rolf.peeters

davglass

Just a painted version of this AC-DC sign: https://www.printables.com/model/643850-ac-dc-band-sign

AC-DC Band Sign

Music

jwalker55

Spiral Vase

Pots and Vases

rostap

Folding hook. Size 40x60x13mm (without cover) 48x24x13 (with cover) My print settings<ul><li>Material: PETG</li><li>Layer height: 0.15mm</li><li>Perimeters: 6</li><li>Orientation of the hook on the bed: Side</li><li>Supports: No </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/37818/2023-09-26_3t33473cpkpj.png"></figure><h5>Updated (added) </h5><h4>Added alternative cover mounted under frame. </h4>For easier printing and better building I made cover, which is screwed with frame to the wall. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/37818/2023-09-26_0hsybq9kk284.png"></figure>Print settings<ul><li>Material: PLA or PETG</li><li>Layer height: 0.15mm</li><li>Perimeters: 2</li><li>Supports: No</li></ul>&nbsp;

Foldable hook

Hooks

WagZPrintZ

Gnome 2 of 3! Keep an eye peeled for the rest coming soon! &nbsp;&nbsp;

Christmas Gnome 2 

Xmas

Storage

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

Bambu Addon

Markus710

headphone & headset holder / stand / headset holder / hanger&nbsp;The bottom is hollow, if you want to put something heavy in there like sand.

headphone holder / headphone stand / headset holder / hanger

2Print

Amao Chan

This is an African elephant with 22 movable joints. The joint design of this elephant is different from the common chain-like design. These joints can be adjusted and fixed at different angles, allowing the elephant's trunk to be lifted and posed in various preferred positions. The tightness of the joints depends on the hardness of the materials used for printing. Using harder materials will result in tighter joints.&nbsp;The reason it is named "Blank" is to encourage the printer to add color to the elephant's body. For those with multi-color 3D printers, they can try printing each segment in different colors.&nbsp;When printing, please start by printing the tail. If the tail can rotate properly, then use the same printing settings to print the other parts. If the tail gets stuck and cannot rotate, please reduce the material flow to continue printing.&nbsp;3D printing settings Layer height - 0.2mm Infill Density - 12% No supports. <a target="_blank" href="https://www.facebook.com/amaochanstudio/" rel="nofollow noopener">https://www.facebook.com/amaochanstudio/</a> <a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a>&nbsp;多關節素坯非洲象這是一隻有22個可轉動關節的非洲象這隻非洲象的關節設計與常見的鍊條式的設計不同，這種關節可以調整角度後固定，因此這隻大象的鼻子可以抬起並且擺出自己喜歡的姿態。大象的關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。之所以取名為(白胚)的原因，就是鼓勵列印者能幫大象的身體上顏色，若有多色3D列印機的朋友就可以試著在每一段使用不一樣的色彩列印。&nbsp;列印建議 列印時請先列印尾巴，若尾巴能正常轉動，就以相同列印設定來列印其他部分。若尾巴卡住無法轉動，請減少材料流量來列印。 層高-0.2mm 免支撐 填充-12%