ramey.cr

melchior.geurts

This model was made to fullfill a need of blowing away sawdust from a workbench and leaves from a car. This was undoable with the standard long nozzle. The nozzle has a height of about 15 cm.The print takes about 2 hours and took 32 grams of filament on my P1S and fits directly.I printed it out of PLA+ with a=15% infill, if you're planning on leaving it out in the sun i'd advise you to print it from PET-G or ABS.&nbsp;This is a re-upload of my model because the old one was taken down for unkown reasons. The appeal failed too :(.

Short blower nozzle for Makita DUB186Z

blower

lloydliu

为拓竹AMS设计的干燥剂盒，带有一个方便拿取的提手，以及一个经过特别设计的盒盖，盒盖带有两片刀刃型侧板，在向外翻转打开时，可以形成一个小漏斗，辅助装填分子筛或球形变色硅胶干燥剂颗粒。干燥盒分为标准型和薄型两款，分别用于放置在料盘中间的槽位空隙和紧贴边缘的窄间隙位置。&nbsp;11-22更新：1、为统一适配温度计版和标准版干燥盒，重新调整了翻盖的造型（原版本保留，可选择性打印，但互不兼容）；2、根据新的翻盖重新调整了标准型干燥盒翻盖结构（原版本保留，可选择性打印,但互不兼容）；3、缩小了薄型干燥盒的手柄，以避开料盘；4、经测试发现镂空翻盖在打印时容易出现首层不良，因此去掉了盖子的镂空；5、重新上传了所有3mf和stl文件。&nbsp;&nbsp;The drybox designed for Bambulab AMS has an easy-to-reach handle and a specially designed cap with two knife-edged side plates, that can be flipped outwards to create a small funnel to assist in filling molecular sieves or spherical color-changing silica gel desiccant granules. The drybox is available in two versions, standard and slim, and is used to place the slot gap in the middle of the tray and the narrow gap close to the edge, respectively.Update in 11-22:1. In order to uniformly adapt the thermometer version and the standard version of the drybox, the shape of the cap has been readjusted (The original version is retained and can be optionally printed, but two version are incompatible) ;2. The structure of the standard drying box was readjusted according to the new cap (The original version is retained and can be optionally printed, but two version are incompatible) ;3. The handle of the slim drybox has been reduced to avoid interfering the spool;4. After testing, it was found that the hollow cap was prone to defective first layer when printing, so the hollowing out of the cap was removed;5. Re-uploaded all the 3mf and STL files.

AMS干燥盒 Drybox for AMS

JakeMakes

v2 available <a target="_blank" href="https://makerworld.com/en/models/101422#profileId-108205" rel="nofollow noopener">here</a>&nbsp;*v1.1 Update:<ul><li>Updated the &#34;blade&#34; to have a stronger tip and the filament profiles are geared more toward better layer adhesion. It might be too hot for some brands of PLA, but should work for most.</li><li>Added a pommel and set height layer modifier for a 2nd color if desired.</li><li>I have a v2 that&#39;s nearly ready and I&#39;ll post as a remix.</li></ul>Original DescriptionFirst attempt at a collapsible sword. I definitely have some things I&#39;d like to try for my next go, but it works and looks ok to me, so have fun!&nbsp;I used <a target="_blank" href="https://numakers.com/products/pla-filament?ref=4nyxoesl" rel="nofollow noopener">Numakers PLA+</a> for this and both swords have held up well with two boys sparring on the regular with them.

Print in Place Collapsing Sword

toys

Riffcat

Description for commercial use of model of sunset 3d designThe payment is twenty dollars Please make a deposit via PayPal Link: <a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a><a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a>Commercial use is indefinite if you pay $20 onceIf you pay $20 once, the model and all of my models are commercially available Also, the model to be released is commercially availableThere are already a lot of models coming out and modeling is doneAlso, if you want, we will give you a model file that will be releasedLet's make a profit from my model. Thank you for reading this For commercial use, please contact sunset_3d_design and pay the amount. Please tag me when posting on Instagram.<a target="_blank" href="https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare" rel="nofollow noopener">https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare</a>Hello, I'm sunset 3d, a student and designer. Let me introduce my dragon.<a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a> If you donate a little, it will be a big help in making a wonderful dragon.It's free of charge for 1-2 days for multiple people to print out and be happy. I was inspired by the work of a dragon.It was a perfect design and a rewarding modeling, but there was a lot to learn.Also, we considered the user's situation as much as possible.100% printed long! If you reduce the size of the model too much, the cross-section may be fused. You can print it out with 0. Cool, right?And it moves so smoothly. I think it's the best model I've ever made.I love putting new designs on cults for everyone to enjoy; I hope this is the first of many! It's my first 3D modeling, so I hope that I can improve over time and that many people like my model at least once.This work is protected by copyright. However, if you personally send an Instagram messenger and pay the settlement fee, you can continue to sell it.Thank you.I printed it with 4 layers of wall and 0% imprinting (I succeeded with 0% imprinting, but I recommend 10% because it's a little more powerful.I recommend using an in-person pen.Model downscaling may mean fusion of cross-sections, and upscaling may require support. It was tried and tested on a 100% scale, and the printing was excellent.For best results, ensure that the printer remains calibrated, horizontal, and folded. And please share what you made!

ARTICULATED flame dragon

Articulated

Jerich0

While I liked and created several blue_stik mount options for <a href="https://amzn.to/3DBXDg5" rel="nofollow">Wyze cameras</a> (see <a href="https://www.printables.com/model/532939-wyze-v3-blu-stick-mount-for-use-with-bambu-p1p-w-a" rel="nofollow">here </a>and <a href="https://www.printables.com/model/515411-wyze-cam-v2-blu-mount-v2-for-ams-bambu-p1p" rel="nofollow">here</a> and <a href="https://www.printables.com/model/504096-wyze-camera-v2-blu_stik-mount-for-bambu-p1p" rel="nofollow">here</a>) I kept thinking there should be a better and more low profile way to mount the camera on top of the printer. Adding the AMS really made the clearance of the blue_stik mount tight… so that was another prompt to find a different solution. I had previously printed a nice cover for the screen, and decided to remixed that and add the wyze camera mounts to it. Since i have 2 P1Ps (one of them waiting to be upgraded to P1S), and 2 different wyze cameras - a <a href="https://amzn.to/44PEq6s" rel="nofollow">v2</a> and a <a href="https://amzn.to/3DBXDg5" rel="nofollow">v3</a>. I made 2 variants. In the photos, the <a href="https://amzn.to/44PEq6s" rel="nofollow">v2 </a>is attached to the white screen cover, and the <a href="https://amzn.to/3DBXDg5" rel="nofollow">v3</a> is on the black.If you like the painted dual color version, download the .3mf file, it has my painting of the parts on 2 build plates. If not, just download the stl files.hope this works for you! i made these fairly quickly, so i may continue to tinker on them. Feedback would be appreciated! update: added a camera hood for the <a href="https://amzn.to/44PEq6s" rel="nofollow">wyze cam v2</a>, as the printer that has that camera has a glass top, and also a light right above it that causes reflection, this hood seems to solve it. As usual, feedback welcome.