richardainman

alstonr96

I created a travel case to hold q-tips and flossers. It is compact and should easily fit into a toiletry bag. &nbsp;This model does not require any hardware like some other cases that are posted on here. It is all snap in place.&nbsp;There are 3 parts, the top, bottom and latch. I have the print profile set up with two different options, one where you can print all of the parts at once but all the same color. And then another where you can print the top and bottom one color and the latch another on a different print.&nbsp;All of the snap fits are meant to spin somewhat freely. Be careful removing the support and make sure you get it all off. There are a couple of strands that like to stay on the bottoms of the shafts, shown in the picture below.&nbsp;<figure class="image image_resized" style="width:38.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/749401/2024-03-22_fe48fb5c17a56.png"></figure>&nbsp;Good luck printing!&nbsp;

Travel Case for Q-tips and Flossers

cases

MNeilson

This is similar to my other resin paddle, but made with a 3/8&#34; hex, 8&#34; long, and larger, beefier paddles for bigger mixing projects. Costs about 50 cents to print!

Epoxy Resin/Silicone Paddle for Drill, Large

tools

PLAmenPRINT

Cool set of Ludo Pawn Figures with base diameter of aprox. 15mm.The model is high quality mesh and can be scaled as you wish.

cases

tools

games