robodrakon

Berdox

A remix of this <a target="_blank" href="https://makerworld.com/en/models/38160#profileId-36895" rel="nofollow noopener">quest 3 to quest 2 adapter</a>&nbsp;It adds room for hook style quest 2 head straps to be used with the quest 3

Meta Quest 3 to Quest 2 Head Strap adapter for hook style

Ziqpel

<h2>Amolen & Locyfens 200g Spool Adapter for AMS </h2>Background: As I often purchase Amolen color packs, which come in 200g spools, I needed a straightforward, sturdy, and reliable adapter for my AMS. Unfortunately, I was never completely satisfied with the designs released so far, so I took the best aspects from all designs and created an entirely new adapter. Here is my attempt to develop the best spool adapter for using Amolen 200g spools in the AMS. Design: Both adapter plates are equipped with 4 fixing points each, which fit into the existing holes of Amolen spools. This prevents the spool from slipping within the adapter. Additionally, both adapter plates are screwed together, which clamps the spool securely and keeps the fixing points on the spool. Filament Clip:Since i don't like to bend my Filament to hold it in place, i left the typical holes out and designed my adapters to fit the "<a target="_blank" href="https://makerworld.com/de/models/39041#profileId-39030" rel="nofollow noopener">Not another Filament Clips</a>" by <a target="_blank" href="https://makerworld.com/de/u/4001667508" rel="nofollow noopener">Brent Peterson</a>, which are intended for the original Bambulab spools. After Print: You need to loosen the screw and thread a bit initially. Directly after printing, they might be a bit stiff since the threads have minimal play. This allows for clean tightening even after repeated use. Amolen seems to use two slightly different spool types. One fits perfectly into my adapter, but with the other, the holes are a bit closer together, making it not fit the adapter right away. The User “<a target="_blank" href="https://makerworld.com/en/u/915122463" rel="nofollow noopener">sixty5low</a>” has found a pragmatic solution here—you just need to cut off one pin for each, thanks for that! You can see pictures of his solution in the comments. Closing Words: I would greatly appreciate feedback, and if you have any questions, issues, or suggestions, feel free to share them! :)

Amolen/Locyfens 200g AMS Adapter Spool

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

vr

AMS

To print