pritteegood

CippyO

I made this simple oil barrel for my 1/35 Orlandoo rc Jeep, as a scale accessory. Created a "solid" one, and hollow one, with a lid. this has a real 6 ccm capacity! so you can drink shots from it! or you can fill it with some micro scale goodies, or accessories.Easy to print, no support needed, you can print it with 0.2 mm layer height, or even with 0.1, it does not matter.Category: R/C Vehicles

1/35 scale oil barrel 

modeling

Mc2.project3D

Progettato con Fusion 360, stampare con ugello 0.2mm&nbsp;Può diventare un simpatico portachiavi&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000439225/design/2024-04-22_616c133024c92.png"></figure>&nbsp;

Mini hexagon toys (print in place)

point2

camillabertrand

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #11 (0.96mm) swap to Latte Brown At layer #15 (1.28mm) swap to Beige for the rest.&nbsp;You can scale the model up to 200x200 mm. Don't change the height

Hueforge - Dragon

Upcrid

Hello friends, today on my profile I wanted to bring a sanding tools, I hope it comes in handy and especially that you are satisfied.&nbsp; “10/03/2024” Small update, recommended by the user @Law_rra, now you have the various numbers to match the paper that you will mount on the piece.&nbsp;Good press friends

Sanding Tools with Number

Tools

Galactic Armory

Print your own scale model ARC Clone Trooper!&nbsp;&nbsp;This model comes in 2 pre-exported scales - 1:12 and 1:48&nbsp;&nbsp;The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!&nbsp;&nbsp;Find 9 other poses for this figurine with alternate heads on my Patreon for a limited time:<a target="_blank" href="https://patreon.com/galacticarmory" rel="nofollow noopener"> https://patreon.com/galacticarmory</a>

ARC Trooper Figurine 

Figures

agepbiz

Projectvideo:<figure class="media"></figure>I have been having fun playing a lot of Red Dead Redemption 2 lately, so I made a Cattleman Revolver Display Model to honor the game. This is a non functional model made for cosplay or decoration purpose. The Cattleman Revolver from Red Dead Redemtion 2 is based on the Colt Model 1873 Single Action Army Revolver (The Peacemaker)The filament used in this project was provided to me by Fiberlogy: <a href="https://fiberlogy.com/" rel="nofollow">https://fiberlogy.com/</a> FiberSilk Silver for the gun and Easy PLA Onyx for the gripSubscribe or follow me on Instagram: <a href="https://www.instagram.com/agepbiz/" rel="nofollow">https://www.instagram.com/agepbiz/</a> Twitter: <a href="https://twitter.com/agepbiz" rel="nofollow">https://twitter.com/agepbiz</a><h3>Print instructions</h3>Print the parts as oriented raft and support: barrel - raft and support, ejector - support, frame - support, gate - none, grip - support, grip frame - support, hammer - none, pin - raft and support, plugs - none, trigger - none

Cattleman Revolver - Colt Model 1873 Single Action Army Revolver

Cosplay

RETIRED GUY 3D PRINTING

ANOTHER DRAGON STANDTHIS ONE A LITTLE MORE COMPLEXLARGER BASE TO ADD GRASS, TREES ETCPRINTED ON BAMBU LABS X1 CARBONPRINT FILE WORKS 100% NO ISSUESTHANKS FOR LOOKING AND GIVE THE OLD MAN A LIKE

CRYSTAL DRAGON ARTICULATED -SNAKE DRAGON STAND

Cool

Slowpoke's Workshop

nice Santa decoration for door way

Christmas Santa corner hohoho and merry Christmas 

Xmas

Dunkelziffer

Of course I don't know if this is a universal fix or just for my own specific AMS issue. So I would really appreciate if other AMS owners with the same problem try this fix and give a feedback here.&nbsp;You need to attach the print with a small stripe of double sided tape! &nbsp;As many other AMS owners, I had the very annoying problem that in 80 % of the time the filament jamms at the retraction on slot 3. It doesn't matter which spool or what brand or kind of filament I had used, it was always the same. I printed several different fixes, changed the internal PTFE tube and double checked the motor unit. Nothing. Then I noticed, that when I disconnect the long PTFE tube on the back of the printer, which heads into the hub on the other end, and press play on the display, the filament is pulled back without problems. Getting curious about that, I moved the coupled PTFE tubes a bit away from the printer by hand when the AMS was about to chance the slots. For my surprise, the filament retraction worked every time I did that. So I designed a simple chock with a 45° angle to push the tubes a bit away from the printer and secured it with a small stripe of double sided tape. And what should I say... I've printed several quick and dirty designed test cubes with many color changes, and now, after more than 100 successfully retractions on slot 3 without any issues, I'm quite sure my problem is gone. I don't know why, but it works.&nbsp;Update: Ten days and several hundred filament changes on slot 3 later, and not a single retraction issue.&nbsp;

Simple AMS slot 3 retraction issue fix

Printer

SabreDesign

A modern fruit bowl, 228mm long, 253 mm wide and 66mm high If you want to support me or get a commercial license you can join a patreon membership: https://www.patreon.com/SabreDesign See the images below and my profile for more designs:<img src="https://makerworld.bblmw.com/makerworld/draft/836552/2023-11-05_460ac1e480838.png"> <img src="https://media.printables.com/media/prints/637891/rich_content/920480cf-f213-4859-a431-d8e5982e8b05/thumbs/cover/800x600/png/tree-ornament-03-43.webp"> <img src="https://media.printables.com/media/prints/637891/rich_content/93175b34-f8ab-49d7-b3f2-33af84f091cc/thumbs/cover/800x600/png/modern-vase-01.webp">&nbsp;

Modern Fruit Bowl

Home

3DPrintCraft

This is my latest remix of the puzzle maze. Difficulty: 8 Pieces: 2 Printed in PLA Silk for that nice shine. The Box aligns perfectly when closed. It looks like a secret box. Add a note inside or slip some money inside as a gift to someone. Please note the solution before closing, in case you have trouble opening it after. Do never force movements or the inner nobs may wear/break. It should be a smooth motion or you are on the wrong path. Like this? Check out my other Maze Puzzles: Mini Maze Puzzle (Heaps of fun!) <a target="_blank" href="https://makerworld.com/en/models/62959" rel="nofollow noopener">https://makerworld.com/en/models/62959</a> Large Piggy Bank Maze Box: <a target="_blank" href="https://makerworld.com/en/models/58615" rel="nofollow noopener">https://makerworld.com/en/models/58615</a> Golden Gift Box - Small Maze Box: <a target="_blank" href="https://makerworld.com/en/models/51912" rel="nofollow noopener">https://makerworld.com/en/models/51912</a> Enjoy!

Puzzle Maze with knurled style. 

Gifts

TuLuForge

TKP001 Holocron

Light

PenolopyBulnick

These faceted diamond cut out were designed to work with multi-colored filaments. The pair need to be oriented on the bed so they are facing opposite directions if you want to get teh full effect of the different colors. &nbsp;I also found they look nice with a fuzzy skin so I recommend giving that a try.