Always nice to see multicolor prints in multiple parts. Great design that snaps together easily without glue.

No issues, very lightweight and filament saving thanks to base mode

Resacled the model, no issues

Resacled the model, no issues

Rescaled the model, no issues

Printed with no issues

No issues with the print, good model

Cute design, good to see colored parts printed separately to avoid waste. They are easy to glue on in the included divots of the snowman.

Always nice to see the different colors printed separately to avoid filament waste. As a warning to others, the contact surfaces of the star are already small. If you scale the model down like I did, be aware of potential adhesion issues. I had to add a brim.

Cute design, no issues when printing

The print worked fine, but the model has 8 MILLION triangles, making the file 100 MB and making Bambu Studio lag when slicing or even just opening it. You can use the built-in "simplify model" feature at the highest quality setting and reduce that size by 95% with no perceptible quality difference.

The connectors on plate 3 are lying on their edges, which have a fillet, and therefore a very small contact area with the plate. All 4 parts warped and separated from the plate at different times. I had to reprint the plate with a rim. Otherwise a great design, fits perfectly. I changed the holes for the magents I had at hand.

Printed in PETG with 100% infill, just to be sure (it's not much material anyways). Feels really solid and fits perfectly.

The two parts didn't fit together properly. I could push them together with a lot of force, but then the outlet couldn't turn in the groove as intended. It took shaving off some of the top part with a cutter knife (and reprinting the bottom part, because the groove got damaged in the process) to make them fit properly. But now that it fits, it's a good model and works well.