rob.sweeney61

AdditiveAmerica

For that perfect time when you just need to tell someone to ‘Grogu Yourself’! &nbsp;Look for the Peace Sign version, too!&nbsp;Mandalorian / Star Wars-inspired fan art utilizing HueForge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Latte Brown At layer #24 (2mm) swap to Mint Green At layer #32 (2.64mm) swap to White for the rest.

Grogu Yourself - HueForge - Mandalorian/Star Wars Inspired

Grogu

Arctic23

My first try with HueForgePrint dimensions: 160x160x2<h2>Printing instructions:</h2>Print at 100% infill (I did 12% - it works too, I guess) with a layer height of 0.12mm with a base layer of 0.2mm Filaments Used: PLA ULTRA SILK Eryone Gold Transmission Distance: 5* PLA Eryone Galaxy Purple Transmission Distance: 6* Swap Instructions: Start with Metallic Gold At layer #5 (0.68mm) swap to Galaxy Purple for the rest.&nbsp;*TDs for these filaments not tested

Cool Alpaca (HueForge)

Work Ideas

TheMiguelBi

<h2>Cute little animals magnetic cable holders</h2>&nbsp;These little animals are perfect for a <a target="_blank" href="https://makerworld.com/en/models/158883" rel="nofollow noopener">desktop lawn</a>: <a target="_blank" href="https://makerworld.com/en/models/158883" rel="nofollow noopener">https://makerworld.com/en/models/158883</a>&nbsp;Neodymium magnet Ø5mm and height 3mm required. Printing profiles for cables with a diameter of Ø 4mm. For cables with a smaller section it is sufficient to make a few turns with adhesive tape (Scotch) to slightly increase its volume.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464111/2024-01-27_72ee644817e4.jpg"></figure>&nbsp;Enjoy! ^_^

Ladybug and Bee Magnetic cable organizer

Magnets

Jan Design

For your beloved driver in your life, a gentile remidner that it is worth slowing down.

Drive Safe I love you keychain 

Key Chains

S.3D

-groot02-supported arms-printed in pla-CF green

Groot 02

Groot

TheCreativeLily

3D Plate Sign of ‘The Batman’ Movie logo.&nbsp;Size: 200 wide x 96mm x 6mm deep.&nbsp;Designed with just 1 layer change - if scaling up/down this layer change would need to change with it. Can also be printed without AMS by pausing at layer 21 (0.2 layer height) and changing from black to red.

The Batman Wall Plate Sign (<2 Hr. Print)

Figures

Warlock

Took my One Pride keychain and turned it into this awesome home decor piece

Detroit Lions One Pride home decor

Sports

Roger Borchelt

Here is a fun little 16 color door decoration!!  Have fun printing!!

Rainbow Leprechaun

Holidays

3D Prints This Week

Load gray and white into ams (or any preferred color combo)&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Kitchen Sign / Wall art / 2d art / funny

Kitchen Ideas

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;