rfourquet

YelTrik Designs - Click FOLLOW

ARC DESIGN! This arc design is a simple model and simple install and is a very effective in helping to reduce the likihood filament feed and pullback errors. This is not an overly complicated solution for the AMS internal hub! It doesn't require screwing something into place that could potentially damage your very expensive AMS! No screws required! It's critical the AMS internal PTFE hub function as designed without interference. This solution attaches only to the PTFE tubes improving and maintaining proper alignment of the PTFE tubes, at a consistent and specific distance from the hub, for smooth filament feeding and pull back! Simple design, print, and results.&nbsp;Check Out User Reivews and Feedback&nbsp;Simple To Print And Install:Simple to print and install. Don't be fearful of the install if you haven't yet dissembled your AMS. BL has an excellent and simple Wiki on this process. See Installation Procedure below.&nbsp;&nbsp;SEE INSTALLATION PROCEDURE BELOW <a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener">CLICK HERE TO CHECK OUT THESE OTHER PTFE ACCESSORIES</a>&nbsp;INSTALLATION PROCEDURE <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub" rel="nofollow noopener">https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub</a> NOTE: You do not have to remove the AMS Internal Hub. You only need to separate the AMS enclosure from the Spool Roller Assembly.&nbsp;Once you have the AMS disassembled it will look like this: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_16513408f15088.jpg"></figure>&nbsp;&nbsp;The next step is to remove the PTFE tubes from the AMS Internal Hub:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_a3bae2917401e8.jpg"></figure>Once the PTFE tubes have been removed from the Hub, install the AMS Filament Pull Back Guide on each tube. Move it up higher than needed initially<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_01acb3f912e128.jpg"></figure>&nbsp;After all the PTFE tubes have been installed in the AMS Filament Pull Back Guide, reinstall the PTFE tubes into the Hub and move the AMS Filament Pull Back Fix as seen in this photo:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/388682/2023-10-28_3901d04a158868.jpg"></figure>&nbsp;Assemble the AMS in the reverse order you followed to disassemble it. NOTE: Remember to plug in the electrical connectors or you'll have to repeat the disassembly and reassembly procedure, which could be frustrating. Don't ask me how I know. ;-) That's It!

AMS Filament Feed & Pull Back Errors

printer mods

NC-Designs

Ever feeling indecisive about where to eat? Find yourself in a “no, where do YOU want to eat” battle with your spouse? Meet the Dinner Spinner!&nbsp;&nbsp;Make My Sign Info&nbsp;This model is powered by Make My Sign from MakerWorld (www.makerworld.com/en/makerlab/MakeMySign). Using Make My Sign and their SVG import tool, anyone can create additional logos or custom text for things like chores, activities, date night, games to play, etc. Most of the SVGs for the restaurants shown came from either <a target="_blank" href="https://worldvectorlogo.com/" rel="nofollow noopener">https://worldvectorlogo.com/</a> or <a target="_blank" href="https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#." rel="nofollow noopener">https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#.</a>&nbsp;To create your own logos or custom pieces to fit in the box, use the following settings in Make My Sign (these settings will minimize the amount of color changes as well):<ul><li>50mm x 50mm Shape</li><li>10mm Corner Radius</li><li>Medium Border with 0mm Offset</li><li>Thicknesses:<ul><li>Base Plate - 1mm</li><li>Text & Sticker - 0.2mm</li><li>SVG - 0.2mm</li><li>Shapes - 0.2mm</li></ul></li></ul>When you download a custom piece, I recommend downloading the 3MF file as it makes coloring much easier (don't color by face but color by part under the “Objects” tab instead). There are also some tricks I learned like using “Negative Part” type and deleting overlapping parts that come with the SVG to get the exact coloring you want.&nbsp;Assembly Instructions&nbsp;Each of the logos snap into place in the back of the dinner spinner. I recommend either:<ul><li>Printing all pieces except the logos, then one logo, and then scale the logo in ~0.1% increments until you get the fit you want. Then print the rest of the logos at the same scale.</li><li>Printing the logos you want and then the fitment test piece. Depending on that fitment you can adjust the scale in ~0.1% increments until you get the fit you want. Then scale the dinner spinner, spinner, spinner axis, and optional backing plate the same amount.</li></ul>There are spots for two 5mm x 2mm thick magnets (<a target="_blank" href="https://a.co/d/8JerZ9a" rel="nofollow noopener">https://a.co/d/8JerZ9a</a>) to be glued in each corner for putting it on the fridge. I ended up adding a third magnet to each corner that sticks out a little bit to make it more secure to the fridge.&nbsp;There is also an optional backing plate that has a cutout for mounting to a wall if wanted.&nbsp;&nbsp;Thanks for viewing, downloading, rating, etc. Any feedback is welcome!&nbsp;&nbsp;

printer mods

saved