rbb428

ramorimdias

Hey everyone,So, I stumbled upon a similar print online, but honestly, I wasn&#39;t totally happy with the quality. That&#39;s why I decided to start from scratch and do it all over again myself. I took the FireRed/LeafGreen Gameboy sprites for the Gen 1 Pokémon and gave them my own twist. I&#39;m planning to do the same thing with other Poké Balls, like the Great Ball <a target="_blank" href="https://makerworld.com/en/models/463234#profileId-371724" rel="nofollow noopener">https://makerworld.com/en/models/463234#profileId-371724</a> and the Ultra Ball <a target="_blank" href="https://makerworld.com/en/models/467011#profileId-376033" rel="nofollow noopener">https://makerworld.com/en/models/467011#profileId-376033</a> for the next gen Pokémons. Hope you like it!This version uses AMS with three colors.&nbsp;There is also a version with manual color change at layer height. That way, those of you without an AMS can still print it (or if you&#39;re into saving filament, as it&#39;ll only need two color changes).&nbsp;Edit:15-05-24To get a smoother top black surface, you need to activate “interface shells” that is hidden by default. You need to enable develop mode on preferences:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000461511/design/2024-05-15_c00e1d5496ee7.png"> &nbsp;After enabling this setting, you&#39;ll have a complete solid layer just before the Pokémon silhouettes! &nbsp;Spoiler:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000461511/design/2024-05-17_15946060ee8bb.png"></figure>&nbsp;Doing this cheatsheet I realized that is a unknown sillhouette on the bottom left that I could&#39;nt figure out. Maybe an error while extracting the sprites… &nbsp;

Pokeball Who's that Pokémon Gen 1 Frame

动漫

Bamingo Design

<ul><li>🌜💫 Imagine every time you set down your drink, you&#39;re looking at the starry sky through Van Gogh&#39;s eyes.</li></ul>Starry Night Coaster: A Glimpse into the Stars<ul><li>🎨 Stunning Sight: Our Starry Night Coasters feature a detailed and intricate design of stars, inspired by the famous painting “The Starry Night” by Vincent van Gogh.</li><li>👶 Easy to Print: No need for (AMS) or (MMU). Only three manual filament swaps are needed to complete the model.</li></ul>Technical Specifications:<ul><li>📏 Size:<ul><li>Diameter: 10 cm</li></ul></li><li>🔧 Print Settings:<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li></ul></li><li>🌈 Color Changes:<ul><li>Start with Black</li><li>At layer #15 (1.28 mm), change to Blue</li><li>At layer #20 (1.68 mm), change to Yellow</li><li>At layer #28 (2.32 mm), change to White for the rest.</li></ul></li><li>📋 Assembly and Usage Tips:<ul><li>Alternatively, use our ready-to-print 3MF file—it automates these steps.</li><li>The files are available in STL, Prusa 3MF, and Bambu Lab 3MF file formats.</li></ul></li></ul>Explore More Designs:<ul><li>Dive deeper into our collection of nature-inspired coasters for more designs that capture the beauty of the natural world:<ul><li>🌊 <a target="_blank" href="https://makerworld.com/en/models/25169#profileId-21943" rel="nofollow noopener">Wave Coasters</a></li><li>⛰️ <a target="_blank" href="https://makerworld.com/en/models/30652#profileId-27193" rel="nofollow noopener">Mountain Coasters</a></li><li>❄️ <a target="_blank" href="https://makerworld.com/en/models/84832#profileId-90731" rel="nofollow noopener">Snowflake Coasters</a></li></ul></li></ul>Licensing Information:<ul><li>These designs are for personal use only. To access them for commercial purposes and enjoy exclusive benefits, consider joining our Memberships at <a target="_blank" href="https://www.printables.com/@BamingoDesign#join:397" rel="nofollow noopener">Printables Memberships</a>.</li></ul>Stay Connected:<ul><li>Be the first to know about our newest designs by following us on Twitter and Instagram. Find all our social media links and more at <a target="_blank" href="http://bamingodesign.com/" rel="nofollow noopener">bamingodesign.com</a>.</li><li>We&#39;re excited to see your creations! Tag us when sharing photos of your prints and connect with us. Your feedback and requests are always welcome. 💛</li></ul>

Starry Night Coaster - Hueforge

coaster

JamesThePrinter

Take chess with you wherever you go with this MakerWorld exclusive!<figure class="image image_resized" style="width:31.46%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443923/design/2024-04-26_e80da61064c23.gif"></figure>This travel chess set includes all of your chess pieces, a board and storage area. Because the chess pieces are small and detailed, a small nozzle is required for the chess pieces!As a bonus, I have also included checkers in this set.<figure class="image image_resized" style="width:31.1%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443923/design/2024-04-26_dfa599f3ea1ca.jpg"></figure><h3>Print Settings</h3><ul><li>Chess Pieces<ul><li>0.2mm nozzle required</li><li>designed to use 0.1mm layer height</li></ul></li><li>Checkers<ul><li>0.2mm nozzle recommended, but not required</li></ul></li><li>Board &amp; Case<ul><li>Nozzle size doesn&#39;t matter - I included print profiles for 0.2mm and 0.4mm nozzle sizes<ul><li>0.2mm nozzle - Allows you to keep the same nozzle installed, but the prints take longer</li><li>0.4mm nozzle - Forces a nozzle change, but drastically lowers print time</li></ul></li></ul></li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Dark Brown PLA</li><li>Bambu Lab Matte Brown Latte PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Basic Ivory White PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li></ul>

Travel Chess Set

玩具

Calzune

<h2>This is a 3 part silhouette box to hang on the wall or place on a desk etc.</h2>Dimensions: 234*234x48mm<ul><li>The box needs support on the two holes show like the picture below</li><li>The box fits on a 256mm plate but you need to adjust the placement manually, I placed it on: X 125.80 Y130.66 Z 24.22</li><li>I printed it at 0.2mm layerheight.</li></ul>For my print I used: <ul><li>SUNLU Pla+ ORANGE</li><li>ELEGOO Pla BLACK</li><li>Esun Pla-lite RED</li></ul><h4>I hope you like it! =)</h4><img src="https://makerworld.bblmw.com/makerworld/draft/583825/2024-02-24_1dc0ba2bb5563.jpg">

Dragonball Silhouette Box (NO AMS NEEDED)

龙珠

Zurlingo-3D

Christmas Puzzle Gift Box *Extreme Edition*&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/sp7ZSfbfw7A?si=MVZSIp2eIlWSBcrE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sp7ZSfbfw7A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>A locked lid</li><li>A hidden key and bolt locking system with an additional 20 hidden screws to securely hold the lid in place</li><li>3 Different screw types</li><li>3 Different screw drivers</li><li>Secret compartments to hide the screw drivers</li><li>Super strong lock (Box will not open without removing the bolt and all screws)</li><li>Print in multiple colours without AMS</li><li>Fun for kids</li><li>Secret storage</li><li>Reusable</li><li>Tolerance test included. This is to ensure all parts will fit before committing to a long print.</li></ul>This Christmas puzzle box is a great addition to anyone's Christmas day!&nbsp;Fill it with sweets or gifts and give your kids the challenge of figuring out how to open the lid!&nbsp;You need to print the following parts for a full puzzle box:<ol><li>Box</li><li>Lid</li><li>Side ribbon strip x 4</li><li>Hidden ribbon strips x 3</li><li>Top ribbon strips</li><li>Key</li><li>Bolt</li><li>Bolt Cap</li><li>Key Cap</li><li>20 Screws</li><li>3 Screw Drivers</li></ol>All parts are easy to print and fit together easily with generous tolerances.&nbsp;Assembly:&nbsp;<ul><li>Tilt the box on its side</li><li>Put the lid on</li><li>Insert all 20 screws on all 4 sides of the box</li><li>Gently slide a side ribbon strip into the track.</li><li>Keep sliding until it meets the stop.</li><li>Repeat this on all 4 sides.</li><li>Insert the drivers into the recessed holes at the 3 corners</li><li>Slide the hidden ribbon strips in place to cover the holes/drivers</li><li>Locate the bolt through the hole in the box and into the threads in the lid. (Start by hand)</li><li>Turn the bolt all the way in with the key</li><li>Cover the bolt with the bolt cap</li><li>Put the key into it's secret compartment</li><li>Cover the key with the key cap.</li></ul>&nbsp;Usage:&nbsp;<ol><li>Take off the caps (Key cap is deliberately tricky - Bolt cap can be popped out by squeezing the box)</li><li>Tap the box on your hand or a hard surface to release the key (if it hasn't already fallen out)</li><li>Use the key to unscrew the bolt enough to get a grip with your fingers.</li><li>Remove the bolt entirely and place to one side.</li><li>Remove the hidden ribbon strips</li><li>Remove the 3 screw drivers</li><li>Remove all 20 screws on all 4 sides of the box</li><li>Open the lid!</li></ol>I have included a tolerance test in the model files and pre sliced profile. This is purely if you are trying to scale up or down and want to check tolerances of all parts. It can also be used to check that you printer is dialled in properly before committing to the full box print.&nbsp;Print Settings:&nbsp;Nozzle: 0.4mmInfill: 12% GyroidLayer Height: 0.2mmSupport: NonePerimeters: 5Top/bottom Layers: 5&nbsp;This will make everything pretty solid with minimal infill being used.&nbsp;Tip: If you find that the side ribbon strips and/or the screws are tight, then print them at 0.12 layer height. This should give a little more tolerance between the sliding and interlocking parts.&nbsp;Thanks for looking!&nbsp;Please don't forget to post pictures of your makes :)&nbsp;EDIT:Check out my latest gift box LIVE on my profile now! :P(Tap The Picture)<a target="_blank" href="https://makerworld.com/en/models/102875#profileId-109543" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/295270/2023-12-22_b9dc197ca3d78.png"></a>

Puzzle Gift Box *Extreme Edition*

gift

DarkSword Creations

<h3>Update 1.8.1 - 1.9</h3><ul><li>Added: Windows(Unicorn Stars), Cap(Castle), Cap(Astro)</li><li>various fixes</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-03-07_0287a77b038de.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-03-04_29733d4baccc5.png"></figure><h2>Darksword Modular Fantasy Lantern</h2>  <h2>Concept</h2>Hello! this is my last work, let me introduce my concept of modular lanterni make props and lights for larp from many years, but usually my works are standalone creations, so I thought “how can i make something that can be easy to assemble, easy to swap between different pieces like, electronics, aesthetics, features etc..”and here we go!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-02-13_a073dc145efc8.png"></figure>&nbsp;this lantern is splitted in:<ul><li>Inner Structure: The core part where all pieces are assembled</li><li>Cap: like the name suggest, is the top part</li><li>Bottom: this is the part where you can find the light source electronics (or different lights will come in the future)</li><li>Bottom Cap: is the cover of the bottom part and holds the light source</li><li>Skin: is the Themed aesthetics around the main part</li><li>Windows: the transparent part where the light passes through</li></ul><h3> </h3><h2>Skins</h2>The Themed aesthetics of this lantern are the Skin and the Cap parts, so for example, if you want to print a rusted themed aesthetics, you need to print “Cap(Rusted)” and “Skin(Rusted)”. of course you can mix every part of this lantern as you wish.you can put a rusted piece on a bone piece etc… etc..&nbsp;look at this example<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-02-13_44853afeb99b7.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-03-05_85bf8df369abc.png"></figure><h2>Printing Instructions</h2>after several tests, i made the profile with some customizations for the best results.every skin is scaled to 100,50% for better fitting, some supports are manually generated for easy removing and avoid useless supports.feel free to give me some feedbacks, i have printed every piece serveral times but, due to long print time, i can't test every single customization i made every time. so sorry if something goes wrong, i do my best ç_ç  Windows need to be printed with clear filament (i used white color in the profile)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-02-13_11398998998b2.png"></figure>disclaimer: the bone skin and bamboo skins are full of supports and need a lot of patience to remove everything. i suggest using a scraper<h2>Light Source</h2>You can choose different light sources:<ul><li>Led Kit 001</li><li>Lipo Electronics</li></ul>if you want more light sources just send me some requests&nbsp;for Led Kit 001 you need:Bambulab Led Kit 001 from <a target="_blank" href="https://store.bambulab.com/products/led-lamp-kit-001?skr=yes" rel="nofollow noopener">Here</a>&nbsp;for Lipo Electronics you need:&nbsp;Product links are only for reference, you can find the same products cheaper on other sites1x: tp4056 recharge module <a target="_blank" href="https://www.amazon.it/Interfaccia-tipo-C-Regolatore-Carica-RUIZHI/dp/B0CN96Z31M/ref=sr_1_1_sspa?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=27BJSFY4MBOF4&keywords=tp+4056&qid=1707826947&sprefix=tp+4056%2Caps%2C110&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1" rel="nofollow noopener">Amazon</a>1x: 3.7V Li-ion 502030 Battery 250mAh Lipo (W20.5mm, H5.3mm, L32mm) <a target="_blank" href="https://www.amazon.it/dp/B08FD3V6TF?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">Amazon</a>1x: usb type-c female socket (ROUND 12mm hole diameter) <a target="_blank" href="https://www.amazon.it/RUNCCI-YUN-montaggio-pannello-connettore-impermeabile/dp/B0CDC1X4BY/ref=sr_1_2?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=319C99PA9OHEL&keywords=usb+tipo+c+femmina+socket+pannello+incastro&qid=1707826901&sprefix=usb+tipo+c+femmina+socket+pannello+incastro%2Caps%2C97&sr=8-2" rel="nofollow noopener">Amazon</a>1x: Self-locking button switch (ROUND 10mm hole diameter) <a target="_blank" href="https://www.amazon.it/Microinterruttori-Microinterruttore-miniaturizzato-autobloccante-alimentazione/dp/B0CTCK52X4/ref=sr_1_22?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2PAN0EECS4E22&keywords=pulsante+self+locking+10mm&qid=1707826548&sprefix=pulsante+self+locking+10mm%2Caps%2C95&sr=8-22" rel="nofollow noopener">Amazon</a>1x: Usb type-b female socket (10mmx21mm hole) <a target="_blank" href="https://www.amazon.it/Greluma-connettore-femmina-fibbia-scanalatura/dp/B0C6D74RVX/ref=sr_1_9?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=11XXOQNVSV7YH&keywords=usb+tipo+b+femmina+socket+pannello&qid=1707826698&sprefix=usb+tipo+b+femmina+socket+pannello%2Caps%2C98&sr=8-9" rel="nofollow noopener">Amazon</a>1x: Usb led light <a target="_blank" href="https://www.amazon.it/Lampadina-Ricaricabile-Decorazioni-Halloween-Lanterna/dp/B0CL4LLQF1/ref=sr_1_6?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=17BJGCE1Z3VUC&keywords=usb+effetto+fiamma&qid=1707827109&s=kitchen&sprefix=usb+effetto+fiamma%2Ckitchen%2C96&sr=1-6" rel="nofollow noopener">Amazon</a>Soldering irona Welder<img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-03-04_033b8787ca003.png">Follow the tp4056 schematics for the wires<img src="https://makerworld.bblmw.com/makerworld/draft/656798/2024-03-04_e0a79c60abf0c.png">&nbsp;<h2>Assembly Instructions</h2><ul><li>You need: 18x (2,5x10mm) screws (you can adapt 3mm screws but you will get the best result with 2,5mm ones)</li><li>if you want to put the hook, you can use a 3,5mm screw one</li></ul>&nbsp;Bottom(Led Kit 001) Assembly (how to video <a target="_blank" href="https://youtu.be/kRPdHQHpsv0" rel="nofollow noopener">Here</a>)<ol><li>Insert the Led Kit 001 in the Bottom Cap(Led Kit 001)</li><li>Insert the Cable in the hole of Bottom(Led Kit 001)</li><li>put the Bottom cap on the Bottom with screws</li><li>insert Windows in the Inner Structure</li><li>put the Inner Structure inside the Skin</li><li>put the Cap and screws</li><li>put the Bottom with screws</li><li>Enjoy!</li></ol>Bottom(Lipo) Assembly (how to video <a target="_blank" href="https://youtu.be/_wpkyHPngJY?feature=shared" rel="nofollow noopener">Here</a>)<ol><li>assembly all the Bottom(Lipo) electronics part and put the Bottom Cap(USB) with screws</li><li>insert Windows in the Inner Structure</li><li>put the Inner Structure inside the Skin</li><li>put the Cap and screws</li><li>insert the usb light on the Bottom Cap(USB)</li><li>put the Bottom with screws</li><li>Enjoy!</li></ol>&nbsp;you can also watch this video for the assembly of the whole lantern (<a target="_blank" href="https://youtu.be/8H79FUdZIUM?feature=shared" rel="nofollow noopener">Youtube</a>)<figure class="media"><div data-oembed-url="https://youtu.be/8H79FUdZIUM?feature=shared"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8H79FUdZIUM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

动漫

coaster

玩具

龙珠

gift

灯箱