printmanufaktur

squinn

<p>A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for <strong>quicker drying</strong>, and includes a strong built-in latch to help secure the case closed when you're ready to travel.  <strong>Three sizes</strong> are provided to accommodate bars of soap that are up to 28 mm thick (small), 34 mm thick (medium), or 40 mm thick (large).  All sizes will allow for a bar of soap that is up to 100 mm long and 65 mm wide.</p><p>&nbsp;</p><p>This is a fully <strong>print-in-place design</strong>, and no supports are needed.  I had no trouble printing this using default settings using the regular flat print sheet, but note that this model requires decent bed adhesion to prevent the curvy shapes from coming loose during the first few layers of the print (and, so, textured sheets may be problematic).  Also note that the small version will even fit on a smaller print bed (such as the A1 Mini) if you rotate it by 40 degrees.  Happy travels!</p>

Sturdy Curvy Soap Box

print

chiz_m

<h3>The most <span style="background-color:rgb(255,255,255);color:rgb(5,5,5);">effective, ergonomic and easy-to-use PTFE release tool for the A1 – the EZ A1 PTFE Release Tool!</span></h3><p><strong>*** For best results, please see Tips for Success section ***</strong></p><h3>If you find that this tools works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3><p>PTFE tubes on the A1 AMS Lite hub is difficult to remove. Per the Bambu wiki, one has to press down the locking ring with a tweezer in order to remove the PTFE tube. I find it too fiddly and I&#39;m afraid that constantly doing so will eventually cause the gantry to sag and affect alignment.</p><h3>SOLUTION</h3><p>Design an ergonomic tool that will allow easy release of the tube without pressing the entire hub down using only one hand while allowing the other hand free to pull the PTFE tube.</p><h3>FEATURES</h3><ul><li><strong>Stable and efficient </strong>- less prone to errors as tool attaches to the hub preventing accidental sliding</li><li><strong>Easy to use</strong> - Designed with the best user experience in mind! Operate the tool comfortably and naturally by squeezing the thumb and index fingers together</li><li><strong>Less damaging to the printer</strong> - during operation of the tool, stress is limited to the filament hub only and not to the entire gantry</li></ul><h3>PRINTING DIRECTIONS</h3><ul><li>Choose between the <strong>default profile</strong> (better print quality) or the <strong>vertically-oriented profile</strong> (recommended for smoother operation) which makes the layers on the thumb press perpendicular to the layers of the clamp part which allows for smoother sliding action.</li><li>Use <strong>rigid filaments</strong> such as regular PLA, PLA+, ASA, ABS, etc. <strong>DO NOT USE matte or silk PLA</strong> as these filaments are soft and do not provide strong layer adhesion.</li><li>Print as oriented.</li><li>Comes with built-in supports. No need to turn on supports.</li></ul><h3>TIPS FOR SUCCESS</h3><ol><li>If you find the tubes still very hard to pull out, <strong>try pressing the tube down slightly</strong> to allow the metal locking teeth to release before pulling the tube out.</li><li>Make sure that you have the thumb press <strong>aligned in the corner and that it&#39;s pressing only one ring at a time</strong>. Otherwise, if it&#39;s hitting other rings, you might not be pressing the ring down enough.</li></ol><h3>HOW TO USE</h3><p><strong>IMPORTANT: Tool is not meant to be permanently attached to the printhead</strong> as it will prevent filament tangle detection to work. Remove the tool after use.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392785/design/2024-04-27_283930b7afd63.png"></figure><h3> </h3>

EZ A1 PTFE Release/Remover Tool

bambu lab

SartorialGrunt0

<p>This is a remix of a few popular daedric armor busts from thingiverse. I did not create or design these models but remixed a combination of all three to create a single combined model of the Daedric Armor Bust with the alternative base. The model and images are curtesy of the following links.</p><p>&nbsp;</p><p>-Daedric Armor Bust - <a target="_blank" href="https://www.thingiverse.com/thing:2314205" rel="nofollow noopener">https://www.thingiverse.com/thing:2314205</a></p><p>-Alternate Base Model - <a target="_blank" href="https://www.thingiverse.com/thing:3702791/files" rel="nofollow noopener">https://www.thingiverse.com/thing:3702791/files</a></p><p>-Combined Model - <a target="_blank" href="https://www.thingiverse.com/thing:4194980" rel="nofollow noopener">https://www.thingiverse.com/thing:4194980</a></p><p>&nbsp;</p><p>&nbsp;</p><p>Concessions:</p><ul><li>It needs alot of supports</li><li>It will take a very long time to slice if you print for maximum detail.</li><li>It gives some warnings about the mesh having gaps. The slicer resolves this for you.</li></ul><p>This is a very cool model but print at your own risk.</p>