reiner214

anselor

Wraps the edges of ae eSUN 1kg cardboard spool with 199mm or 200mm diameter<h3>Features</h3><ul><li>Improves contact and rotation in the AMS</li><li>Protective layer to prevent cardboard from deteriorating and cardboard dust damaging the AMS</li><li>Integrated filament clip</li><li>Name clearly visible to identify what spool it is for</li><li>Sturdy design - I found that many other designs were too thin and broke easily when removed.</li><li>Avoids blocking filament holes in the cardboard spool</li></ul><h3>Instructions</h3><ul><li>Measure your spool first to ensure the diameter matches the adapter (199mm or 200mm)</li><li>The ‘right&#39; ring is wider and has the filament clip. It must be on the right side when the spool is in the AMS.</li><li>See photos</li></ul><h3>Notes</h3><ul><li>Print Material: I recommend PETG or PHA as they are more flexible and less prone to breakage.</li></ul><h3>Other Brands</h3><ul><li><a target="_blank" href="https://makerworld.com/en/models/498762" rel="nofollow noopener">Anycubic 198mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469009#profileId-378262" rel="nofollow noopener">Beyond Plastic 199mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469147" rel="nofollow noopener">California Filament 199mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/471591#profileId-381226" rel="nofollow noopener">Creator 198mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/472420" rel="nofollow noopener">Duramic 199mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469077#profileId-378368" rel="nofollow noopener">Elegoo Rapid 198mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469077#profileId-378368" rel="nofollow noopener">Eryone 197mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/472410" rel="nofollow noopener">eSun 199mm/200mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/472426" rel="nofollow noopener">Overture 199mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/498735" rel="nofollow noopener">Polymaker - 199mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469527" rel="nofollow noopener">Printed Solid - Jesse 200mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/469636#profileId-379066" rel="nofollow noopener">Regen PHA 197mm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/471947" rel="nofollow noopener">Sunlu Elite 194mm</a></li></ul>

eSUN AMS Cardboard Spool Adapter 199mm/200mm

filament adapter ring

MarvilousCreations

Presenting a sleek and customizable award trophy 3D model, designed for understated elegance. Its minimalist and versatile surface allow for easy personalization, making it the ideal symbol for commemorating various achievements. Simply open up in bambu studio and apply whatever text/logos you wish. Placeholder text included with model as an example. Trophy prints in two pieces and easily slip together with or without glue.

Customizable Award Trophy

trophy

gitd

w00lfy

Large, but flat dessicant container for large dryboxes like IKEAs Samla containers.Holds about 600 grams of silica beads.Very large surface area, so it dries the air quickly.&nbsp;To screw shut, align the two small “handles” an screw the lid on clockwise. Can be a bit tricky to close, but is sturdy once screwed tight.&nbsp;If you slice it yourself, use 0 top and bottom layers. A 55% grid infill makes for a nice mesh top and bottom.

Large flat Dessicant container

dessicant

Reuter_Corp.

Build Plate Holder for 3 plates. A1, X1 & P1I added a Profile specialy when you use a Coolplate, now the first slot is larger for a perfect fit.&nbsp;Update 22/12/23&nbsp;I created a 5 plate version:<a target="_blank" href="https://makerworld.com/de/models/109150#profileId-116614" rel="nofollow noopener">https://makerworld.com/de/models/109150#profileId-116614</a>&nbsp;Update 02/01/24&nbsp; Infill → To Gyroid + 1 extra Toplayer&nbsp;Update 04/02/24&nbsp;I created a A1 Mini version :v<a target="_blank" href="https://makerworld.com/de/models/122357#profileId-131819" rel="nofollow noopener">https://makerworld.com/de/models/122357#profileId-131819</a>

Bambu Lab Build Plate Holder

plate holder

SaitoSquare

8cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects.A small bump is added in the middle for extra security. The panels can be placed side by side. <img src="https://makerworld.bblmw.com/makerworld/draft/798465/2024-03-12_9aa1d7e5f6cae.png">

IKEA Skadis Shelf Panel (8cm x 8cm) - Sturdy

Skadis

deltastudios3d

UPDATE: Added a print profile that has stronger hinges after receiving feedback&nbsp;I was looking for a rugged case that could clip together, meaning you could carry more than one at a time.after much prototyping i finally came up with a design i was happy with!&nbsp;Prints nearly fully without supports, the only parts that need supporting are the clips for interlocking the cases, you could try printing without and laying them flat on the bed but the clip tends to delaminate when connected together.&nbsp;all screws self thread into the model so care needs to be taken when tightening them to ensure they dont strip out.&nbsp;to assemble the case you will need:2 x M3 x16 machine screws2 x M3 x20 machine screws6 x M3 x 10 machine screws2 x M3 washers (optional)&nbsp;Assembly instructions:&nbsp;Attach the handle to the lid using two M3 x 10 screws, these need to be tight but the handle needs to move freely if it is too tight add washers between the handle and lid.using four M3 x 10 screws attach the two side clips into the recesses of the lid on either side, ensure the clips are facing flat side up with the holes towards the edges of the case.&nbsp;Attach the two clasps to the front of the case using M3 x 20 screws, these should be inserted with the heads of the screws facing towards the edges of the case.&nbsp;Connect the hinges using two M3 x 16 screws once again these should be installed with the screw heads facing the edges of the case.&nbsp;Finally press fit the gasket into the groove on the lid of the case, this should be a tight fit and might need pressing in with a flat tool ensuring the flat side of the gasket enters the groove first.

Medium Rugged Box - Compatible with other boxes!

SpectreGadget

FYI, I have created several other versions.  Print the R4 profile for the new AMS<ul><li><a target="_blank" href="https://makerworld.com/en/models/30631#profileId-112717" rel="nofollow noopener">AMS Glass Separation LED Riser for COB LEDs</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190027#profileId-209722" rel="nofollow noopener">Glass Separation LED Riser (no AMS)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190665#profileId-210450" rel="nofollow noopener">Glass Separation LED RIser for COB LEDs (no AMS)</a></li></ul>*** UPDATE 12/18/23 - <a target="_blank" href="https://makerworld.com/en/models/14025#profileId-104675" rel="nofollow noopener">R4 profile</a> now live with these updates:<ul><li>Supports NEW AMS design and should support all AMS designs</li><li>Wider channel for NEON LED strips since the newer ones are a bit wider. Narrower strips may need 3M tape to secure</li><li>Slightly decreased bottom perimeter improve fit for some filaments/settings that may cause some &#39;elephant foot&#39; at the base</li><li>Added small lip at front to keep glass in place for more energetic printer movement</li><li>Increased gap between parts by 0.05mm to make assembly easier for some materials that are less exacting</li><li>Added numbers on the bottom to help with aligning for assembly</li><li>Added Holder Clips to the R4 profile, four on each of the two plates. Brim is enabled for the clips.</li></ul>I originally started to make a riser with vents for when I print PLA, but decided to go a different route. I wanted to meet these requirements:<ul><li>Move the AMS off the top glass</li><li>Be able to vent the top, but keep the glass with the printer</li><li>Easily remove the glass to get into the printer, without moving the AMS</li><li>Add additional LED lights in the form of “neon” type LED strip</li><li>Keep as minimal / minimalistic as possible, with a low profile and not take a lot of filament, &lt;500g</li><li>Keep it all together, avoiding wall mounting or sitting to the side</li></ul>The light strip I use is the vimeepro 5V USB LED Neon Lights Strip 3.3ft neon Rope Lights Flexible Waterproof Neon LED Strip that I bought from Amazon: <a target="_blank" href="https://www.amazon.com/gp/product/B0BB724ZS9" rel="nofollow noopener">B0BB724ZS9</a>. I like these lights as they provide good additional light without washing things out. If those are not available, you could use the 6&#39; one and cut it short as needed. <a target="_blank" href="https://amazon.com/gp/product/B0B73VGSCL" rel="nofollow noopener">B0B73VGSCL</a>. Availability of these seems to go in and out of stock. I would think that similar “NEON”-type LED strips should work. Another option provided by <a target="_blank" href="https://www.printables.com/@moebis" rel="nofollow noopener">@moebis</a> is <a target="_blank" href="https://share.temu.com/u5L2QMYplFA" rel="nofollow noopener">https://share.temu.com/u5L2QMYplFA</a>&nbsp;This riser has a second shelf above to hold the glass top, allowing venting, but keeping the top with the printer.The gap between the parts is 0.1mm for the original profile so it&#39;s meant to be a tight fit that stays together. The R4 profile has slightly larger gaps at 0.15mm.&nbsp;No supports required. If you only print PLA, then printing in PLA will be ok. Best to print in either PETG, ASA, or ABS, especially if your chamber temps get to 50+ as then you are getting close to the glass transition temp of PLA and could cause problems.&nbsp;“Holder Clip.stl” is a clip that can be used to hold the LED power cord along the back before exiting the riser. “Holder Clip.3mf” has 6 of them.&nbsp;

AMS Glass Separation LED RIser

ams riser

br1acc

If you have TPU filament, <a target="_blank" href="https://makerworld.com/en/models/501494" rel="nofollow noopener">try my improved version here</a>.&nbsp;This is a cap that covers the top of the z-axis threaded rods to prevent dust and filament bits from getting in there.2 covers print in roughly 9.5 minutes and uses 1 gram of filament.&nbsp;There is a round cutout so the top of the rod/rubber plug does not rub against the printed cover!Optimized for 0.16mm layer height and 0.4mm nozzle.If printing ASA or ABS, increase the “Max fan speed threshold → Layer time” in Filament Cooling settings to at least 6 seconds.&nbsp;To install, simply snap into place with 2 fingers using a very small amount of force.Easily removable with your fingernail.&nbsp;Due to variances in printing, if you want an absolutely perfect fit - please try printing 4 and choose the best 2.You can also try scaling X/Y/Z by 0.3% - 0.5% in the slicer.&nbsp;

Dust Cover for P1P, P1S, and X1 Z Axis 

upgrades

JabbaTheDuck

This TARDIS dice tower should easily accomadate standard D20 dices and I hope you enjoy it. I had fun making it.

Tardis Dice Tower /w Tray

dice tower

miham_3d

Fast and easy print of fidget keychain.

Fidget keychain

keychain

SprocketStudios

This is a complete redesign of my <a target="_blank" href="https://makerworld.com/en/models/102934#profileId-109616" rel="nofollow noopener">original dragon egg</a>, started over from scratch. It features much more uniform scale position, and no more warnings or wobbly lower layers! The threading is identical to the original profile.&nbsp;There are four different versions of the egg:<ul><li>A large threaded egg with thin walls (for printing as-is or scaling up)</li><li>A large threaded egg with thick walls (for printing as-is or scaling down)</li><li>A small hollow egg (one piece) for printing as-is or scaling up</li><li>A small solid egg (one piece) for printing as-is or scaling down</li></ul>All four designs are included as different plates on one profile.&nbsp;As designed, the large egg will hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a>. However it's a pretty snug fit, if you are making this for a small child who will want to pack it back into the egg you may wish to print the thin-walled egg scaled up a bit. A print profile for this is included - it's the “scaled to 100mm” profile.&nbsp;The threads will line up the design perfectly if printed accurately. Some filaments are a bit “stickier” than others, it may take one or two opening / closing attempts to get it to move smoothly - particularly with silk PLA.&nbsp;If you are printing the threaded version with a dual color / coextruded filament it is crucial that you not rotate the parts at all on the build plate, or else the colors won't line up.

Threaded Dragon Eggs for All Occasions 

dragon

andre.schuiki

This model let you mount your tapo c100 camera to your printer door hinge.

Tapo C100 Camera Holder Bambu P1S

tapo

Maaght

Just a basic led light box template that you can use to add your own design onto the faceplate. Designed to fit this battery powered LED light strip: <a target="_blank" href="https://www.amazon.com/Battery-Powered-Operated-Christmas-Decoration/dp/B0852MD6HV/ref=sr_1_5?crid=ZQ5GUEZ262GO&keywords=coobatg+led+light+strip&qid=1699495713&sprefix=led+light+strip+coobatg%2Caps%2C356&sr=8-5" rel="nofollow noopener">LED Lights</a>

Blank LED Light box Template

Office 

DebClutter

My sister needed hooks that would slide easy and the curtain wouldn&#39;t come off when sliding, so I designed these for her. I did print these in ABS but I think PLA would be fine. We just happen to have the color we needed in ABS.&nbsp;You can print 12 on one plate. I didn&#39;t change anything in the settings for the ABS. It is Bambu Lab&#39;s ABS.

Shower Curtain Hook

hook

AU3D

This container is inspired by the iconic Question Mark Block from Super Mario. Its dimensions are approximately 80x80x80mm, and it can be easily printed without an AMS. The container and external decorations are distinct pieces, assembled through post-processing gluing for a seamless finish. I've incorporated four custom-designed hooks that fit effortlessly into the pegboard. These hooks provide increased stability due to their very tight tolerances, ensuring the holder remains securely in place.<h3>Printing Instructions</h3>To enhance the quality of this print, which exhibits a notably vibrant and generally semi-transparent hue, it is advisable to opt for printing with three perimeters for optimal results.<h3>Skadis Collection</h3>More Super Mario styled container can be found here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/131993" rel="nofollow noopener">Super Mario Pipe Container for IKEA Skadis</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133014" rel="nofollow noopener">Super Mario Brick Container for IKEA Skadis</a></li><li><a target="_blank" href="https://makerworld.com/en/models/132808" rel="nofollow noopener">Super Mario Coin Container for IKEA Skadis</a></li></ul>I am constantly developing more IKEA Skadis attachments. Check out my <a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">IKEA Skadis Collection here</a>.

Super Mario Container / Pencil Holder for IKEA Skadis

desk

redfoxdude

<h3>WDT is an art. Its chaotic nature takes skill to master consistently.</h3><h4>Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate.</h4>In that spirit, this 3D printable tool utilizes a print-in-place planetary gear mechanism to create spirographic needle motion. This is the 54mm version. Looking for the 58mm version? <a target="_blank" href="https://makerworld.com/en/models/169731" rel="nofollow noopener">See here</a>.This design is provided to you for free under a Creative Commons CC-BY-NC-SA license. Make and enjoy, but do not sell. <a target="_blank" href="https://paypal.me/vjapolitzer" rel="nofollow noopener">Like what I'm doing and want to share the love? Buy me a coffee – any donation is much appreciated (paypal.me/vjapolitzer) 😊</a><h4>OnShape Sources</h4>Make it your own! Custom needle depth, tweak tolerances, or remix! Easily export STLs and STEPs. Check out the open source design on OnShape. (Note: when exporting STLs, make sure you select Units→Millimeter and Resolution→Fine.) <a target="_blank" href="https://cad.onshape.com/documents/fdee3216b2ace613c56a762c/w/e1d353faa7a0ef9f00ff14c6/e/7b791a2208f50895265ad90c?configuration=Basket_Lip%3D0.0028%2Bmeter%3BBasket_OD%3D0.0629%2Bmeter%3BCountersunk_Screws%3Dtrue%3BEarTabs%3Dtrue%3BGear_Tolerance%3D2.0E-4%2Bmeter%3BHandle_Diameter%3D0.015%2Bmeter%3BHandle_Height%3D0.0156%2Bmeter%3BLug_Depth%3D0.006%2Bmeter%3BLug_Width%3D0.021%2Bmeter%3BMagnet_Hole%3D0.0032%2Bmeter%3BMagnet_Hole_Depth%3D0.0032%2Bmeter%3BMagnets%3Dfalse%3BNeedleLength%3D0.035%2Bmeter%3BNeedle_Depth%3D0.026000000000000002%2Bmeter%3BNeedle_Handle_Hole%3D0.0018000000000000002%2Bmeter%3BNeedle_Handle_Length%3D0.03%2Bmeter%3BNeedle_Hole%3D0.0011%2Bmeter%3BRotateForPrinting%3Dfalse&renderMode=0&rightPanel=configPanel&uiState=646bc5ee8788051ab5c77615" rel="nofollow noopener">54mm workspace</a>A common problem with many commercially available WDT tools is that they utilize concentric motion, which creates trenches in the coffee. The spirographic pattern avoids needles crossing the same path, with the goal of a more homogeneous particle distribution.I have optimized the needle pattern for even coverage, and no more than 8 rotations of the handle should be necessary. Two different needle lengths provide deep and top of the bed distribution.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_s35ge1zdytro.png"></figure>The needles are inserted from the top and are replaceable, and the base is swappable, allowing for configurable needle depth for different baskets, without needing to change out the needles. Optionally, you can print versions of the base that can house eight magnets and/or include a flange to interface with the portafilter lugs. A little de-bossed label to indicate a given base's depth is included for easier identification.<h3>Instructions</h3><h4>Gather your parts and materials.</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_mvf9bb54h7lm.png"></figure>For the non-printed things, you will need:<ul><li>5x M3 x 12mm flathead/countersunk screws (if you have non-flathead/countersunk screws you would like to use, <a target="_blank" href="https://www.printables.com/model/487808-umikot-no-countersunk-screws-parts-planetary-gear-" rel="nofollow noopener">check out these alternative parts</a>)</li><li>10x 0.35mm acupuncture needles with a 30mm handle (I used the same as the popular 9-prong tool, 0.35x75mm from <a target="_blank" href="https://www.aliexpress.com/item/1005001467649993.html" rel="nofollow noopener">aliexpress</a>)</li><li>Cheap flush-cutters you don't mind dedicating to needle cutting, or even better, a hardened cable cutter</li><li>Screw-driver/Allen-key for the M3 screws</li><li>A 3D printer</li></ul><h4>Print your parts!</h4>I printed mine with PLA. You may want to print the Base part with PETG.Personally, the contact time with the hot basket/portafilter has been short enough that I have not had issues with PLA - however, PETG, with its higher glass transition temperature, would certainly have reduced risk of softening.Settings:<ul><li>0.2mm layers</li><li>4 top/bottom layers</li><li>2 walls are sufficient</li><li>11% gyroid minimum (consider higher for more heft!)</li><li>No supports</li><li>Random z-seam for Upper Mech can help with snagging and improve smoothness [Thanks to zumicroom in EAF]</li></ul>The gears and needle holes require a good calibration (0.2mm XY print-in-place tolerance) and good quality filament!Printed Parts:<ul><li>1x Upper Mech</li><li>1x Spin Ring</li><li>1x Handle (see Handle Options below)</li><li>1x Base (see Base Options below)</li><li>1x Stand (see Stand Options below)</li></ul>Handle OptionsThe Handle is available in Small and Large. Which to use comes down to preference.The pictured Umikot is fitted with a Small, which is good for small hands or those that want a delicate-operation feel (that is my personal preference, but go with what feels good for you!)Base OptionsThe Base part is available in different versions for:<ul><li>Various needle depths</li><li>With or without a flange that interfaces with the portafilter lugs (Lug/NoLug)</li></ul>Pick the needle depth that fits your basket. The filenames include the depth (i.e. Umikot54 - Base 25mm Lug.stl). This is how deep the needles extend below the lip of the basket. See below for some common needle depths.Common 54mm basket needle depths are:<ul><li>Stock Breville/Sage 2-cup single wall basket<ul><li>24mm</li></ul></li><li>IMS 18-22g basket<ul><li>26mm</li></ul></li></ul>Note: For the very best fit, measure the internal depth of your basket. The above are based on specifications and have not all been tested. Please let me know if these recommendations need adjustments!Stand OptionsPrint the corresponding stand, either Lug or NoLug, depending on the base you choose.<h4>Cut the needles to size.</h4>The designed needle depth for the various base files assumes the needle length to be cut precisely. If anything, favor slightly short. You only need to cut to the lengths described below. The base you choose is what adjusts the effective needle depth.The needles are likely harder than the cutting edges of most cheap flush cutters, so be prepared to dedicate them to the cause. I used a very inexpensive one from a multi-pack I got off of Amazon. Even better, use a proper, hardened cable cutter.Be very careful to safely dispose of the cut ends of these needles!First, cut 5 of your 10 needles to a total length of 65mm (35mm needle + 30mm handle):<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_t0of5ilc8689.png"></figure>Cut the remaining 5 needles to a total length of 55mm (25mm needle + 30mm handle):<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_vtabb7grpud9.png"></figure>To secure the needles in their places in the gears, give them a little bend, like in the above photo. This way they won't rattle around, but can still be removed if they ever need to be replaced.<h4>[Optional] “Tap” the gears' screw-holes</h4>This step is optional, particularly if your screw holes are quite tight. To make our lives a bit easier later, “tap” the holes with one of your M3 screws. Carefully screw them into each of the gears' holes, stopping when you feel the resistance noticeably increase (you've hit the bottom) and then remove the screw. Repeat for each of the 4 larger gears. You will need to hold the gears carefully to keep them from rotating while you do this. Be careful you do not get pinched!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_chfcy84mx2jx.png"></figure><h4>Attach your base</h4>Screw on your chosen base. You can change bases at any time, but be very careful when doing so when the needles are installed!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_4om806bgligu.png"></figure><h4>Insert the needles!</h4>Be careful during this step - the trimmed needles are still thin and sharp! Place the assembly onto its stand at this point to keep the tips in a safe place. Gently insert each needle until it sits flush with the top of the gear. Do not force them! Give them a little jiggle if they are not quite lining up with the hole in the bottom.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_anxv83fnaxt1.png"></figure>See below for the needle pattern with respect to the different needle lengths:<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_cl05t9q0hhbt.png"></figure><h4>Attach the spin ring and handle</h4>Gently screw in 4 of the M3 screws to attach the spin ring. Fully tighten until they stop (the mechanism should be locked). Then back out 1 turn, which will align the gears vertically to the outer ring gear.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_irwb5pyhbrax.png"></figure>Then, do the same for the handle, but only back out ~¼ turn:<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_h07uqlmsvpls.png"></figure><h4>Distribute some coffee!</h4>And that is it! If you chose the NoMagnet NoLug base or the Magnet NoLug base but your basket isn't very magnetic, you will need to hold Umikot down while turning the mechanism. Gently give it several rotations. At least 8 gives the pattern nearly full coverage, but I like to do as many as 12 - whatever gives you the best results!The distribution must be done with the basket in a level position - otherwise, the grounds will tend towards whichever direction the basket is tilted.Finally, remove Umikot, give the portafilter a tap to settle the grounds, tamp, pull, and enjoy your espresso!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/643829/2024-02-04_1gib3cv9d051.png"></figure>Disclaimer: not all filaments, nor the 3D-printing process, are certified food safe. Use of this tool is at your own discretion. <a target="_blank" href="https://ko-fi.com/redfoxdude" rel="nofollow noopener">Like what I'm doing and want to share the love? I always appreciate any support on Ko-Fi 😊</a>

Umikot (54mm Version) - Planetary Gear Spirograph Espresso WDT Tool

coffee

waveman

*** AMS? Check out the <a target="_blank" href="https://makerworld.com/en/models/31328#profileId-27875" rel="nofollow noopener">two-color version</a> of this model! ***&nbsp;Infinity cube with strong hinges that won&#39;t break easily. This cube is designed with a lot of slack, so that it moves freely.&nbsp;I designed this after having several fails with other models, where the hinges would break when trying to loosen them after printing. Hopefully, this design will print well for everyone!&nbsp;These models and openscad source file can also be downloaded from <a target="_blank" href="https://github.com/jhpieper/sturdy-infinity-cube" rel="nofollow noopener">https://github.com/jhpieper/sturdy-infinity-cube</a><h3>Post-Printing</h3>The hinges should bent quite easily after printing, with the hinges on the front and back side being more tight due to the orientation. Just work the cube a few times and everything should be quite loose.<h3>Cube Sizes</h3>It is best to not scale the model, as it messes with the spacing in the hinges. Instead, check out these other models optimized for their size:<ul><li><a target="_blank" href="https://makerworld.com/en/models/36109#profileId-33936" rel="nofollow noopener">16: S</a></li><li>20: M -- try this first! This is the most common size.</li><li><a target="_blank" href="https://makerworld.com/en/models/36113#profileId-33940" rel="nofollow noopener">24: L</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36115#profileId-33943" rel="nofollow noopener">30: XL</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36116#profileId-33945" rel="nofollow noopener">36: XXL</a></li></ul><h3>Other Versions</h3><a target="_blank" href="https://makerworld.com/en/models/41416#profileId-41687" rel="nofollow noopener">Halloween Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_f2f98325d3a09.jpg">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/31328#profileId-27875" rel="nofollow noopener">Two-faced Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_599e03246b88.png">

Sturdy Infinity Cube

<h3>Key Advantages</h3><ul><li>Only 7g of filament per ring.</li><li>Compatible spool brand name impressed.</li><li>Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.</li><li>Rounded contour lowers the chance of damaging plastic storage bags.</li><li>Flat variant for full AMS compatibility (see tolerance and compatibility section)</li></ul><h3>Update:</h3>25.03.2024: Based on user feedback, I added an updated version of the 199mm flat and rounded variant which are tighter than the original model. I did not replace the original print profile but rather added a new one with the addendum ‘tighter’. They have a very tight fit and need some stretching to put on.<h3>Description</h3>This isn&#39;t merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters.&nbsp;This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!<h3>Tolerances</h3>Compared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process (up to +/-2mm). Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model&#39;s scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the &#34;uniform scale&#34; option before proceeding. If your spool&#39;s diameter exceeds the default setting, consider increasing the scale by 1%. Conversely, if your spool&#39;s diameter is smaller, reduce the scale by 1%, and your setup should be ready for use.<h3>Compatibilty</h3>eSun Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the rounded 200mm adapter, they surpass Bambu Labs’ specifications. The rounded 199mm adapter techinically fits but there is always a chance that your spool is ever so slightly larger than 199mm causing the adapter to expand and surpassing the specs. Consequently, users have a couple of options to address this:<ul><li>AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.</li><li>Custom Backside Rollers: Alternatively, consider implementing custom backside rollers specifically designed to support these larger rolls.</li><li>For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.</li></ul>For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.<h3>Printing</h3>When it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.<h3>Other Filament Brands</h3>This adapter is available for other brand&#39;s cardboard spools (<a target="_blank" href="https://makerworld.com/en/@AU3D/collections/565167" rel="nofollow noopener">Link to Collection</a>):<ul><li><a target="_blank" href="https://makerworld.com/en/models/251717" rel="nofollow noopener">3DGenius</a></li><li><a target="_blank" href="https://makerworld.com/en/models/233956" rel="nofollow noopener">3DHojor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197741" rel="nofollow noopener">Aceaddity</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197938" rel="nofollow noopener">ANYCUBIC</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197839" rel="nofollow noopener">ATA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377775" rel="nofollow noopener">Bblife</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254552" rel="nofollow noopener">Colorful</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192941" rel="nofollow noopener">Comgrow</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492894" rel="nofollow noopener">Copymaster 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192757" rel="nofollow noopener">Creality</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253694" rel="nofollow noopener">CUIEED</a></li><li><a target="_blank" href="https://makerworld.com/en/models/251342" rel="nofollow noopener">Dikale</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376740" rel="nofollow noopener">DO3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237701" rel="nofollow noopener">Duramic 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180213" rel="nofollow noopener">Elegoo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194714" rel="nofollow noopener">ENISINA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/456459" rel="nofollow noopener">Eono</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175447" rel="nofollow noopener">Eryone</a> / <a target="_blank" href="https://makerworld.com/en/models/372282" rel="nofollow noopener">Eryone 2024+</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180253" rel="nofollow noopener">eSun</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246501" rel="nofollow noopener">Filafarm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377992" rel="nofollow noopener">Firos</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376304" rel="nofollow noopener">Flashforge</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196175" rel="nofollow noopener">FormFutura</a></li><li><a target="_blank" href="https://makerworld.com/en/models/505839" rel="nofollow noopener">Gembird</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375168" rel="nofollow noopener">GNVTNTP</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192804" rel="nofollow noopener">GratKit</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246162" rel="nofollow noopener">Grauts</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253905" rel="nofollow noopener">Inland</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254313" rel="nofollow noopener">IWEColor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192773" rel="nofollow noopener">JAMG HE Conjure</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175622" rel="nofollow noopener">Jayo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/176924" rel="nofollow noopener">Kexcelled</a></li><li><a target="_blank" href="https://makerworld.com/en/models/489368" rel="nofollow noopener">Kingroon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375526" rel="nofollow noopener">Kinluot</a></li><li><a target="_blank" href="https://makerworld.com/en/models/249610" rel="nofollow noopener">Kretrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/252594" rel="nofollow noopener">Lovoon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376013" rel="nofollow noopener">Mchyi</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245976" rel="nofollow noopener">Meltbro</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253497" rel="nofollow noopener">MKOEM</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194179" rel="nofollow noopener">Ninetec</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245837" rel="nofollow noopener">OEM Mika3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175704" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237378" rel="nofollow noopener">OVV3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/177047" rel="nofollow noopener">Polymaker</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254827" rel="nofollow noopener">Protopasta</a></li><li><a target="_blank" href="https://makerworld.com/en/models/239790" rel="nofollow noopener">R3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238604" rel="nofollow noopener">Raise3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206466" rel="nofollow noopener">Redline Filament</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234098" rel="nofollow noopener">Reprapper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492951" rel="nofollow noopener">Prima Creator</a></li><li><a target="_blank" href="https://makerworld.com/en/models/193658" rel="nofollow noopener">Prindano</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196488" rel="nofollow noopener">SainSmart</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194367" rel="nofollow noopener">Sovol</a></li><li><a target="_blank" href="https://makerworld.com/en/models/242422" rel="nofollow noopener">Spectrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/235861" rel="nofollow noopener">Sunlu Elite Series</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194269" rel="nofollow noopener">Tinmorry</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206360" rel="nofollow noopener">Tronxy</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238095" rel="nofollow noopener">TTYT3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194520" rel="nofollow noopener">Two Trees</a></li><li><a target="_blank" href="https://makerworld.com/en/models/236118" rel="nofollow noopener">Yousu</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234380" rel="nofollow noopener">YOYI YOYI</a></li></ul>

POLYMAKER Cardboard Spool Adapter

TrocheHole

<figure class="table" style="width: 100%"><table style="background-color: #f5f5f5; border: 12px solid #f5f5f5"><tbody><tr><td><figure class="image image-style-side"><a href="https://makerworld.com/models/459303" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-05-10_145eb9783fdb7.jpg"></a></figure><h3>[Information]</h3>The LID model designed specifically for the basket has also been released for this &#34;Purge Chute &amp; Basket&#34; model.<h3><a target="_blank" href="https://makerworld.com/models/459303" rel="nofollow noopener">Visit this link to download.</a></h3></td></tr></tbody></table></figure>&nbsp;<h2>Description</h2>The magnetic Chute &amp; detachable Basket for the poop purged from the X1C, P1S, and P1P.Both the Chute and Basket are easily detachable, but they are also securely attached to prevent accidental movement.The use of the Fixture (the light gray part in the photo) is strongly recommended, as it is very effective in preventing the Chute from shifting.Please also check the photos and print profile for additional information.&nbsp;&nbsp;<figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg"></a></figure><figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg"></a></figure>──────────<h2>Update</h2><h4>[ June 14, 2024 ]</h4><ol><li>“Fixture2”, which allows stable installation of the Chute without magnets, has been added. (*It can also be used with magnets.)</li><li>As requested, the “Extra-Short” size basket has been added.  </li></ol><h4>[ April 7, 2024 ]</h4>New sizes have been added to the basket model.<ul><li>Short</li><li>Medium (*original size)</li><li>Long</li><li>Wide</li></ul>──────────&nbsp;<h2>Printing Tips</h2>No supports are needed. But, the overhang angles of the Chute and Basket are 30 degrees.If you are using a filament that is NOT good at printing overhangs, please enable support settings yourself.&nbsp;<h2>Compatible Magnet Types (for the Chute)</h2><ul><li>DIA 13mm x T 2.5mm</li><li>DIA 12mm x T 3mm</li><li>DIA 12mm x T 2mm</li><li>DIA 10mm x T 3mm</li><li>DIA 10mm x T 2mm</li><li>DIA 8mm x T 3mm</li><li>DIA 8mm x T 2mm</li><li>DIA 6mm x T 3mm</li><li>DIA 6mm x T 2mm</li><li>No Magnets</li></ul>&nbsp;