projectbodypro

EricYC

<h2>让人直观地看到打印机仓温，完美契合小米温湿度计2</h2><h2>现已发布2.0版本，无需拆卸即可更换电池</h2><h2>Allowing users to visually see the printer&#39;s internal temperature, seamlessly integrated with the Xiaomi Temperature and Humidity Meter 2.</h2><h2>The newly released version 2.0 now features battery replacement without the need for disassembly.</h2><h2><a target="_blank" href="https://makerworld.com/zh/models/203845#profileId-223986" rel="nofollow noopener">小米温湿度计2打印机仓温检测2.0 Xiaomi Mi Temperature and Humidity Monitor 2 For Bmabu 来自 EricYC - MakerWorld</a></h2>

小米温湿度计 舱温检测 Xiaomi Cabin Temperature Monitoring

marker

PaulBB

<h4>Update 6th May 2023:</h4>Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few things to the model:<ul><li>A stopper that stops the drawer from beign pulled out completely. Designed in a way that you do not need any supports or extra prints.</li><li>Made the whole drawer about 2 perimeters thicker (0.8mm) (except the bottom). It is way sturdier that way. This was also needed to keep the stopper machanism working. Otherwise the whole drawer bent too much when pulling it all the way out.</li><li>Added an alternative version without the handle, but with just a hole to install your own (maybe 3D printed) handle yourself. The hole has a diameter of 4.2mm to install handles with a M4 screw.</li><li>Added a middle piece to join multiple drawers together</li><li>Added versions without the grid in the bottom.</li></ul>I am also currently working on some inserts which I will upload in a few days. &nbsp;<h2>Under Desk Drawer</h2>This model is designed to fit underneath your desk, providing easy access to your pens, papers, notebooks, and other essentials. Features a smooth sliding mechanism to ensure that your items stay secure and within reach. Plus, it's easy to install with the three mounting holes on each side. (I installed it with two on each side which works just fine.)The size of the bottom plane is approximately 166mm (width) x 176mm (depth) x 30mm (height).The slides are just mirrored versions of each other.Supports only needed for the drawer handle.Fits a 200mm x 200mm print bed.&nbsp;<h2>Installation</h2>This is the way that worked best for me, there may be better ways to install the drawer. Feel free to comment if you find a easier way :)<ul><li>Mount the slide that you plan to use as the outer-most first. Install one screw, align the slide perpenticular to the desk and install the second screw for the first slide. </li><li>Take the drawer and hold it a against the slide. Take the next slide and press it against the drawer where it should be. Install the back screw first and then the second one.</li><li>Repeat for each middle slide you plan to use. The middle slide has the same dimensions as a regular slide, so you can reuse the holes if you want to make it bigger later.</li></ul>Use two 3mm Screws per slide to mount the drawer to your desk. Be careful to not overtighten the screws as it may break the mounting holes depending on your material/print settings!

Under Desk Drawer

Stag 3D

Banksy Balloon Girl silhouette artwork. &nbsp;Simple and quick print.

Banksy - Balloon Girl

Dekoracje

Zion Wang

AMS DryPods for Xiaomi Temperature and Humidity Monitor Clock 2Xiaomi Temperature and Humidity Monitor Clock 2 is a cheap solution to watch the condition inside AMS.&nbsp;AMS的干燥盒，前置接口适配小米温湿度计2，测试PETG成功打印。

AMS DryPods for Xiaomi Temperature and Humidity Monitor Clock 2

dla Bambi

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

gadgets

3D Print Tech Design

Are you also doing your dishes by hand? Well I do and i got really tired of drying my cutlery by hand and i had nowhere to place them...So I designed this elephant, inspired by Peleg Design.It uses a channel and angle on the inside to let water flow outwards from the snout of the elephant. Prints best with solvable materials (PVA + PLA for example). The inside is OK without support, but the legs are right now a mess to remove PLA if you use only 1 extruder. I will update this shortly!<figure class="media"></figure><h3> Print Settings</h3>Printer:Flashforge DreamerRafts: <div>Doesn't Matter</div>Supports:YesResolution: <div>0.1-0.3</div>Infill:10-15 Notes: <div>You can use a single extruder and get good result! I printed with Orbi-tech PVA as support material, solved in cold water overnight.</div><h3> Post-Printing</h3>Clear coat = waterproofUsing 2-3 layers of clearcoating (quite excessively on the inside) the model is fully waterproof and all the water left on the cutlery, channeling it out from the snout.<h3> How I Designed This</h3>Designed using 3ds Max<h3> Custom Section</h3>See how everything was made!Category: Kitchen & Dining

Dish Rack - The Drying Elephant - Dish Dryer Rack

Dla Rodziców

happyboard.company

Download the print profile with 3 plates, if you want to print the version with the hidden LED adapter!&nbsp;Three versions of a swirled lamp shade for the Bambu Lab LED Hardware Kit. A small one as a single version and a large lamp shade in two versions. One hides the LED adapter, one does not hide the LED adapter.&nbsp;Prints easy with the 0.2mm PLA profile, only make sure to print the model upside down and set seam to random for a better look.

Lamp shade Swirled for LED Kit

lamp

babodad

I wanted to print a Minecraft Cube Lamp for my son but all the models I found were unnecessary complicated to DIY.So I created this Cube that just requires 3 parts printed and a 37mm LED Tealight (e.g. <a target="_blank" href="https://amzn.eu/d/5PgrcwV)" rel="nofollow noopener">https://amzn.eu/d/5PgrcwV)</a>:<ol><li>Craft Block (I used Bambu PLA Metal)</li><li>Base with Clips for 37mm TeaLight (based on <a target="_blank" href="https://makerworld.com/en/models/56034#profileId-57593)" rel="nofollow noopener">https://makerworld.com/en/models/56034#profileId-57593)</a></li><li>LightBox (Print with transparent PETG oder Glow-In-The-Dark Filament)</li></ol>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;