rainwbear

Monster

平衡棋 带底座收纳盒 多个棋子模型

平衡棋 带底座收纳盒 多个棋子模型

游戏

LiangZ

用于纺织手绳的支架, 可调节长度

手编绳支架

编绳

Catherine Doucet

<h3>The Universal Storage System for SKADIS features fixed bins, pull-out bins, drawers and shelves. All the pieces can be used as single organizers or in a system as they will all fit around each other.</h3>&nbsp;Features :<ul><li>Uses the Universal Mounts, other designs in this <a target="_blank" href="https://makerworld.com/en/u/1637693929/collections/435081" rel="nofollow noopener">collection</a> use the same mount<ul><li>SKADIS, Wall Mounted, Honeycomb and Multiboard are in the works</li></ul></li><li>Dimensions made to perfectly align with the SKADIS Board</li><li>Take the components you need and arrange them however you desire, they will always fit with one another</li></ul>&nbsp;Here is the list of the currently available designs :<ul><li>#1 Single Fixed Bin</li><li>#2 Double Fixed Bin</li><li>#3 Single Drawer</li><li>#4A Double Drawer</li><li>#4B Double Drawer</li><li>#5 Single Pull-Out Bin</li><li>#6A Double Pull-Out Bin</li><li>#6B Double Pull-Out Bin</li><li>#7 Single Shelf</li><li>#8 Double Shelf</li></ul>&nbsp;Printing tips :<ul><li>Print with a regular 0,20mm profile, no brim, no support needed</li><li>Print the SKADIS universal mount with the regular 0,20mm profile with 4 walls instead of 2</li></ul>No assembly needed, simply slide the SKADIS Universal Mount into the SKADIS board and instal your chosen organizer

Universal Storage System - For SKADIS

洞洞板

RealNationPrint

<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2>&nbsp;&nbsp;Cockpit Phone Holder Clip v1&nbsp;An innovative 3D print that revolutionizes the way mobile phones are used in cars is the new mobile phone clip for the car cockpit. This unique accessory is specifically designed to securely and stably hold a wide range of mobile phone models and can be effortlessly attached to the dashboard or ventilation slots of the vehicle. Utilizing advanced 3D printing technologies, the clip is not only robust and durable but also light and compact, making it perfect for mobile use. Its innovative design allows for quick and easy attachment of the mobile phone, enabling the driver to use the device for navigation, hands-free calls, or entertainment without compromising safety. Furthermore, thanks to its flexibility and adaptability, the clip can easily be adjusted to fit different vehicle types and mobile phone models, making it an indispensable accessory for modern drivers.  Please note that for midsummer, it&#39;s advisable to print the holders with PETG, or even better, with ABS or ASA.&nbsp;<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2><h2>  </h2>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-11_6d96144b55f638.png"></a>&nbsp;Here u can find the Desk Version of the Clip:  <a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener">https://makerworld.com/en/models/423769#profileId-327023</a>&nbsp;&nbsp;THE ULTIMATIVE HOOK → CARBUDDY!! <a target="_blank" href="https://makerworld.com/en/models/425555#profileId-329178" rel="nofollow noopener">https://makerworld.com/en/models/425555#profileId-329178</a>TrashBin - Nintendo Switch Holder - Can Holder and More with just 1 Hook!!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-12_8948006ddb168.png"></figure>&nbsp;&nbsp;Funny &#34;scent tree´s&#34; pendant  <a target="_blank" href="https://makerworld.com/en/models/420970#profileId-323754" rel="nofollow noopener">https://makerworld.com/en/models/420970#profileId-323754</a> Multi CarClip: <a target="_blank" href="https://makerworld.com/en/models/420980#profileId-323752" rel="nofollow noopener">https://makerworld.com/en/models/420980#profileId-323752</a>&nbsp;Visit my other Model <a target="_blank" href="https://makerworld.com/en/@RealNationPrint/collections" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint/collections</a>  I&#39;d appreciate a like/follow and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Cockpit Phone Holder Clip v1

Modelicious Creations

The Egg-ceptional Utility to Transform Ordinary Eggs into Works of Art&nbsp;Say goodby to messy hands with this egg painter. The holder is equipped with two gears, allowing you to rotate the egg and paint it from all sides. All you need for assembly is a rubber band, nothing more! Integrated into the base are six pots for paint and a brush holder left and right.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/774962/2024-03-10_076a1d072aa6b.gif"></figure>(note: please click on the image above if the animation does not play automatically.)&nbsp;<h2>Parts Needed</h2>All you need is a rubber band with a diameter of approximately 4 cm.<h2>Assembly</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/774962/2024-03-10_9cca59eea7fb9.gif"></figure>(note: please click on the image above if the animation does not play automatically.)&nbsp;<ul><li>Remove the supports carefully.</li><li>Insert the short rod into the hole on the left side of the base.</li><li>Attach one of the gears to fixate the rod. The gears are press-fit. If it does not go in well, turn it around. Sometimes due to elephant's foot one side of the hole is tighter than the other.</li><li>Insert the long rod on the right side of the base.</li><li>Take the wheel with the two notches and put it onto the long rod from the right side. The notches should face outwards.</li><li>Attach the second gear to the long rod. Again, turn the gear around if the fit it too tight.</li><li>Take a rubber band of about 4 cm.</li><li>Guide it through the two notches of the wheel.</li><li>Then, attach the two ends of the rubber band to the cantilever-like sections from the base.</li><li>The rubber band pulls the long rod to the inside with enough force to hold an egg.</li><li>If the force is not sufficient, take a shorter rubber band or loop it around more.</li><li>If the tolerances of your print are good, you should be able to turn both rods using the gears.</li></ul><h2>Printing Instructions</h2>The model does not require any special filament. Regular PLA should be enough. I took quite some care to optimize print settings. The rods need to be printed in vertical direction so that they are perfectly round. The tree supports should give enough stability.&nbsp;<h2>Commercial Use</h2>The model on this website is only available for non-commercial use. This means you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license, please visit <a target="_blank" href="https://cults3d.com/en/3d-model/tool/easter-egg-painter-for-commercial-use" rel="nofollow noopener">https://cults3d.com/en/3d-model/tool/easter-egg-painter-for-commercial-use</a>

Easter Egg Painter

绘画

ThemeParkBoy

<a target="_blank" href="https://makerworld.com/en/models/386610#profileId-287035" rel="nofollow noopener">a new version is available</a><a target="_blank" href="https://makerworld.com/en/models/386610#profileId-287035" rel="nofollow noopener">https://makerworld.com/en/models/386610#profileId-287035</a>&nbsp;Introducing the adorable and versatile "Croc Charm Mini Crocs," a delightful 3D model designed to bring fun and personality to your miniature Crocs collection. These charming charms are miniature replicas of the classic Crocs footwear, perfectly scaled down to adorn your favorite small accessories.&nbsp;Crafted with meticulous attention to detail, the Croc Charm Mini Crocs feature all the iconic elements of the beloved footwear, from the textured design to the signature ventilation holes. Each mini Croc is intricately sculpted to capture the essence of the original, ensuring authenticity and charm in every piece.&nbsp;Ideal for adorning keychains, backpacks, or even as playful decorations for your desk or shelves, these mini Crocs add a touch of whimsy to any setting. Whether you're a dedicated collector of miniature items or simply love accessorizing with unique charms, the Croc Charm Mini Crocs are sure to delight both young and old alike.&nbsp;Printed in high-quality materials, these mini charms boast durability and vibrant colors, ensuring they withstand the test of time and retain their eye-catching appeal. Let your imagination run wild as you mix and match these adorable charms to create your own miniature Crocs collection.&nbsp;Embrace the charm of miniaturization with the Croc Charm Mini Crocs – because even the smallest details can make a big impression!

croc charm mini crocs

0.2喷嘴

emmaginn

<h2>Palm Planter with Hidden Drip Tray</h2>This one has definitely taken me the most time to complete and is definitely my all-time favorite so far. The one in the photo is the 4 in. container size. I&#39;ve also included a print profile for 5 in containers. Hope you like it as much as I do!&nbsp;Printing - I was able to print it without support on the sides with no problem. You will still need supports on the bottom of the top part and on the bottom part to support the tabs.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Palm Planter with Hidden Drip Tray

园艺

Michaelwg

A easy and fun little game, the rules can be altered to your wish, but here is the set I use :)&nbsp;Up to 4 players.&nbsp;Each player gets 8 bottles.The winnier is the first one to get rid of all its bottles.The oldest player starts, turns go clockwise.If the dice shows 1-5 the player can move one of its bottles to the empty spot in the middle, if it shows 6, the player can remove one of its own bottles completely from the board. When this happens all the other players take a sip of their beer.&nbsp;You can keep throwing dices as long as you want or until you throw a number with a bottle in the spot in the middle, In that case you take the bottle to your other bottles, take a sip of your beer and the next player gets the dice.&nbsp;If a player get rid of just 1 bottle the dice can be passed if wanted.&nbsp;When the first player gets rid of all its bottles, the other players has to empty their beers, CHEERS! :)&nbsp;

Funny drinking game - Cheers!

聚会游戏

franceschellifederico

<blockquote>A compact stand for taking great product photos with the right background!</blockquote>I redesigned <a target="_blank" href="https://www.thingiverse.com/thing:5212231" rel="nofollow noopener">this</a> “Photo Studio Stand” from scratch, making some modifications.This model should be useful for your photos.Use this model with A4 sheets!A3 versione <a target="_blank" href="https://makerworld.com/it/models/51765#profileId-53517" rel="nofollow noopener">here</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377716/2023-10-29_ce442251c1177.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377716/2023-10-29_0ed95e1e1dbed.png"></figure>

Photo Studio Stand  [ A4 sheets ]

拍摄

knobby

Simple cat tunnel to extend cat flap through brick wall

Cat flap tunnel

宠物

鼓捣猫宁小作坊

尖嘴瓶收纳架 预调完的颜料放上节省空间

尖嘴瓶架  颜料架 喷涂手涂

喷涂

3DPrintNovesia

Nearly every 3d printed wallet is a hardcase wassel or card holder; thats okay but I'm not a fan of it and I also need space for cash and the change. So lets break down a simple normal wallet:<ul><li>its foldable</li><li>space for cards</li><li>space for bills</li><li>and a coin pocket</li></ul>&nbsp;Alright lets take these four topics to design the perfect 3D printed wallet. I don't want a hardcase wallet and it should be foldable?<ul><li>Only solution here is, flexible material. so I choose TPU with a shore hardness of 95A</li></ul>&nbsp;Space for Cards and for Bills aren't that challenging. I just need to create small pockets which dont fuse together while printing. Thats how I came up with the design and Print orientation like it is. Closed and standing up. There are 3 Slots for 3-4 Cards each! so up to 12 Cards in total! The most challenging part to design was the coin pocket. I don't wanted to change the orientation of the model so I needed to fit it in like the model was set. I designed it so it can be enlarged by itself after printing. And also the lash ist coming down perfect so the holes for the buttons will just allign perfectly. I use this push buttons for the coinpocket, you can find it on <a target="_blank" href="https://www.amazon.de/gp/product/B000P15BLC/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B000P15BLC&linkCode=as2&tag=machmal3d01-21&linkId=5bd54badec361b091f4c49e5d0c0d93e" rel="nofollow noopener">Amazon</a>. Since then I used it as my regular wallet and it survived without any damage. It just got a little bit dirty over the time while i tested it by using it every day!<img src="https://media.printables.com/media/prints/244206/rich_content/480e74fa-6151-4793-a7c8-82bcebe06c56/ezgifcom-gif-maker-1.gif"> Print it standing up, like it’s orientated in the file. Use a brim to get better bed adhesion! Use 2 Perimeter and Infill around 30%, no Support and ofcourse use TPU

Flexible TPU Wallet with Coinpocket! (Print in Place)

ILImy2024

This requires multiple colors of filament, you can mix and match your own colors.Print Profile 1 : This requires 3 colors of filament.Print Profile 2 : This requires 2 colors of filament. Print Profile 3 : This requires 2 colors of filament. Applicable to A1 mini. Print Profile 4 : Ironing type:Topmost surface only, Top surface:60 mm/s. This requires 3 colors of filament. Use when higher quality is required.

Black Cat and White Cat Bookmark

学习物件

Every Day Counts

Great bin for the desk or the floor. Maybe use it to store kids toys. Anything really.&nbsp;The wheels are print-in-place and will turn after a bit of breaking loose - carefully. &nbsp;The height of the bin is 245mm (around 9.5 inches). Outer dimensions of the bin itself are 155 x 164mm (around 6 x 6½ inches).&nbsp;See also my smaller version of this bin that can be printed on the Bambu A1 Mini <a target="_blank" href="https://makerworld.com/en/models/58206#profileId-59954" rel="nofollow noopener">here</a>.<a target="_blank" href="https://makerworld.com/en/models/58206#profileId-59954" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/218322/2023-11-06_c74191741fc2e8.jpg"></a>

Wheelie bin - Trash or storage

微缩模型

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

高精度模型

Panky1978

Basic Nintendo arcade, without electronic components, it is made of PLA, no supports are needed.Upgrade with arcade stick and buttonsPD: The photos are of a different model with USB sockets and a fan, but the assembly parts are the same.

Arcade Nintendo Switch y Switch Oled

Switch

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

小块连接

RobDrivesCars

NOTE: If you're also looking for the headrest mount to be used with the Ford Maverick, <a target="_blank" href="https://makerworld.com/en/models/14957" rel="nofollow noopener">you can find it here</a>.----&nbsp;This was developed for The Drive's Great Ford Maverick 3D Print-Off where auto journalists Rob Stumpf (<a target="_blank" href="https://twitter.com/RobDrivesCars" rel="nofollow noopener">@RobDrivesCars</a>) and Peter Holderith (<a target="_blank" href="https://twitter.com/_baldtires" rel="nofollow noopener">@_baldtires</a>) spent two weeks building accessories for the Ford Maverick's FITS system.You can read more about it here: <ul><li><a target="_blank" href="https://www.thedrive.com/tech/its-time-to-vote-on-the-drives-best-ford-maverick-3d-printed-accessory" rel="nofollow noopener">https://www.thedrive.com/tech/its-time-to-vote-on-the-drives-best-ford-maverick-3d-printed-accessory</a></li><li><a target="_blank" href="https://www.thedrive.com/tech/i-3d-printed-a-heated-and-cooled-cupholder-for-the-base-ford-maverick" rel="nofollow noopener">https://www.thedrive.com/tech/i-3d-printed-a-heated-and-cooled-cupholder-for-the-base-ford-maverick</a></li><li><a target="_blank" href="https://www.thedrive.com/news/our-first-3d-printed-ford-maverick-accessories-are-taking-shape" rel="nofollow noopener">https://www.thedrive.com/news/our-first-3d-printed-ford-maverick-accessories-are-taking-shape</a></li><li><a target="_blank" href="https://www.thedrive.com/news/were-building-crazy-3d-printed-ford-maverick-accessories-and-we-want-your-ideas" rel="nofollow noopener">https://www.thedrive.com/news/were-building-crazy-3d-printed-ford-maverick-accessories-and-we-want-your-ideas</a></li></ul>

Mount for Nintendo Switch, Compatible with Ford FITS (Ford Maverick)

汽车配件

YelTrik Designs - Click FOLLOW

Echo Dot holder. Echo Dots should be heard and not seen. This holder gets your Echo Dot off your kitchen counter, desk, nightstand or dresser. Easily mounts vertically (side of a desk for example) or horizontally (under a cabinet for example). Integrated power cord management keeps it everything neat and tidy. This makes a great gift for anyone you care about, that includes you, who has a Alexa Gen 3 Echo Dot. &nbsp;NOTE: Can be mounted with Velcro with adhesive backing OR screws. I've been using Command Picture Velcro Strips with great success when mounted upside down.

Amazon Echo Dot Holder

电子

3DColorPop

<h2>Best Horizontal iPhone and iWatch Magsafe stand 2 in 1 - easy to print and assemble</h2>This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17.&nbsp;Require glue to keep parts together (superglue is fine).&nbsp;Compatible with all iPhones that have MagSafe and all AppleWatch models.&nbsp;Elevate your charging and display experience with our innovative iPhone and Apple Watch Stand, designed to effortlessly accommodate all iPhones featuring MagSafe technology and all generations of Apple Watches. Say goodbye to cluttered countertops and tangled cables and welcome a sleek and organized solution into your life.<h3>Key Features:</h3>Universal Compatibility: Our stand is tailored to fit all MagSafe-compatible iPhones, ensuring a secure and efficient charging experience. Plus, it's equipped to support all Apple Watch models, so you can conveniently charge and display your wearable tech in one place.&nbsp;Sleek and Minimalistic Design: Crafted with a modern aesthetic in mind, this stand seamlessly blends into any environment. Its clean lines and premium materials make it an elegant addition to your workspace, bedroom, or living room.&nbsp;Easy Assembly: Designed with user convenience in mind, our stand is a breeze to assemble. No need for complex instructions or tools. Simply follow the straightforward assembly guide, and you'll have your stand ready to use in minutes.&nbsp;Sturdy and Durable: We prioritize durability to ensure that your valuable devices are safe and secure. The stand is built with high-quality materials, providing stability and support for your iPhone and Apple Watch.&nbsp;Cable Management: Tired of messy cables? Our stand comes with integrated cable management, keeping your charging cables neatly organized and out of sight, providing a clean and clutter-free charging station.&nbsp;Multi-Functional: Beyond charging, our stand also serves as a versatile display platform for your iPhone and Apple Watch. Use it to watch videos, video calls, showcase photos, or even follow recipes while you cook.&nbsp;Upgrade your charging and display setup with our iPhone and Apple Watch Stand – the ultimate solution for MagSafe-compatible iPhones and all Apple Watch generations. Make your life easier, more organized, and more stylish with this essential accessory.Experience the future of charging and order your iPhone and Apple Watch Stand today. It's time to simplify your life and embrace the convenience of modern technology.

Best Horizontal iPhone and iWatch Magsafe stand 2 in 1 - easy to print and assemble

手机

JamesThePrinter

A rope ball made to look as if it has been tied into a monkey's fist style of knot. Resizing works well with this ball. I have successfully printed as small as 50% and as large as 200%, but further enlarging should be possible. The larger versions look nice as home decor. Smaller versions can be used as cat toys.This is part of my Rope Series. You can view all of my Rope Series models in <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">this collection</a>.To avoid using supports, I have broken this model into pieces. Multiple copies of some files are required:<ul><li>6x Outer Section</li><li>6x Pin</li><li>1x Center</li></ul>&nbsp;Print SettingsNo special settings are needed. The entire ball can be printed in about 4 hours.&nbsp;AssemblyGlue the 6 pins into the holes of the center. I recommend dry fitting a outer section piece on each of the pins. Once orientation and fit are confirmed, glue each piece in place.<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-22_4dfeur4mbcpm.png"></figure>If you have any issues holding the assembly together while your glue dries, I recommend using a couple of rubber bands.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Polymaker PolyTerra Sapphire Blue PLA</li><li>Polymaker PolyTerra Peach PLA</li><li>Prusament Galaxy Silver PLA</li><li>Prusament Galaxy Purple PLA</li><li>Prusament Galaxy Black PLA </li><li>Prusament Mystic Green PLA</li></ul>

Monkey's Fist

宠物玩具

Protopasta

<div><h1>Summary</h1><div>In celebrating coffee, Corey Marchetti of CM Designs curated a very special design for our fellow coffee connoisseurs.This beautiful pour over station has a place to tuck your Hario V60 Paper Cone Filters (or similar) and is height adjustable, with a twist of each leg, to fit your favorite <7” tall cup. The filter-holding pour over cone can be 3D printed or purchased.No supports needed, Corey printed these models with 0.2 mm layer height and 15-20% infill. This is an assembly. Part details are as follows:-Feet (Screws and Bases) (~20g PLA) - Print 3 screws upright, with a brim, and at a slow speed to reduce wobble. Print 3 bases. -Legs (~55g PLA) - Print 3 legs upright with a brim. -Top (~75g PLA) - Print top with the threads facing upwards away from the build plate. Compatible with Printed Pour Over Cone or Hario V60 Ceramic Coffee Pour Over Cone. -Printed Pour Over Cone (~85g PLA) - Print with the thread towards the build plate and the cone flaring upwards away from the build plate.Screws pop in to bases to make feet. Feet screw in to legs. Legs screw in to top. Screw pour over cone, printed or purchased, into top and insert filter. Place cup underneath and adjust height. Add coffee grounds, pour over with hot water, and enjoy!Corey selected Protopasta Double Espresso Brown (DEB) for the legs, Moonstruck White (MSW) for the top, and What Karat? Smooth Gold (SMG) for the feet. What classy colors! Reminiscent of both wood and coffee, DEB is a rich metallic brown with gold pearl for texture. MSW has a soft luster reminiscent of porcelain, while SMG has a smooth and shiny metal-like look.With Protopasta there are so many pastabilities to make this design your own when 3D printing. Instead of DEB, choose Matte Fiber for more wood-like legs, or choose a metal composite for feet to add weight and finish with a polish or patina. How about your favorite team colors or some enthusiastic glitter to make your stand unique?Download this Pour Over Stand Assembly for free to print your own with only 150-235 grams of PLA-density filament.More details at www.Protopasta.com/pages/blogNew to Protopasta? The discount code NOODLENOOB gets 10% off your first order at Protopasta.com. While at Protopasta.com, subscribe to our newsletter for the latest news and discounts.</div></div>

Protopasta 3D Printable Coffee Pour Over Stand Assembly

厨房

Brent Peterson

<h2>NEW! Updated design with 3 sizes available (300mm, 450mm, 600mm)</h2>This is a concept I've been working on for printing load-bearing beams longer than your build volume allows; the model prints in-place as a single piece and snaps together to form a beam. As the name “Flex-Lock” suggests the design consists of two parts; a flexible connector that doubles as a tensioner when the system is under load and a locking mechanism that aligns and connects the two pieces together. The print is oriented in such a way that the majority of forces applied are along the XY print plane which minimizes issues due to layer adhesion.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/UWR9IbwJNEo"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=UWR9IbwJNEo"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/UWR9IbwJNEo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Interested in a practical use case? Checkout my <a target="_blank" href="https://makerworld.com/en/models/62237#profileId-64752" rel="nofollow noopener">IKEA filament rack</a> which uses a pair of these beams to support four spools of filament.&nbsp;Interested in other experimental prints? Checkout my <a target="_blank" href="https://makerworld.com/en/models/41359#profileId-43883" rel="nofollow noopener">Calibration Hypercube</a> or <a target="_blank" href="https://makerworld.com/en/models/47671#profileId-49464" rel="nofollow noopener">10 gram PLA calibration weight</a>

Flex-Lock - Load-bearing beams that print in-place

测试模型

kevr102

This project is not my idea by any means, it's just my interpretation of it.The amount of times I have drilled a hole and usually held a damp cloth or something else underneath to catch the debris is numerous and always as I remember quite messy,This dust caddy eliminates those situations, designed with Fusion 360, this caddy features a drill hole with chamfer to deflect the debris into the container both top and side edges to stop debris from flying all over the place, a handle to hold the caddy in place when drilling, and an outlet at the top for ease of emptying the debris out after drilling, this will prove to be a very useful addition to the tool box in the future.This component needed support for both the handle and container.Thanks for looking.buymeacoffee.com/kevr102

Drill Dust Caddy

五金或装修工具

SabreDesign

Angel ornament to hang in your christmas tree.&nbsp;Quick and easy print, 110 mm tall and 102 mm wide. If you want to support me or get a commercial license you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below or on my profile, liking and downloading helps supporting more models :) <img src="https://makerworld.bblmw.com/makerworld/draft/836537/2023-11-08_2ab5b94480a02.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836537/2023-11-08_99679c875a1ae.png"><img src="https://makerworld.bblmw.com/makerworld/draft/836537/2023-11-08_0a52f498712fd.png">

Angel 

装饰

Markus710

fits perfektly on the ikea lint roller

lint roller

家用工具

3DVJModels

This Fidget Hand Roller is an easy print for all Bambu printers as it has tight tolerances. It's very satisfying too!&nbsp;To imagine what you can expect from this hand roller, grab two markers and spin them around each other. See how nice that is? This model was made in aim to replicate this with the use of (4) 608 ball bearings.&nbsp;**Update 2 - 11/17/23- Updated all print profiles with support free rollers.- Removed unnecessary filaments- Added and additional key to profiles only containing one.&nbsp;**Update 1 - 11/17/23 - Added five additional textured rollers for a better experience.&nbsp;Don't have any metal bearings? Try printing Cernott's Remixed Tighter 608 Roller Bearings : <a target="_blank" href="https://makerworld.com/en/models/24750#profileId-33079" rel="nofollow noopener">https://makerworld.com/en/models/24750#profileId-33079</a>These bearings may not roll smooth but do fit this model to make it 100% printable! Be sure to clean out any area for bearings to ensure great fitment, everything will be snug! &nbsp;The files provided include three build plates in which you can mix and match depending on your color and texture roller preferences. There is many print files, one with the rollers closer together (compact version), another with these rollers about 5mm more apart (wide version), a tri-roller design for people with larger hands, and a triple “inline” roller version to roll between both hands or roll out some tense muscles across the body.&nbsp;All print settings are provided in each print profile.&nbsp;These rollers feature a hollow cavity which can be filled with beads for an interesting sound and added weight!&nbsp;My prototypes were made with PLA, please enjoy and have fun rolling away!&nbsp;Assembly&nbsp;1.) Begin by inserting the screws inside the roller frame (compact or wide).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_gut8zgwqgegg.jpg"></figure>2.) Place two of your four 608 bearings over the screws.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_8q4ha5cznq4r.jpg"></figure>3.) Begin slowly threading the two inner roller tubes on each screw. Be sure to not over-tighten!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_s394szzkpdht.jpg"></figure>4.) Press the other two bearings you have on hand into your desired rollers.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_ap09iwn8v661.jpg"></figure>5.) Slide the desired rollers overtop the previous assembly and press them down onto the fixed bearings.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_nm9fe5fv4rsc.jpg"></figure>6.) Lastly, fasten the other roller frame to the inner rollers passing through the final two bearings with the remaining two screws. The key can be helpful here (you may find the othe side rotating so print two keys if this is the case).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_e8o7kzp6y2ht.jpg"></figure>7.) Enjoy your new toy!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181995/2023-11-12_sj94xa9h9vr3.jpg"></figure>&nbsp;

Fidget Hand Roller - Featuring 8 Unique Textured Rollers

锻炼

C Model

It helps categorise, manage, and present content effectively, commonly found in applications.&nbsp;About 130mm in width x 30mm in height.&nbsp;Additionally, take a look at my latest model: <a target="_blank" href="https://makerworld.com/en/models/74403" rel="nofollow noopener">https://makerworld.com/en/models/74403</a>&nbsp;Suggested print settings:<ul><li>No supports are needed but follow the suggested print orientation for ideal results.</li></ul>&nbsp;Change Log:&nbsp;<ul><li>7 November 2023: Created a connector component (&#34;Divider Board Connector-ChrisTech.stl&#34;) for linking or extending multiple divider boards (&#34;Divider Board-ChrisTech.stl&#34;).</li><li>15 November 2023: Fine-tuned the tolerance in the design for the divider board(&#34;Divider Board-ChrisTech.stl&#34;).</li><li>21 November 2023: Upload an editable file for the divider board(&#34;Divider Board-ChrisTech.f3d&#34;). Should the current length of the divider board be insufficient, you have the option to utilise the pattern feature for extending its length and revised Connector - Version 2 (&#34;Divider Board Connector Version 2-ChrisTech.stl&#34;).</li></ul>&nbsp;Buy me a coffee?If you like my work, show me a little support by <a target="_blank" href="https://www.buymeacoffee.com/chrisong" rel="nofollow noopener">buy me a coffee</a>. Appreciated!&nbsp;&nbsp;

Divider DIY Storage

收纳

Crafty Sven

Snowman to top your LED lamp kit for Christmas.For the best effect, use colors that are opaque or translucent ! ☃️&nbsp;Please print the base from the original link, or use the one you have already.&nbsp;

Snowman for LED Lamp 001

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

打印机配件

agepbiz

<figure class="media"><div data-oembed-url="https://youtu.be/LYwZcH8kKiw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LYwZcH8kKiw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Print-in-place and Articulated Surprise Egg #5 - Tiny Fire Truck Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.Both the fire truck and the egg was each designed to be printed in place without any support structures. The fire truck has three pairs of rotatable wheels, liftable and rotatable ladder. The egg is hinged<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>Rafts: NoSupports: NoResolution: 0,1mmInfill: 50Notes:3 Shell to make the axles sturdy

游戏

编绳

洞洞板

车

绘画