Flawless print! Love the way it came out. Used Marble Grey PLA+ for extra durability and it looks super great on the counter. Thanks for uploading this one!

Really great model that printed out flawlessly. Used Marble Grey PLA+ and I love the way it came out. The stand definitely fits a range of various sizes/styles of headphones (as seen in my pictures) so I'm more than satisfied with it. Thanks for sharing this one! 🙌

Love how this desk organizer came out. Used Marble PLA+ for the base. The short and tall modules were printed with two shades of red matte PLA (Bambu Lab Terracotta and SUNLU Red) and then Bambu Lab basic black was used for the medium height modules. Definitely will be helpful in my new office setup. Thanks for sharing this model 🙌

My wife misplaced her phone case and we didn't want to buy yet another one immediately so I came here and found a couple of solid options, with this being the most appealing. It printed really well and looks nice in beige PLA+. Seems durable, although I'd probably print it in TPU next time so it's a bit more grippy. Overall a pretty solid phone case. Thanks for sharing this model 🙌

Great model that came out pretty flawless! (I adjusted the speed twice and got some chunky layer lines but that's my fault for sure). Printed both the cover and stand in PLA+ for strength. I chose a neutral beige color so we could find it easier if it's dropped while at the same time, it won't clash with our existing decor. Thanks for uploadin this one. It's super practical and still looks great. 😊

For over a decade I've used a Pelican Micro case for the storage of my.. ummm, storage. I kept all the plastic from the packaging whenever I got new SDs or Micro SDs and that's what I would keep them in inside of the Pelican case. It was overkill (I didn't need the waterproof/float features), underwhelming and chaotic. Now everything fits perfectly (snugly!) in a case around half the size and I couldn't be more stoked. I printed it in Duramic Marble Grey PLA+ and the hinges are super tough.. like surprisingly strong. I also happened to have a whole set of M2 screws that I bought accidently instead of M3 on Amazon, so that ended up being super helpful for this print 😂. Now I just need something similar for all my audio cable adapters and my random USB-A, & USB-C dongles! Thanks for uploading this model 🙌

Pretty easy print with really solid structure. Definitely a straight-forward install process as well. Always hated the fact the spool holder was in the back as it was tough to access and now that's no longer an issue! Printed it in Elegoo Matte Navy Blue PLA and while I maybeeee should have used PLA+ or PETG for strength, it still feels super solid so I'm not too concerned. Great model, thanks for sharing!

Love this model and how this print came out. I've personally used a Carpio since they launched back in 2020 and I think it absolutely helped reduce tension and strain in my wrist over the years. That being said, the pads never fit on the base properly causing me to lose them every so often 😂. I know I could have glued them in but of course I never did. When I saw this model I immediately wanted to print it for my wife. I've been using matte tones including this marble blue PLA from Polymaker for some of her desk accessories so I used for the base and then I used Mellow Yellow Bambu Lab Translucent PLA for the pads. It's somewhat unconventional but I really dig the combo, especially since the colors are both muted tones of primary colors. Anyway, seeing how it came out, now I want to print another for myself, possibly with TPU pads (I've got a roll or two but I'm currently still a TPU printing virgin...). Thanks for sharing! 🙌

Second time printing this set, this time for myself as the last print was a gift. Both sets printed out flawlessly This was printed using Bambu Lab Matte Charcoal (Black) and Matte Terracotta (Red) PLA. I really dig the modern, yet still retro look of the geometric faceted pattern that is on both the containers and the base. Right now it's got a bunch of random printer-related things in it but my intentions were to use it on my nightstand for all the odds and ends that tend to collect over time. Thanks for sharing this one! 🔥🔥🔥

I've been eyeing this model since I got my P1S over the summer. I finally printed it because I got a new laptop and I wanted to make sure it had a nice spot to hang out. Everything printed flawlessly 👏. I used Bambu Lab Matte PLA in Charcoal (Black) and Terracotta (Red) and I think it looks pretty dope! I'm thinking about gluing the inserts in because both are pretty loose to the point they sometimes come out with whatever is in the slots (I have a small notebook in the second slot currently) But really, I love the fact that I can switch it up whenever I want so maybe I'll just leave it unglued for now. 🤔 Anyway, I seriously appreciate this model. Thanks for sharing!

Printed in Bambu Lab Translucent PETG and it's working out great. Love being able to use up some otherwise dead space! I initially used Matte PLA and it broke while putting it on (definitely my own doing as I forced it pretty aggressively while the print was still cooling down). Would love to see something similar using the two screws on top of the door somehow but I don't know for sure if that would be as useful. Either way, definitely a great model and I seriously appreciate the upload! 🙌

Love how this came out! Printed flawlessly and looks beautiful in Tri-Color Translucent PLA. Thanks for sharing this model! 🙌

Beautiful model, flawless print. Love how it looks with a blue tealight and Tri-Color translucent PLA. Thanks for sharing! 🙌

Amazing model! Printed out flawlessly after some build plate issues (of my own making 🫠) and was pretty simple to assemble. Used Polymaker Dual-Gradient Wood PLA for the barrel as well as Bambu and SUNLU PLA for the other colors. Giving this to my sister for Christmas as our initials are DK and we've always loved Donkey Kong so I have a feeling she's going to appreciate it. Thanks for sharing this one 👏

Amazing lamp! Printed using 3DHOJOR Tri-Color Blue/Green/Yellow Translucent PLA with Bambu Lab Bronze PLA for the base/legs. I had an AMS issue (cardboard spool problems) 6 hours into the print but was able to successfully complete the lamp with no problem. Thanks for sharing this beautiful model! 👏

Amazing! Will make a grate gift for the in-laws! Was honestly amazed if printed out perfectly on the first go. Only adjustments I had to make were to flip it 180 degrees so the face was down on the build plate. Thanks for sharing this one!

Amazing model that printed out perfectly. Used 3DHOJOR Tri-Color (Blue/Green/Yellow) Translucent PLA and I love the way it came out. 🤩 Looks great both with and without the tealight on. I actually put a blue LED tealight in there so it's like double the blue action. I dig it! Will be gifting this one to a family member but j might have to print another for myself. Thanks for sharing 👏

Was looking to buy new glasses and wanted to check on my pupilary distance. The online web-apps are clunky and weird so I immediately came here to see if I could find a model to print. I'm kind of surprised this was the only model I could find (if I'm not mistaken) but I'm glad I found it. Printed out really nicely, even using PLA with a .4mm nozzle (although I'm sure smaller would work even better for the text). Seems to be pretty accurate too! Thanks for uploading! 🙌

LOVE this lamp. It printed flawlessly using Bambo Basic White PLA and Elegoo Matte Black PLA and looks amazing with an RBG LED puck light (off-brand multicolor variation of the Bambu LED kit). I'm able to cycle through various colors with the remote and each color gets evenly diffused throughout the fixture. Definitely my favorite lamp that I've printed so far (and I've printed probably a dozen or so models for personal use, lol). It feels like the perfect mix of Art Deco, Mid-Century Modern and Brutalist design styles. Will likely print some more for gifts in the future! Thanks for sharing. 👏

Pretty flawless print. Love that the model uses a small piece of filament for the hinge. Used Bambu Silk Silver PLA with a "water ripple" effect plate to make it pop a bit more. Probably don't need to print another anytime soon (unless I get a new printer 🤔) but I'm not ruling out printing alternates in other colors. Great model, thanks for uploading!