rikus.smit

ZEE SOLO

A simple row of hooks for IKEA Skadis boards. Mounted using the <a target="_blank" href="https://www.printables.com/model/256896-skadis-t-clip-system" rel="nofollow noopener">T-Clip System</a> by <a target="_blank" href="https://www.printables.com/@LineArcLine" rel="nofollow noopener">Line Arc Line</a>. Can also use <a target="_blank" href="https://www.printables.com/model/540362-skadis-t-clip-mini-parametric" rel="nofollow noopener">T-Clips mini</a> by <a target="_blank" href="https://www.printables.com/@capze_178225" rel="nofollow noopener">capze</a> to fit flush. They come in two versions - one for black/white Skadis boards, and one for unpainted ones. (not included here, please download from the creator)

IKEA Skadis/ Skådis Hooks - T Clips

Print Queue

tomjesper

Bolt measuring tool remixed to fit on a Gridfinity 3x1 baseplate.&nbsp;Printed well on Bambulab X1 using standard PLA and 0.2mm layer height.

Gridfinity Bolt Measuring Tool (3x1)

Gridfinity

Benjamin Kott

This model is intended for continual development, fostering openness. If you have suggestions or requests, please share them in the comments or via direct message. Please do not upload different sizes as remixes or add profiles of it, use the customize button to make your own version.If you like it, press the button!<h2>Parametric Sorting Tray</h2>This model is designed to build trays with customizable dimensions. The length and width can range from 80 to 300mm, while the height can go from 10 to 300mm. Although I don&#39;t recommend a 300mm height for a sorting tray, it&#39;s up to you to decide what works best for your needs. The trays have small chamfers on the outside and fillets on the inside to make it easier to retrieve objects. You can customize the corner radii with default options of 10mm, 20mm, and 30mm. The inner corners will adapt automatically based on your choices.&nbsp;To ensure the model generates correctly, the corner radius might be adjusted depending on your configuration of columns, rows, width, and length. I tried to make the model as robust as possible, but please check it in the slicer afterwards to ensure it meets your expectations. Unfortunately, I couldn&#39;t find a way to output the generated sizes directly to the tool, and adding text would result in it being printed, so I didn&#39;t use that option.&nbsp;You can adjust the number of columns and rows from 1 to 6. I&#39;ve found that more than this can make the tray unusable, but if you need more columns or rows, let me know. The first cell has a spanning option, allowing it to cover multiple rows or columns, which provides more customization options. Due to current limitations with MakerWorld, we&#39;re restricted to this first cell for now.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476243/design/2024-05-27_4055492226df7.png"></figure><h3>Available Parameters</h3><h4>Dimensions</h4><ul><li>Length: 80 to 240 mm - Default 160mm</li><li>Width: 80 to 240 mm - Default 160mm</li><li>Height: 10 to 240 mm - Default 20mm</li><li>Radius: 10 / 20 / 30 mm - Default 10mm</li></ul><h4>Columns and Rows</h4><ul><li>Columns: 2 to 6 - Default 2</li><li>Rows: 2 to 6 - Default 3</li></ul><h4>First Cell Spanning</h4><ul><li>Colspan: 2 to 6 - Default 2</li><li>Rowspan: 2 to 6 - Default 2</li></ul>&nbsp;<h3>Updates</h3>28.05.2024<ul><li>I was asked to be able to make even bigger trays. Even they will not fit any “known” BambuLab printer anymore. I´ve raised the limit for width, length and height to 300.</li></ul><h3>More Parametric Models</h3><figure class="table"><table><tbody><tr><td style="width: 50%"><figure class="image"><a href="https://makerworld.com/en/models/392542#profileId-293647" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476243/design/2024-03-24_ff2c3f05d69cc.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542#profileId-293647" rel="nofollow noopener">Stackable Box / Boxes</a></td><td style="width: 50%"> </td></tr></tbody></table></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!

Parametric Sorting Tray / Trays

Parametric

ngprint

Metric M8 Screws/Bolts/Nuts/Washers&nbsp;These models are optimized for FDM 3D printing and should fit without the need for rescaling.No supports needed if you print them standing.They are still compatible with standard metal bolts/nuts.For better strength, try printing them with a few more wall lines.Smaller layer heights result in better threads.&nbsp;DIN 933 Hexagon head screwsDIN 934 NutDIN 1587 Cap NutDIN 315 Wing NutDIN 125 WasherDIN 9021 Washer&nbsp;Other sizes:<a target="_blank" href="https://makerworld.com/en/models/378318" rel="nofollow noopener">M6</a><a target="_blank" href="https://makerworld.com/en/models/378447" rel="nofollow noopener">M10</a><a target="_blank" href="https://makerworld.com/en/models/378461" rel="nofollow noopener">M12</a>&nbsp;Recommended Print settings:-PLA/PETG/ABS/PA/PC depending on the use case-0,16mm layer height or smaller-minimum 4 wall lines-4 top an bottom layers-30% Infill&nbsp;

Ultimate Bolts, Screws, Nuts, and Washers Set M8

Design Aid

Mc2.project3D

Bellissima farfalla sospesa io l'ho stampata anche con doppio colore usando un trasparente PLA-TWINKLING della ZIRO (effetto cascata).&nbsp;Per Bambu Studio devi stamparla con il generatore di muri in Arachne.In Cura o PrusaSlicer devi selezionare Stampa pareti sottili per essere sicuro di vedere le linee.&nbsp;Ho messo a disposizione tutti i file.&nbsp;-file intero della farfalla (da fare monocolore)-file diviso in tre pezzi così da poter colorare a piacimento (multicolore)-tutti i 3mf, Bambu e Prusa.&nbsp;Link Instagram:<a target="_blank" href="https://www.instagram.com/mc2_project3d/" rel="nofollow noopener">https://www.instagram.com/mc2_project3d/</a>&nbsp;Buona stampa&nbsp;

Suspended Butterfly

Decoration

Biffiest

My wife just got her CPAP machine and I printed this to help me manage the hose to help her sleep better. She uses N30i nasal mask so it attaches on top of the head.Very specific for our headboard but please feel free to remix it to suite your needs.Orient as shown.

CPAP Hose Accessory

CPAP

Akelyte

V2 IS OUT! I HIGHLY RECOMMEND USING V2 OVER V1!&nbsp;V2 CAN BE FOUND HERE — <a target="_blank" href="https://makerworld.com/en/models/164470#profileId-180595" rel="nofollow noopener">VERSION 2</a>&nbsp;--------------------------------------------------------------------------------------&nbsp;Introducing the Z-Shield V1; a superior Z-Axis Cover for Bambu Lab P Series and X Series Printers. I’ve seen countless Z-Axis Covers for the P and X Series that simply sit in the recessed hole for the Z-Axis rod. I was never a fan of these designs, as I don’t want any component of my printer unnecessarily rubbing against plastic every time the bed moves.&nbsp;These can be printed in PLA if chamber temps are kept on the low side, but printing in ASA or ABS would yield better results. I'd appreciate any feedback, comments, or ratings if you liked this model, or would like to see some modifications made!&nbsp;Key Features:<ul><li>Universal Compatibility: The Z-Shield has been meticulously engineered to be compatible with all Bambu Core-XY printers. Whether you own an older P1P or a top-of-the-line X1C, you’ll have no issues with fitment.</li><li>Fast Printing Capability: Efficiency is key in 3D printing, and the Z-Shield stands out in this regard. Printing with supports, most models should take an hour or less to print.</li><li>Camera-Friendly Design: Understanding the importance of the built-in camera in Bambu printers, I’ve added an additional model of the Z-Shield with a recessed corner. This design ensures that the cover remains completely invisible to the onboard camera, allowing for uninterrupted monitoring and recording.</li><li>Non-Contact Protection: The non-contact design ensures there's no friction between the cover and the moving parts of the printer, thus preserving both the cover’s and the printer's integrity.</li><li>Durability and Aesthetics: The Z-Shield not only offers robust protection against environmental factors but also adds a sleek, professional look to your printer.</li></ul>&nbsp;Installation:You should hear an audible click as the Z-Shield seats into position.<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_7b1608fe96c01.gif"></figure>There should be approximately 1.2mm of clearance between your build plate and the Z-Shield on the left side of the printer. Make sure it is fully seated towards the left side of the printer. The right side cover will have plenty of clearance but should be installed in the same way.<figure class="image image_resized" style="width:59.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_a020bd16214b8.jpg"></figure>&nbsp;Without Camera Cutout (Cover is Visible):<img src="https://lh7-us.googleusercontent.com/i-LEeFsZ7mhDzLJoBrUFpaK5Cn5Ayh42kzByMlxjRzr8UvIq2a5LPpTnoe78sli4vxMe6kIyHyXK_228t2mwJlRtrkD-04mPqnYroHSkVYS-0WNieazHfjjHJfkTJJ3wlqeZr-n8ZRD_Kc9tQuQpT5J8avjcPYlg8IYEr5WYu7Y5RglaqBmpirXS-tBbXA">&nbsp;&nbsp;With Camera Cutout (Cover not Visible):<img src="https://lh7-us.googleusercontent.com/kTBd3_n4No1vWBt2XkfTouic3bVZd__YhO3Mgr0JYj-t8Hl48ZjBFeqc4WncfWH8GNcoTiL1w7pK1VieXHvNaKYcEIPeV91I3hxKaDiNlWuEQwHQI3y6uasFrQPMhFufEWhsRysiBWzlHUh2FFM2JeqDPc9vVaxofvwg2YZg12ArH8JV-M9sqQPhV_Ytxg">

Z-Shield V1 - Z-Axis Cover for P1P, P1S, and X1C

P1P Upgrades

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;The Flexi Crocodile! This little Croc is a quick and easy print with a lot of color combination possibilities! happy printing!&nbsp;If you like my work, check out my <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a> where I upload almost every week :)&nbsp;

Flexi Crocodile 

Mimi Print Please

NinjaDuck Prints

Designed with a 0.3mm clearance. This model will bridge a 27mm distance towards the end of the print, the P1P default settings have no problems with this.&nbsp;<h4>Warning</h4>Do not press auto-arrange in your slicer otherwise this print will not work. The part is separated into 3 different objects to make it easier for AMS or other multi-colour printers. If you print directly from the Bambu Handy phone app and increase the number of copies, the app will auto-arrange the parts.&nbsp;Slicing<ul><li>0.16mm Layer Height</li><li>3 Walls instead of infill</li><li>No supports</li><li>No brim</li></ul>

Fidget Gears - Print in Place

Fidget

miker73

Needed the phone charger on the other side due to where I sleep on the bed. Decided to remix the legs while I was at it. Uses 2 screw and I added little rubber cupboard door bumpers to the legs for traction.Requires: 2ea M4x12mm screws. Added second leg option to improve stability.

Samsung charging pad stand

Apple

Nanodesigner

Differenza per le 2 versioni di hotend completi consiste nel calzino che è ampio di larghezza sui lati, non cambia l'hotend completo, il nome è hotend_c_V2, o come componente step e part con numero 9.Giusto un lavoretto per esercitarmi. Ho ricreato un hotend completo della Bambu Lab X1C, così se vi serve per usarlo come modello di esempio nei vostri lavori. L'ho salvato in 3 modalità, completo, senza calzino silicone, e senza calzino e fan così potete scegliere. Scusate se la clips entra nel modello da un lato, ma è un modello non elastico. Nei link alle mie pagine sono disponibili i file solidworks e step del sistema.Come sempre sperando di aver fatto cosa gradita per la comunità, vi ringrazio molto, e se vi fa piacere, donazioni su questo link https://www.paypal.me/RAIAGENNARO al prezzo di un caffè sono sempre gradite almeno per il tempo speso o per sviluppare altre soluzioni o contributi utili, e in caso pubblicate il tutto, per favore almeno citatemi e visitate la mia pagina instagram @nd_nanodesigner. Buon lavoro da “NANODESIGNER”. &nbsp;Difference for the 2 versions of full hotend consists of the sock which is wide in width on the sides, does not change the full hotend, the name is hotend_c_V2, or as step and part component with number 9.Just a little job to practice. I recreated a complete Bambu Lab X1C hotend, so if you need to use it as an example model in your works. I saved it in 3 modes, full, without silicone sock, and without sock and fan so you can choose. Sorry if the clip enters the model from one side, but it is a non-elastic model. The solidworks and step files of the system are available in the links to my pages. As always, hoping to have done something welcome for the community, thank you very much, and if you like, donate on this link https://www.paypal.me /RAIAGENNARO for the price of a coffee are always appreciated, at least for the time spent or for developing other useful solutions or contributions, and if you publish everything, please at least mention me and visit my instagram page @nd_nanodesigner. Good job from “NANODESIGNER”.

Complete Hotend Assembly Bambu Lab X1C Steel Nozzle

Model STEP

SDK_3DS

Stackable threaded cups. Great for organizing. Each base is threaded so you could have an endless tower of cups full of all sorts of goodies or items of your choosing. &nbsp;3 files <ol><li>Threaded Cap</li><li>Cup with threads on both top and bottom</li><li>Cup with threads only on top</li></ol>

Stackable Threaded Cups

Storage and Organization

riccardo.galdieri

Unity Axis Gizmo! I saw it on one of Sebastian Lague's videos and I felt in love with it, and since I couldn't find a way to buy it well, I made it myself! :) I printed the three axis groups separately to avoid filament waste, but you can also recombine them and print the whole thing together depending on your machine!

Unity Axis

Education

Kit Crafters

This is a Filament Hanger for a closet/dowel rod that is one-sided and includes a filament clip to help ensure there aren't any tangles.&nbsp;While there are already other filament hangers, I designed this one because I didn't find a suitable one that was one-sided and didn't require taking apart the hanger to get the filament spool out so I designed my own. It comfortably holds 1 kg spools and smaller spools.The orientation of the hook can also be changed to your preference. Everything is held together with pressure and friction fits.&nbsp;The spool uses 58 grams of filament to print and PLA+ is recommended while PLA is still suitable. (Black hangers in picture are PLA+ while white hangers are regular PLA).&nbsp;There are 2 profiles, one for a single Filament Hanger and one for two at once!&nbsp;Enjoy organizing and storing your spools!

Filament Hanger w/ Clip

Filament

d.horak93

Numbers cake topper

Celebrate 

Lumiax 3D

Being an introvert AND an HSP, I often find myself in the need to let everyone around me know, that I need me-time without dirsturbance, without having to spend energy on getting people to understand.So I made a sign to hang on my office door and decided to share it. The sign can be printed in one go and then painted if you wish, in separate parts or with multicolor printing. The frame and text are included in the base, so if you want a different color for that, you will need to insert a color change there. <ul><li>Bottom layers set to 2 and the top at 2-3 (3 is best).</li><li>I don't recommend going below 25% infill, otherwise the top surface could get uneven if your bridging isn't on point.</li><li>2 walls will be fine.</li><li>I recommend using a brim for better adhesion, especially on the battery outline, indicator and lightning part, unless you know your adhesion is good.</li></ul> Main dimensions are 150x100 mm Glue the parts on the base, in whatever horizontal direction you prefer, if printed in parts. Mount it with double sided tape, or hot-glue to a small rope, yarn or whatever you fancy. Heck, glue it to a stick and plant it outside your door if you wanna go beyond the household. I do custom signs. Just reach out. :)

Introvert/ HSP Sign

Signage

lecourrieldeh

This is a simple model I made for my cat, Madame. She loves to scratch her neck on any corner so I decided to ‘’upgrade'' the one on my kitchen Island.  I printed it upright and almost full with four perimeters, four tops and four bottoms. To make the pointy bit even pointier, I printed it using 0.15 mm layer height.  See my new BIG Scratcher: https://makerworld.com/en/models/146284#profileId-159303

Corner Scratcher for Cats

Cats

manuelmvela0

This is a work in progress, I have been working in it for some time now. It will take me a few weeks to finish it, so please, forgive me.It is a small shelf (0,7 x 0,6 x 1,9 m), with 3 levels. The midle bars are for resistance. It has 2 locks that you must fit to a wall. Also, has some magnetic supports fot 1 or 2 acrylics at the sides. Finally, it has supports for tools, alcohol, etc. The upper level is thought for storing filament, but you can place a printer also as I did, but it is hard to reach it and you will need a stair. I share the editable files, I didn't finish this proyect on time, so I hope, this files help me in explaining myself better. Happy printing.

Printers Shelf

Printer Setup

mbo-tech

During moving we broke one of the center supports of our bed.I tried to find one online but they all had not enough stroke so I designed my own.&nbsp;It's for sure slighlty overengineered but it does its job.The parts were printed in BambuLab's PETG-CF (profile attached) and they turned out great. However I just used this material to have an excuse to finally test it. You should be fine with PETG / PLA+ etc. Just make sure to increase the walls and infill.

Bed / furniture support foot (200 - 350 mm)

Repairs

cv6Channel

All hex drivers are always somewehre on my table.So I got the idea to build a stand for the pack of 4, where they fit ferfectly.For example this set: <a target="_blank" href="https://amzn.to/3qyinTc" rel="nofollow noopener">https://amzn.to/3qyinTc</a>Print in 0.2 layer height. 3 walls and 10% infill should be enough.I added a version with the numbers inset, and one version with the numbers as objects, so that you can easy colorize them as you want. This is prepared in the 3mf file.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/503573#profileId-419039" rel="nofollow noopener">See also my new top to not hurt your hands. </a>&nbsp;I you like this feel free to boost this or <a target="_blank" href="https://buymeacoffee.com/cv6channel" rel="nofollow noopener">buy me a coffee</a>.

Stand for hex screwdrivers

Tools

Jurloo

this part prevents the door key from falling out. it has to be adjusted according to the door.<h3>Print Settings</h3>Printer Brand:CrealityPrinter: <div>CR-10</div>Rafts:NoSupports: <div>No</div>Resolution:0.2 mmInfill: <div>20%</div>Filament:Das Filament PLACategory: Organization

Key stopper - prevents the key from falling out

Security

UoAoE3D

Update 19/05/2024Printing Profile updated<ul><li>0.28 Layer Height for 0.4 Nozzle</li><li>Vase mode for fast printing</li><li>Optimized for faster printing (almost %50 faster!!)</li><li>Stronger walls</li></ul>Update 05/05/2024:<ul><li>added 3 more sizes 6cm, 17cm and 24.9cm</li></ul>I needed to have my cable ties handy on IKEA Skadis board, while I was looking around, I found this design by <a target="_blank" href="https://www.thingiverse.com/thing:2966266" rel="nofollow noopener">TheRooster</a>, it was perfect but with only one size (8cm), so I remixed it to have 2 more sizes (11.6cm and 15.2cm) while still using the original Hook.&nbsp;Print the container using the Vase option and the hook with your normal sittings.

IKEA Skadis - container (Vase Mode)

Skadis

Luc1f3r

Lasst doch bitte ein Like da, wenn Ihr was downloadet, kostet doch nichts!Dies ist ein Tuner-Knopf für unseren Prusacaster, er passt perfekt auf das Thomann-Kit.Tuner Knop for Prusacaster

Tuner Knob for Prusacaster (Stimmwirbel Knopf)

PrusaCaster

JakobF

Simple but very handy door stopper / wedge. The hole in the middle fits most door handles where the wedge can be kept when not in use. It can be printed in under 30 minutes and works well to keep doors from slamming.

Door Stopper / Wedge

Functional Prints

Daryl Bateman

A filament guide for 2020 extrusion like the top extrusion on ender 3 printers and other printers0.2 layer heightsupports needed on filament guide A/B use tree/organic they work best 2 x 608 bearings needed for assembly2 x 10mm m3 bolts and t nuts

Filament guide for 2020 extrusion

Ender

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

Engineering

Bambu Lab

A1 mini test model - Swatch Display Board by Bambu Lab

Swatch Display Board by Bambu Lab

Filament Swatch

Rilot Designs

This is similar to other tools available but I wanted to create my own. It's in use daily.Everything should print without supportsTo complete you will need:3 x Idlers6 x V rollers1 x 2040 V-slot extrusionM5 boltsGT2 beltWeights (I use 608zz bearings)&nbsp;I've included STEP files so you can customise to your liking

Heat set insert installation tool

Finishing Tools

BC Designs

Based on the popular measuring tool and pinching the idea from another model to make this wallet size. The previous model had sunken text and I wanted raised text for a 1 colour change print on the Bambu X1C.&nbsp;The included 3mf file is setup at 0.16 layer height and set for a 2 colour change print. If you are printing manually change colour on the last 2 layers.&nbsp;&nbsp;

Screw measuring tool. Wallet edition. M2-M10, 4-86mm

Measuring Tools

Filar3D

Give some life to your business card with the embosser system - 1 Design Included: Lightning Wanna make your own Custom Rollers? Fusion360 files + video tutorial → <a target="_blank" href="https://cults3d.com/en/3d-model/gadget/make-your-own-business-card-embosser-fusion-360-files" rel="nofollow noopener">FUSION360 FILES</a> <figure class="media"><div data-oembed-url="https://youtu.be/V0X9hO-8_uA?si=LK7mVouRukH5EY4c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/V0X9hO-8_uA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Get the FULL 13 PATTERN PACK here: <a target="_blank" href="https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system" rel="nofollow noopener">https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system</a>13 awesome Designs available on the link: · Like a Sir · Dots · Waves · Checkers · Lightning · Fancy · Connect · ZigZag · Smiley · Sunglasses · Headphones · Flexing Emoji · Hearts HOW DOES IT WORK? Simply turn the rollers and a cool pattern will emboss on your card. HOW MANY PARTS? The whole system consists on 4 prints: ·Body_cap1 ·Body_cap2 or body_cap2_tigther_tolernaces ·Roller_a ·Roller_b Of course you can print 1 single body and swap rollers, they just pressure fit.&nbsp;PRO TIP: Use it not only on business card, get creative and make other awesome pieces of art.

The Business Card Embosser System

Cool Stuff

RobDrivesCars

It's just a tray™ … or is it?Well, it is, but it's a small tray for small parts. Specifically, I designed these for screws when I'm working on fulfilling orders that require I sort specific length screws and count the quantity, but this could be useful for anyone doing any sort of small electronic disassembly!This is StackBox v2. It has several big upgrades over v1:<ul><li>No supports needed, ever.<ul><li>The bottom of the tray has flared. This allows for the ez-stack system do its job using simple bridging</li></ul></li><li>The spout has been redesigned<ul><li>It's now on an angle, meaning screws are less likely to spill out</li><li>The </li></ul></li></ul><figure class="image image_resized" style="width:63.34%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_5lqjwej5c6id.gif"></figure>The base of the tray has a divided interior which allows you to sort two or more different types of items (like two sizes of screws) on either side. I also added ridges to catch small features like the lip of the screw head so it makes for easy sorting/counting.<figure class="image image_resized" style="width:39.77%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_xrseczvlcuch.jpg"></figure>I also added a small funnel at the corner of the tray. This “spout” will just fit into a 2x3-inch (50x75mm-ish) bag in case you need to store those sorted items for whatever reason. There is a small lip right before the spout to prevent loose screws from just falling out of the spout.<figure class="image image_resized" style="width:39.3%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_da87h1awsd5l.jpg"></figure>On, and did I mention they can stack? Because they can. It's kind of the whole point and it makes storing multiple kinds of screws or small parts for a single project super simple.There's also a small friction-fit lid in case you want to keep those parts free from the eyes of wandering cats.This print has been simplified to just three files:<ol><li>Small Tray: 10mm high walls</li><li>Medium Tray: 25mm high walls</li><li>Lid: It's a lid, kind of! There is no securing other than friction-fit (which depends on your printer tolerances). This is more to prevent bumps and spills.</li></ol>----The original v1 of this model (which is retired and will no longer be updated) <a href="https://www.printables.com/model/493058/" rel="nofollow">can be found here</a>.

Stackbox - The Stackable Small Parts Sorting Tray (v2)

Garage

agepbiz

The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support structures&nbsp;update10.07.23I have fixed some mesh issues on the large blade. I recommend that you redownload the blade&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/HZ3v7kSPpac"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=HZ3v7kSPpac"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/HZ3v7kSPpac" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;Printsettings: No raft No Support Structures 0,15mm layer heightWARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.

Pocket Copter

Toys

mcgybeer

Cute Mini Octopus, the original!It's designed so it can be printed at once. No assembly or supports required.Spare tentacle available as well, no need to discard failed prints!

Cute Mini Octopus

Moving

K2_Kevin

<h2 style="text-align: center">Bambu Labs 6 Piece Tool Set</h2><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">NEW LABELED Version now available HERE!</a><img class="image_resized" style="width: 33.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_cafe0726686af.png"><figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure><figure class="table"><table style="border: 2px solid hsl(0, 0%, 60%)"><tbody><tr><td>Included Tools:<ul><li>AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer &amp; Hub.</li><li>AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)</li><li>AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)</li><li>Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.</li><li>2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.</li></ul></td></tr></tbody></table></figure>&nbsp;If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity). They&#39;re designed to fit magnets snugly, but you might need a little glue for some of them.<h3>NEW TOOL SET HOLDER: <a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a></h3><figure class="table"><table style="border: 2px dashed hsl(0, 0%, 90%)"><tbody><tr><td>Example usage:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/bda22def-b638-4952-8963-d468f39e906e.webp"></td></tr></tbody></table></figure>&nbsp;<h3>Checkout some of my other models…</h3><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 52.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_450eebd518686.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img class="image_resized" style="width: 52.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_20146411d27.png"></a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_853680d87f4e1.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener">https://makerworld.com/en/models/81622#profileId-86911</a><a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener"><img class="image_resized" style="width: 52.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_2082d4a4681bf.png"></a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener">https://makerworld.com/en/models/131156#profileId-142275</a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_f618df312f7da.png"></a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener">https://makerworld.com/en/models/152636#profileId-166673</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener"><img class="image_resized" style="width: 52.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_de1a3154efbf3.png"></a>&nbsp;&nbsp;&nbsp;This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool

Bambu Tools - Bambu Lab Tool Set -Disconnect Tools

Bambulab Tools

Cali-Dragon!Is your printer able to produce quality prints? When printing organic models you don't really care about precision and tolerances, you want them to look pretty. This small print allows you to test:<ul><li>Surface smoothness (aka layer consistency)</li><li>Stringing</li><li>Small perimeters</li><li>Overhangs</li><li>Ghosting</li><li>Details</li><li>Multicolor</li></ul>If printed in multiple colors, I encourage you to print several at the same time. Build a Cali-Dragon army!