rlbol767

Chrizzo

Here you get a remix of Skarans Raspberry PI Camera Mount which was originally for Prusa MK3S (IR-Pi Cam Prusa i3 MK3/MK3s Camera mount Swivel Package). I just remixed it a bit that it fits to Sovol SV06. I also rounded it a bit.

Sovol SV06 Raspberry PI Camera Arm

Sovol

ShakaStudio

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ JAYO Black Transmission Distance: 0.8 PLA+ Creality Red Transmission Distance: 2.8 PLA+ Inland Egyptian Blue Transmission Distance: 4 PLA+ Creality Fl Orange Transmission Distance: 3.6 PLA+ JAYO Meta White Transmission Distance: 6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Egyptian Blue At layer #17 (1.44mm) swap to Fl Orange At layer #21 (1.76mm) swap to White for the rest.

Nike Jordan 1 - Hueforge Filament painting

Pictures

Rilot Designs

I needed to measure a dimention that was inside a lip. Unfortunately I didn't have a micrometer. What I did have was a digital caliper, Fusion 360 and a 3D printer.They will clip on to most calipers you can buy on 'tinterweb (I have 3 different types and they all seem to have the same jaws).

Calliper extensions for more precise measurement of thicknesses

Tools

Markus710

headphone & headset holder / stand / headset holder / hanger&nbsp;The bottom is hollow, if you want to put something heavy in there like sand.

headphone holder / headphone stand / headset holder / hanger

printable

Merla3D

### Easy, printed in place, flat surface with only 3 colors.With this file, you can check the transparency of your colors. Please compare them with the image above to check the results!&nbsp;Recommended Colors: -Black -White -Color&nbsp;but you can check with any color you want! This model is printed facing down.&nbsp;**FAQ** *What CWB means?* C is for color, W is for White and B is for Black. It's a guide to know which colors are used in every test and in which position.&nbsp;*Can I use other colors besides Black and White?* Yes! You can use any color you want, just swap the color on the slicer.&nbsp;*Wich use does this test have?* You can use it to test if your filament transparency is good enough to print one of our Retrovibes prints!&nbsp;*Can it be printed using another material?* We recommend using PLA tested with our "Color blending tester" included in this file. But you're free to try with other materials, have fun!&nbsp;*This is for multicolor printers?* Yes, it's meant to be used only on multicolor printers.&nbsp;*Only 3 colors, what's the trick?* We take advantage of the natural transparency of the colors to make them blend with each other using thin layers. With this technique, you can print with different values using only 3 colors!&nbsp;*Can I change the layer height?* We don't recommend changing the layer height, this model is specially designed to be printed in 0.2 layer height. We can't warranty good results with other heights. If I don't have a multicolor printer, i will be able to print it? Unfortunately no, this print is designed to be used only on printers with multicolor systems. If you know how to modify G-CODES and have an idea to solve this, please contact me at hello@merla3d.com. This model is a remix of the one that THESAMENAMETWICE made, he is the amazing artist responsible for the creation of this technique, check his unique works at [here](https://www.printables.com/@TheSameNameTwice).&nbsp;

Color Blending Test

test prints

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

Bambu lab parts

squinn