Put the ‘Top 2’ part on top of ‘Base 2’ part and use 4 x M3 bolts of 12mm</li><li>Slide the ‘Mounting base’ over the arms</li><li>Insert the LED transfo (Meanwell)</li><li>Switch of the electricity before connecting the lamp!</li><li>Screw the mounting bracket to the sealing and connect the mounting base with 2 x M3 bolts of 5mm</li><li>Connect the wires of the transfo to the house wiring</li><li>You are ready to switch on the light, enjoy</li></ul>You can always use another type of LED light. Just ensure you choose the correct voltage and watt.&nbsp;Dimensions<ul><li>Length (diagonal): 380mm</li><li>Width: 300mm</li><li>Height: 170mm</li></ul>&nbsp;How to printPlease use the predefined print profiles. There are different settings for each item on the buildplates to ensure the look and strength.All parts are printed by object.Everything from print profile 1 is printed in ABS. I don't recommend using PLA as this is prone to deforming by the warmth.Choose between print profile 2 and 3 for the LED cover. The LED cover can be printed in a translucent material, PLA or PC. In the pictures I have 1 printed in regular PLA+.&nbsp;Why ABS for the first print profile?LED lights produce a little bit of heat. When printing the parts in PLA, you can be sure that over time the material will deform. ABS is more heat resistant and will not suffer from the heat produced by the LED's.For the LED cover you can use any material. This is not a structural part and the LED's are not that close to it.&nbsp;When printing ABS, you will have to clean your buildplate with hot water and soap before printing. Also keep in mind ABS will shrink when it cools down. The main parts are designed to be 200mm by 200mm. But in reality after cooling down, there is only 199mm by 199mm.This is important to know, especially for the LED cover which has a 1mm clearance.In the print profile I changed the scale for the cover, so when printing in PLA (which has a low shrinkage), the cover will fit.When you print the cover in ABS, you can change the scale to 100% for a good fit.&nbsp;BuildplatesPrint profile 1:Buildplate 1: Base 1 (bottom part)Buildplate 2: Top 1 (goes on top of Base 1)Buildplate 3: Base 2 (goes on top of Top 1)Buildplate 4: Top 2 (goes on top of Base 2)Buildplate 5: Mounting base and bracketBuildplate 6: Arm 1Buildplate 7: Arm 2&nbsp;Led cover profilePrint profile 2:Buildplate 1: LED cover&nbsp;&nbsp;Print time and used materialPrint profile 1: Buildplate 1 to 7:<ul><li>Filament: 240gr</li><li>Print time: 8 hour 30 minutes</li><li>I used ABS black for Print profile 1 .</li></ul>Print profile 2: Buildplate 1:<ul><li>Filament: 9gr</li><li>Print time: 19 minutes</li><li>I used PLA+ White</li></ul>&nbsp;If you find my model useful, please like :-)My other models: <a target="_blank" href="https://makerworld.com/en/u/1830894672" rel="nofollow noopener">https://makerworld.com/en/u/1830894672</a>

Dual LED ceiling hang lamp

lights and lamps

mayermatthew06

A funny plant pot to grow some flower in.

Butt Planter Garden Flower Pot - Self Watering - Funny Gift

plant stuff

game stuff

deividp9519

Simple base to display a M4 airsoft replica, compatible with any airsoft model that accepts M4 magazines. &nbsp;Printed in bambu lab PLA-CF.&nbsp;Only compatible with airsoft models, not compatible with real models.

420

storage containers

knifes and axes

A1 accessories

trump stuff

phone stuff

kitchen stuff

trump stuff

AVP stuff

Egyptian stuff

wire organizer

Thor hammer

extruder buttons and faceplates

coozie

mandalorian stuff

Star Wars stuff

wall accessories

helmet/accessories

lights and lamps

plant stuff

game stuff

gun stuff