Print came out well, one thing I noticed is the screw holes arent quite beveled enough to let the screws fit flush, tried it on two different prints and had no consistent success. I am going to get the weight right and then just epoxy or super glue the bottom without screws, as that cover over the weight slots fits perfectly and flush. Added a super stroke grip to it and a nice golf shaft, currently letting a friend test it out.

Made a bunch of these for a friends kid's hockey team scaled down to fit the Bauer mini sticks. I also adjusted the name plate size to fit without having to glue it in place.

Came out great on my H2D!

I have made 15 of these for friends, they work great! This one was printed in PETG-CF.

Made one to go in my AMS-HT to use with activated alumina beads, works great!

Printed another one of these after I bought a set of coated .04 and .06 nozzles for my two H2D printers. Added magnets to it again as a way to hold in the nobles even more securely.

Fits perfectly on our bi-fold bathroom closet doors! No more towels trying to be hung up on the small wood handles that they have.

Printed this to replace a different unit we had installed, this one fits a wider/larger roll that my wife recently switched to. I did it at 80% infill to give it more weight and sturdiness as I felt like the roll part was a bit flimsy (to me but maybe not others) and it cam out great.

Printed this out for a friend in black ASA so that it will last against UV in the back of his truck and still be durable when in use in the winter. Cam out great, just waiting for the parts to arrive to complete it.

Printed with a .6 diameter nozzle using PETG-CF black filament, looks great with no layer lines!

They work great, fit 99% of the rolls I have, Creality rolls seem to have thinner side walls so they dont work as well.

Printed in Bambu Labs PETG-HF (black) and they came out perfectly. Made 50 of them for my nephew who has a mess of a toolbox. :)

perfect solution for spools when they are close to being empty and they jump around inside the AMS2. I use a ball bearing inside each one, they roll much easier and its one weight vs doing AA batteries.

Simple but effective print to identify what AMS goes where.

Works way better than one my wife got at the store, fits perfectly! Printed in PLA.

This is a great print, I am doing two more for friends who have seen the results of this first one. Printed in SunLu PLA 2.0+ on my Bambu Labs H2D. I used Meuvcol superglue for plastic to bond the three sections together, worked great and is solid. I then used Rub-n-Buff paste in silver/pewter to get the base metal style, then I used some glass black Rustoleum spray paint to add small drops/spots on it to resemble wear/pitting, then hit it with a Rustoleum clear coat to protect it all long term. I know a lot of people simply buy silver paint/black paint, primer theirs up and then spray it entirely, but I felt the coating was better done by hand so that it wasn't even and had a lot of variation.

Great print to add to my wife's Thanksgiving decorations!

Great print to add to my wife's Xmas decorations!