richardmac64

Zappelbrox

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA Default White Transmission Distance: 5&nbsp;Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to Dark Brown At layer #20 (1.68mm) swap to White for the rest.

hueforge