rbaile508

SabreDesign

Modern Mother&#39;s Day statue featuring three children. Loving gift for your mom this mother&#39;s day, or use the statue to decorate your home in a stylish manner. You can find the single or dual child version here: <a target="_blank" href="https://makerworld.com/en/models/442167#profileId-348042" rel="nofollow noopener">https://makerworld.com/en/models/442167#profileId-348042</a>https://makerworld.com/en/models/442737#profileId-348702 Mother and children are printed seperately and can be pushed together to make the statue complete. The statue shows the unbreakable bond between parent and child. The model is 130 mm tall and can also be scaled up to your liking.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449151/design/2024-04-30_b56ebf5e4d241.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449151/design/2024-04-30_0b471f1a81b59.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449151/design/2024-04-30_2c508b47b182d.png">

Mother's Day Statue three children

Gifts

AU3D

<h3>Key Advantages</h3><ul><li>Only 7g of filament per ring.</li><li>Compatible spool brand name impressed.</li><li>Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.</li><li>Rounded contour lowers the chance of damaging plastic storage bags.</li><li>Flat variant for full AMS compatibility (see tolerance and compatibility section)</li><li>200mm diameter variant for slightly bigger spools (199mm is the standard size)</li></ul><h3>Description</h3>This isn&#39;t merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters.&nbsp;This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!<h3>Tolerances</h3>Compared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process (up to +/-2mm). Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model&#39;s scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the &#34;uniform scale&#34; option before proceeding. If your spool&#39;s diameter exceeds the default setting, consider increasing the scale by 1%. Conversely, if your spool&#39;s diameter is smaller, reduce the scale by 1%, and your setup should be ready for use.<h3>Compatibilty</h3>eSun Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the rounded adapter, they surpass Bambu Labs’ specifications. Consequently, users have a couple of options to address this:<ul><li>AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.</li><li>Custom Backside Rollers: Alternatively, consider implementing custom backside rollers specifically designed to support these larger rolls.</li><li>For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.</li></ul>For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.<h3>Printing</h3>When it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.<h3>Other Filament Brands</h3>This adapter is available for other brand&#39;s cardboard spools (<a target="_blank" href="https://makerworld.com/en/@AU3D/collections/565167" rel="nofollow noopener">Link to Collection</a>):<ul><li><a target="_blank" href="https://makerworld.com/en/models/251717" rel="nofollow noopener">3DGenius</a></li><li><a target="_blank" href="https://makerworld.com/en/models/233956" rel="nofollow noopener">3DHojor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197741" rel="nofollow noopener">Aceaddity</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197938" rel="nofollow noopener">ANYCUBIC</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197839" rel="nofollow noopener">ATA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377775" rel="nofollow noopener">Bblife</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254552" rel="nofollow noopener">Colorful</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192941" rel="nofollow noopener">Comgrow</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192757" rel="nofollow noopener">Creality</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253694" rel="nofollow noopener">CUIEED</a></li><li><a target="_blank" href="https://makerworld.com/en/models/251342" rel="nofollow noopener">Dikale</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376740" rel="nofollow noopener">DO3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237701" rel="nofollow noopener">Duramic 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180213" rel="nofollow noopener">Elegoo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194714" rel="nofollow noopener">ENISINA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175447" rel="nofollow noopener">Eryone</a> / <a target="_blank" href="https://makerworld.com/en/models/372282" rel="nofollow noopener">Eryone 2024+</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180253" rel="nofollow noopener">eSun</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246501" rel="nofollow noopener">Filafarm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377992" rel="nofollow noopener">Firos</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376304" rel="nofollow noopener">Flashforge</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196175" rel="nofollow noopener">FormFutura</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375168" rel="nofollow noopener">GNVTNTP</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192804" rel="nofollow noopener">GratKit</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246162" rel="nofollow noopener">Grauts</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253905" rel="nofollow noopener">Inland</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254313" rel="nofollow noopener">IWEColor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192773" rel="nofollow noopener">JAMG HE Conjure</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175622" rel="nofollow noopener">Jayo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/176924" rel="nofollow noopener">Kexcelled</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375526" rel="nofollow noopener">Kinluot</a></li><li><a target="_blank" href="https://makerworld.com/en/models/249610" rel="nofollow noopener">Kretrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/252594" rel="nofollow noopener">Lovoon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376013" rel="nofollow noopener">Mchyi</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245976" rel="nofollow noopener">Meltbro</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253497" rel="nofollow noopener">MKOEM</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194179" rel="nofollow noopener">Ninetec</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245837" rel="nofollow noopener">OEM Mika3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175704" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237378" rel="nofollow noopener">OVV3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/177047" rel="nofollow noopener">Polymaker</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254827" rel="nofollow noopener">Protopasta</a></li><li><a target="_blank" href="https://makerworld.com/en/models/239790" rel="nofollow noopener">R3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238604" rel="nofollow noopener">Raise3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206466" rel="nofollow noopener">Redline Filament</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234098" rel="nofollow noopener">Reprapper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/193658" rel="nofollow noopener">Prindano</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196488" rel="nofollow noopener">SainSmart</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194367" rel="nofollow noopener">Sovol</a></li><li><a target="_blank" href="https://makerworld.com/en/models/242422" rel="nofollow noopener">Spectrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/235861" rel="nofollow noopener">Sunlu Elite Series</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194269" rel="nofollow noopener">Tinmorry</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206360" rel="nofollow noopener">Tronxy</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238095" rel="nofollow noopener">TTYT3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194520" rel="nofollow noopener">Two Trees</a></li><li><a target="_blank" href="https://makerworld.com/en/models/236118" rel="nofollow noopener">Yousu</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234380" rel="nofollow noopener">YOYI YOYI</a></li></ul>

ESUN Cardboard Spool Adapter

AMS Spools

BC Designs

Mounting the external spool on the side for easier access, with added filament guide for smooth operation. &nbsp;&nbsp;Parts<ul><li>2 x 608ZZ bearings</li><li>1 x PC4-M10 Pneumatic Connector (optional, included filament arm for PTFE tubing for those without)</li><li>1 x m3 x 14mm or 16mm for the top screw hole (start with the smaller one first as can bottom out and get stuck easily).</li><li>2 x m3 x 18mm for the bottom screw holes.</li></ul>Connector: <a target="_blank" href="https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>&nbsp;Choose either the 3mf file with the PC4-M10 fitting, or the one with PTFE passthrough.&nbsp;Included 3mf file setup as follows:<ul><li>0.20 layer height @ 50% infil, I recommend PLA+</li><li>4 walls</li><li>4 top and bottom layers</li><li>Supports</li><li>Spool on 2nd build plate as I think the model looks better in 2 colours :)</li><li>Both filament arms included on build plate, remove the one you dont want.</li></ul>&nbsp;Assembly<ol><li>Spend a few minutes carefully removing the supports from the inner slots </li><li>Screw on the pneumatic connector to the filament guide and inert some bowden tubing. The PC4-M10s allow the tubing to pass through.</li><li>Screw to side of case using the top back case screw hole and the 2 original screw holes.</li><li>Slide on spool holder. </li><li>Slide on filament arm.</li><li>Detatch when not in use or leave as is.</li></ol>

Bambu X1C / P1S side mount spool holder v2

X/P Series

darren.meier

I downloaded a really handsome AMS cable tidy guide recently that was real popular and kinda shaped like Texas. But once I printed it I found a few issues for my particular use case-- one, I needed it to support using an AMS riser. Two, I wanted it to have clearance for quick release buttons at the AMS junction box. And three, the feed lines didn&#39;t quite line up with the AMS junction box on the back of the printer. So I gave it a bit of thought and realised that I could support more use cases by using a couple control points instead of set curves as cable guides, and measured out the most precise feed lines that I could so the PTFE feed tube leads perfectly into the junction box. The upper guide for the AMS power/data cable is segmented so you can exit the run at multiple points if you&#39;re running an AMS riser taller or lower than my own. I included models with and without branding so you can look as basic or extra as you like; and there are versions that support 12mm x 1.5 magnets (nominally 12mm x 2mm but I find most of them are 1.5mm deep) and versions without, in case you want to use some double sided tape to further secure it. I hope some of you might find this design useful, thanks for looking and have a great day!&nbsp;ASSEMBLY NOTE-- you&#39;ll remove the AMS junction box to install this. Remove the two screws, disconnect the PTFE tubes (at the Bowden connector entering the printer, and at the junction box leading from the AMS). Slide the outflow PTFE tube through the channel exiting the junction box toward the printer, then reattach the junction box to the printer with the original screws and reconnect everything else. Slide the feed PTFE tube through its channel to the junction box. Voila!&nbsp;UPDATE! &nbsp;Hi guys! Had a few requests to try my hand at a similar idea for the AMS hub for users with more than one AMS unit. Took me a bit to figure it out after I received my hub from Bambu, but the model is uploaded now on Makerworld. Here it is if you need it, cheers! https://makerworld.com/en/models/399409#profileId-300929&nbsp;Shoutout to KobaRiley for inspiring this model. I modeled this from scratch and I feel it approaches the problem in a different manner so I&#39;m not labeling it a remix, but I wouldn&#39;t have had the idea for it without trying his cable tidy. So thank you, friend, for your model!

AMS cable manager for X/P series

X/P Series - New Printer Prints

Kt's Glitter Bar

Original file came from Printables<a target="_blank" href="https://www.printables.com/model/502016-flexi-sloth-hook-claws-for-hanging" rel="nofollow noopener">https://www.printables.com/model/502016-flexi-sloth-hook-claws-for-hanging</a>&nbsp;I remixed the face for use with AMS.

Flexi-Sloth with mulit-color face for AMS

Toys

ordnerino

When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be.&nbsp;This test has eight sections to test the finish:<ul><li>45 degreee overhangs</li><li>indent text, digits and shapes</li><li>curved zig-zag</li><li>90 degree sharp turns</li><li>medium and big curves</li><li>90 degree big turn</li><li>wide zig-zag</li><li>vertical indents to evaluate face to face</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/490608/2024-02-03_335978ceb9437.png"></figure>The model is 30mm in height, with 3mm sections, so 10 different speeds can be tested (e.g. 20 to 200 mm/s).The Thickness is chosen to be two extrusion widths (0,42-0,45mm).The test takes roughly an hour (greatly depending on your settings).

Surface Finish Speed Test

Tests

dalet11

This is a fully calibrated profile for Elegoo PLA+ Black.This is a cheap and great filament I really like and print a lot, costs around 13-15$ per 1kg on Amazon most times.<h3>Calibrations done:</h3><ul><li>Temp tower</li><li>Flow rate</li><li>Pressure advance</li><li>Volumetric flow for optimal printing speeds.</li></ul>&nbsp;With this profile & filament prints are beautiful and consistent.&nbsp;This is made with X1C, and should work the same on P1 series.&nbsp;Download RAW file - can't upload a profile with custom filament profile :)&nbsp;

Elegoo PLA+ Calibrated profile

P1S Filament Profiles

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

Cool Models

STomHacks

I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. The easiest way to print in multicolor is to use the full model and apply the color you want for the strings on the entire model and then apply the other colors to the structure and the hand.

Suspended Hand

Decoration

cartyski

Struggling to open jars of all shapes and sizes? Say goodbye to stubborn lids with this jar opener designed to fit them all!

OPENSESAME3000 - Jar Tool

Organization 

kerngebiet

Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems.Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has a tendency to bend down while printing if you have insufficient part cooling. I also suggest a 0.12 - 0.16mm layer height. In the picture you'll find a comparison about the different settings.Also try to print multiple covers at once, to give each layer more time to cool. I personally print them in a batch of nine.&nbsp;Update 19.01.2023 - Steeper versionI've added a version with a steeper connection between the handle and the cover. This might be better printable on printers with less good cooling or materials that may tend to bend down.&nbsp;Update 21.01.2023 - Reinforced v2I've added a new version of both models with a reinforced connection between the cover and the part going into the Ethernet port. This may prevent cracks at this point.