raineselijah117

raptordemon

I recently purchased a plasma pistol from ThinkGeek (RIP Timmy) and I felt it needed a plasma cartridge to go with it.I modeled this to match the size of the Think Geek prop. This is also my first prop I've ever designed.you will need 2 end caps and 2 rings, I've added a flat and a textured version depending on what you are looking for (the flat one should print better).Edit: I added a chamfer to help the parts fit together and also designed a part that can be glue on after for the end capsHappy Printing

Plasma Cartridge from Fallout 4 and Fallout 76

pipboy 

xsynaticc

Small plug to cover the hole on the top plate.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/93556/2023-09-22_0d5986b84e22b.gif">&nbsp;Not fancy enough? Try it with a Ghost Ornament!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/40662#profileId-40577" rel="nofollow noopener">https://makerworld.com/en/models/40662#profileId-40577</a>&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/93556/2023-10-15_da835f23f0196.gif">

Bambulab P1S P1P Case plug / Top cover

p1s stuff

JamesThePrinter

*This project requires one 608 bearing*There is a printable spring that adds a slight clicking sound when the carousel is spun. This is recommended, but optional.As with any assembly that prints in multiple pieces and/or uses other components, actual clearances will be dependent on YOUR printer.&nbsp;<figure class="media"><oembed url="https://www.youtube.com/shorts/D3xfdgBf4jE"></oembed></figure>Print SettingsThe Nintendo Switch logo in the middle of the carousel is designed to give you two options:<ul><li>If you have an AMS, MMU or similar product, the logo can be easily painted in the slicer</li><li>If you do not paint it in the slicer, the logo will not appear at all</li></ul>&nbsp;Assembly Instructions<ol><li>Insert a 608 bearing into the center of the base</li><li>If you are using a spring, use a very small amount of glue to secure it into the hole as shown below</li><li>Place the carousel on top of the base, ensuring that the gear tip drops into the center of the bearing</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014299/design/2023-09-12_pikoqdkmfdj3.png"></figure> <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the pictures above:<ul><li>Bambu Lab Red Matte Scarlet Red PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li></ul>

pipboy

p1s stuff

cool stuff