riottot

polvaque77

If you need to scale the file, remmber to not change the thicknes (height).Enjoy the file!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA JAYO Black Transmission Distance: 0.3 Bambulab PLA Basic Bronce Transmission Distance: 16 PLA JAYO White Transmission Distance: 6 Bambulab PLA Basic Gray Transmission Distance: 2&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Bronce At layer #15 (1.28mm) swap to White At layer #20 (1.68mm) swap to Gray for the rest.

buddha Hueforge + frame

Hueforge

aPyroDesign

This Marble Track Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as one piece by simply changing all of the models to a single color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes on the spinners are actually frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Assembly GuideEasy assembly video: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Filaments used in this project.&nbsp;Jade white for the base and whites on balls: Click <a target="_blank" href="https://shrsl.com/4ex4o" rel="nofollow noopener">HERE</a>&nbsp;Orange for small inner slide: Click <a target="_blank" href="https://shrsl.com/4ex4v" rel="nofollow noopener">HERE</a>&nbsp;Bambu Green for large outer slide: Click <a target="_blank" href="https://shrsl.com/4ex4k" rel="nofollow noopener">HERE</a>&nbsp;Silver Silk for Single color: Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a>&nbsp;All links are Affiliate links&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap.&nbsp;(Optional) Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners? Check out my Patreon for more info. Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>

Marble Track Zoetrope Spinner

spinners

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

helmets & masks

πxel8ed

Started with designing a “ship in a bottle”. Ended up with this.&nbsp;Updates:<ul><li>1/20/2024: Updated model to double the strength of the webs. Check out the “V2” profiles.</li><li>1/16/2024: Uploaded a few tweaks to the Designer Profile (One, two, and three color versions) which enhance small details on the ship and improve print reliability</li><li>12/26/2023: Added “Optional Uplighting Kit” profile. It&#39;s a fast print, compatible with a variety of LED&#39;s and fits nicely. Makes the base of the model more significant so also a nice upgrade to add a contrasting portion to the base. Pick plate one or plate two depending on your preferred LED&#39;s:<ul><li>Plate 1: Fits the LED puck from the <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">Bambu Labs LED Lamp kit</a>.</li><li>Plate 2: Allows the installation of a length of LED light strip (or fairy lights) of various types. If you&#39;re just getting started with custom LED installs <a target="_blank" href="https://youtu.be/exAWzMfmwQ8?si=8TnrTyI9Lngt3264" rel="nofollow noopener">check this video out</a>.</li><li>Plate 3: Includes a lens that fits in the model base to diffuse the light from the LED&#39;s. The Bambu LED is very bright so I prefer printing the lens in white or colored PLA rather than translucent.</li></ul></li></ul>The Designer Profile (One, two, and three color versions) supports all Bambu Lab printers. Just make sure the Designer Profile is selected in Bambu Handy, click Print, then select the plate you want. If you instead open it in Bambu Studio you may need to select your printer model at the top left dropdown and choose to transfer all settings before slicing and sending to the printer.<ul><li>One color takes ~7hrs</li><li>Two color takes ~8hrs</li><li>Three color takes ~24hrs!</li></ul>Big thanks to <a target="_blank" href="https://makerworld.com/en/u/319145709" rel="nofollow noopener">@zviratko</a> for figuring out a work around to make one color prints reliable.&nbsp;Suggestions on removing support material if it does not just pop off initially:First, be sure to let it cool down completely before attempting to remove the support. We want it to be stiff, not flexible.When removing the support; hold the ship portion of the model firmly with one hand, with the other hand use the biggest needle nose pliers you can to grab the support chunk from the bottom where it was attached to the build plate. Make sure you have a firm grip and twist the pliers clockwise/counter-clockwise then pull straight out. Take your time. Don&#39;t expect it to pop off in one go. You&#39;re just hoping to cause some cracking noises. Then move the pliers to a different spot and repeat the twist/pull to hopefully create some more cracking noises. You&#39;re trying to achieve the same effect as when you bend a paperclip back and forth until it breaks. Eventually the support will come loose, just be patient.&nbsp;Enjoy!

A long time ago in a galaxy far, far away....

star wars

cosplay & accessoires

Noël

laisch

<blockquote>Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it</blockquote><figure class="image image_resized" style="width:32.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-12_c39e11d978104.png"></figure> Found this Idea in the video of pocket83 and had to do a 3D printed version of it<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=SoMkAkV62v0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SoMkAkV62v0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>The model prints without supports if you use 0.2mm layerheight.&nbsp;For furhter hardware you need at least 2 M5x20mm hex nut screws. You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-03_tkq9czc274jr.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Quicky (Angle grinder wrench)

électroportatif

moritzb57

This is a card box for UNO Flip based on the rugged box by Whity.Glue the inner box to the bottom and take care of the orientation. The inner box has a small dot. This has to face forwards.The other things you need are 6 <a target="_blank" href="https://bit.ly/3izqOcy" rel="nofollow noopener">M3x30mm screws</a> and of course UNO Flip cards.

UNO Flip Card Box

jeux de société, cartes...

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place Double Storage Customizable Divider Parts BoxNot just for Bambu Lab parts! Makes a great jewelry box, too!&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45645#profileId-47422" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-28_e2af4207409738.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45645#profileId-47422" rel="nofollow noopener">Customizable Dividers</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>Flip Top Lid:<ul><li>Allows for double the storage! The Flip Top prints on a separate plate and is super easy to install. When the Flip Top snaps closed it sits tight to the top dividers so even the tiniest screws won't fall out or move to another compartment! In short, your parts STAY where you put them!</li></ul>&nbsp;Flip Top Installation:<figure class="table" style="float:left;width:50%;"><table style="border:2px solid hsl(0, 0%, 100%);"><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-31_5a34a1d06579c.gif"></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"> </td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Flip Top Storage Box

boîtes

origoworld3d

T-REX Dinosaur for wall art decoration made via Hueforge. Colours are included in 3mf file (made in OrcaSlicer and BambuStudio) but can be adapted according to your needs. The stl file is also included if you want to make your own experiment. It was printed with a 0.08mm as layer height and 0.16mm for the first layer, and 100% infill with rectilinear pattern.Don't forget to upload your make!&nbsp;Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Sakura Pink Transmission Distance: 2.8 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 2.5&nbsp;Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Army Blue At layer #6 (0.56mm) swap to Lava Red At layer #10 (0.88mm) swap to Sakura Pink At layer #14 (1.2mm) swap to Sunrise Orange At layer #19 (1.6mm) swap to Cotton White for the rest.

T-REX Dinosaur (Filament Painting) - HueForge

Animaux

MKCAMC

I created this stereo phone amplifier to provide better sound when watching videos or playing music. Sound is gathered on the right side from the downward firing speakers at the base of the phone. Sound is gathered on the left side from the forward facing speaker at the top of the phone. If you would prefer this to be the other way, the files can simply be mirrored in the slicer. I specifically designed this amplifier to fit an iPhone 13 Pro Max. The slot to place the phone in measures 170mm. This model can easily be scaled on the x axis to accommodate any phone though. I provided a version that is split in order to fit on the build plate, as well as a solid version. The split version has guide pins/holes to aid in allignment. Simply use your favorite glue and the two sides will line right up. Enjoy!

Stereo Phone Amplifier

Smartphone

ChipCE

<h3> SKR Universal case for Bear and Original Prusa frame</h3>I modified the Einsy case to be use with BTT SKR main board.<ul><li>Fit both SKR1.3 and 1.4. </li><li>Added some zip-tie slot for cable management and secure the input,bed,hotend cable.</li><li>Fit both bear and original mk3 frame.</li><li>Compatible with Bear parts.</li><li>Active cooling with 2 4010 blower fans.</li></ul><ul><li>clip.stl is optional, this will be use to secure the wiring. Only needed if you route the cable via the 2nd hole.<h3>Print Settings</h3></li></ul>Printer Brand:MK3Printer: <div>Prusa i3</div>Rafts:Doesn't MatterSupports: <div>No</div>Resolution:0.2mmInfill: <div>30%</div> Filament: Any PETG AnyCategory: 3D Printer Parts

SKR Universal case for Bear and Original Prusa frame

Prusa

Guilouz

FLSUN V400 Stock Runout Sensor Mount for replacement.

FLSUN V400 - Runout Sensor Mount

Flsun V400

Estriam

This is the belt tensioner used on the Flsun SuperRacer AWD - it requires to use a long M3 screws and a M3 nut (ideally Self-Lock Nylon style). 3 tensioners are needed for a Delta. The tensioner can be used to tension any 9 or 10mm GT2 belts.

Flsun SuperRacer AWD - Belt tensioner

Flsun SR

Kyaenos

An upgraded model of my original silica dryer spool.after a lot of testing and a lot of reviews and advice i've redisegned the spool to Dry out the silica gel that all of us use in the AMS or in the spool to dry out the filament.this version reduce to 0 the mess done with the silica and has 0 leak.the hole in the spool now are 0,8 mm so it can fit also the silica gel i'm using now that is 1mm of diameter.&nbsp;There are 2 version: “normal” won't fit the AMS, "little" will fit the AMS (quantity of the silica that can hold is the same)BOTH version works with the SUNLU FILAMENT DRYER S1, S2 and S4&nbsp;simply put one half on the other trough the pin (adding some glue is better), add the silica with a funnel (you can use the model i designed)<a target="_blank" href="https://makerworld.com/en/models/53330#profileId-55104" rel="nofollow noopener">https://makerworld.com/en/models/53330#profileId-55104</a>and put the screw cap on.&nbsp;dry out our silica gel it's never been easier!&nbsp;enjoy!

Silica dryer spool V2 for SUNLU S4, SUNLU S2, SUNLU S1

accessoires impression 3D

TotalChaos

Thanks to everyone who downloaded and printed V1.I have listened to everyones feedback and made some changes.&nbsp;This is now an improved version with better speed & glide capabilities, it also includes a launcher for ease of use.All you now need is an elastic band for the launcher.&nbsp;Hope you all enjoy the V2, it flys amazing This is best printed in PETG single or multicolour - flex build plate to remove as the wings are fragile. NEW FIGHTER JET GLIDER - DOWNLOAD NOW FOR SOME EXTREME FAST PACE FUNhttps://makerworld.com/en/models/55493#profileId-57047

Speed Glider V2 With Launcher - Easy Fast Print

ça vole

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

personnages

MFDesigns3D

Deadpool Nightlight cover.This is the nightlight I used in pictures https://a.co/d/2Nmryt2

Deadpool NightLight Cover

lampes

Chris Pirillo

Introducing the adorable 3D printable Baby Yoda (Grogu) model, a must-have collectible for Star Wars fans and 3D printing enthusiasts alike. This captivating design perfectly captures the irresistible charm of the beloved character from the hit series "The Mandalorian."Original image generated in MidJourney, STL’ed in HueForge.&nbsp;This meticulously crafted flat model brings Baby Yoda to life with astonishing accuracy. The intricate details of Grogu's endearing facial features, large round eyes, and pointy ears are flawlessly replicated, showcasing the remarkable craftsmanship of the design. Or… close enough.&nbsp;Once printed, this Baby Yoda model becomes a versatile addition to your Star Wars collection. Display it on your desk, shelf, or even use it as a charming decoration for special occasions. Its flat design allows for easy placement and transportation, making it an ideal gift for fellow Star Wars enthusiasts or anyone captivated by the lovable creature from a galaxy far, far away.&nbsp;Let this 3D printable Baby Yoda (Grogu) model bring joy and a touch of Star Wars magic into your life. Whether you're a fan of the series, an avid collector, or simply looking for an exciting 3D printing project, this model is sure to delight and impress everyone who encounters it.&nbsp;Obviously, this description was written in AI, too. LoL&nbsp;I sliced this at a .08mm layer height. <ul><li>Black to layer 4</li><li>Dark grey to layer 6</li><li>Light grey to layer 25</li><li>White to layer 38</li></ul>