PrintBros

Kevvv-3D

A Redesign of my first 3D model. I wanted a simple tv design that could easily be printed in 1 go with zero support needs. Simply use superglue in the insert for the TV stand. Or, you can skip that step if you want to “mount” the TV. This was designed for my daughter's barbie house but it can be used for any idea!&nbsp;Features<ul><li>Very clean and easy to print</li><li>No supports needed</li><li>Quick to print</li><li>Designed for easy assembly</li></ul>Suggestions and feedback are always welcome! I am new to the 3D Design world and always learning new best practices in design and always open to criticism to improve my designs.&nbsp;

Doll Size TV/Monitor v2

Bramberg 

Longracks Labs

Bambu profile of <a target="_blank" href="https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%202x2%20Three-Bay%20Nipper%2C%20Stripper%2C%20Plier%20Rack-67528" rel="nofollow noopener">https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%202x2%20Three-Bay%20Nipper%2C%20Stripper%2C%20Plier%20Rack-67528</a> with Bambu PLA Matte

Gridfinity 3 Bay Nipper Plier Holder

Gridfinity

Head Concepts

FlexiMeasure is a cutting-edge innovation in precise measurement tools, designed to simplify and enhance your measuring experience. This adjustable tool is a must-have for anyone seeking efficiency and accuracy in various measuring tasks.Key Features:<ul><li>Comprehensive Measurement Options: FlexiMeasure is equipped to handle a wide array of measurements, including 1/4 tsp, 1/2 tsp, 3/4 tsp, 1 tsp, 1/2 tbsp, and 1 tbsp. It effectively replaces the need for multiple separate measuring tools.</li><li>Sleek, Innovative Design: The half-cylinder shape of FlexiMeasure, coupled with its sliding divider, allows for quick and precise adjustments to any desired measurement. Simply align the slider to the mark, and your measurement is set.</li><li>Easy Maintenance: Designed for convenience, FlexiMeasure can be easily disassembled, ensuring a thorough and straightforward cleaning process. It is also dishwasher safe, adding to its practicality.</li><li>Versatile and Reliable: FlexiMeasure's robust construction ensures reliable and consistent measurements, regardless of what you are measuring.</li><li>Space-Saving Efficiency: The compact design of FlexiMeasure makes it an ideal tool for those looking to save space without compromising on functionality.</li><li>Environmentally Conscious: By consolidating multiple tools into one, FlexiMeasure not only reduces clutter but also promotes a more sustainable and eco-friendly approach to your measuring needs.</li></ul> Elevate your measuring experience with FlexiMeasure – your essential tool for precise measurements. Get yours today!

FlexiMeasure: The Ultimate Adjustable Measuring Spoon

Küche 

KG3Dee

Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>Please use designer print profiles as these are the only ones that are always up to date.&nbsp;Also, check out this in an <a target="_blank" href="https://makerworld.com/en/models/396440#profileId-297756" rel="nofollow noopener">AAA version</a> and the <a target="_blank" href="https://makerworld.com/en/models/198851#profileId-219450" rel="nofollow noopener">AAA Mechanical Battery Dispenser Slide</a>.&nbsp;Printed model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul><li>Main parts. 0.2mm layer height:<ul><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.&nbsp;1.<ul><li>Insert the lever in the casing. There is a slotted hole in the casing which needs to line up with the lever pin. Push to insert, and rotate multiple times both ways until the rotation is more or less friction free.</li><li>Repeat steps above for the other side.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_39cb8ba348c5c.png"></figure><figure class="image image_resized" style="width:16.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-16_696d5b597a4e5.gif"></figure>&nbsp;2.<ul><li>Insert the inner stoppers on both casings, protruding inside the lever groove, and insert the mid plate. The plate will keep the stoppers locked in place.</li><li>Do the same for the front stoppers, and insert the front plate.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_5da3f8c4a6d3c.png"></figure>3.<ul><li>Insert the handle. Check that the handle can move freely up and down.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_03b3c1c458c53.png"></figure>4.<ul><li>Insert the springs. They should be inserted as shown in the pictures, with the pin at the lowest point.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_28498c0d0830b.png"></figure><ul><li>Tension the springs and put the pin in the lever.</li><li>Insert the lower stiffener (Top in below picture).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7320db61e4d09.png"></figure><ul><li>Insert spring guides as shown. The flat one is friction fit into the cut-outs on the mid plate. The spring center one is dove-tailed.</li><li>Check the handle movement after this step, make sure it moves to its end (top) position by itself.</li></ul>5.<ul><li>Check the quality of the threaded bolt.</li><li>Use the printed tool to hold the leveling knob. Rest the bolt against a table and carefully, with no excessive force, turn the screw while holding the tool until it snaps free. Once free there should be minimal play in the axial direction. Do this for all knobs. If the knob is stuck, try the 0.2mm tolerance version.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_411dce1e012b4.png"></figure><ul><li>Trial fit the knob bolts in the guide rail threads. There might be some initial friction here, so enter the threads and turn a few degrees, then back again, then gradually increasing the turn for each go back and forth until the thread is completely set. Be patient here, don't use excessive force.</li></ul>6.<ul><li>Push in the leveling knobs in the casing. There is a slot in the knob and in the casing that should match up.</li><li>Use the printed tool, and twist the knob clock-wise until it sets. No need to overtighten. For the lower one you have to push the handle down to gain access.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-03-17_5afc523ed3444.png"></figure><ul><li>Insert the guiderail on the opposite side of the casing, and screw in the bolts. Do a couple of turns for all, then go back and gradually tighten in multiple goes until all bolts are seated. The guiderail and its position is what keeps the batteries rolling smoothly down when loading the dispenser. Too wide and the batteries will fly out, too narrow and the batteries will jam.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7ac74cca77c45.png"></figure>7.<ul><li>Final step is to install the last 2 stiffeners.</li></ul>&nbsp;Width adjustment:<ul><li>To widen the gap, turn the bolt clock-wise.</li><li>To narrow the gap, turn the bolt counter-clock-wise.</li><li>Start by turning all the bolts on full turn counter-clock-wise.</li><li>Grab your battery and insert it in the dispenser and hold it in front of the leveling knob. Adjust the knob so there is minimal play in the battery's axial direction. Continue this for all knobs.</li><li>Once done, release the battery from the top and observe its rolling down the slide. Adjust where necessary and your done.</li></ul>&nbsp;&nbsp;I advice using the original (designer) profiles, as these always have the latest changes incorporated.&nbsp;Would appreciate some feedback if this dispenser works with your batteries, or if you have any issues.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

AA Mechanical Battery Dispenser

Christians Spaßecke

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

A1 Upgrades

Mc2.project3D

Con questo modello si fanno questi test:-overhang-tollerance-hole-bridge-walls-diameter-meausures-text<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/822284/2024-03-26_2977e6744d7b6.png"></figure>&nbsp;&nbsp;&nbsp;Test Overhang:-Una torre a sbalzo con gradazioni differente: 15°, 30°, 45°, 60° e 75°-Una torre a sbalzo con gradazioni differente: 10°, 20°, 30°, 40°, 50°, 60°, 70° e 80°&nbsp;Test Tollerance:-con sei differenti offset vediamo lo scorrimento fra materiali, la tolleranza è stata applicata al pezzo base quindi i 5 componenti sono tutti uguali fra loro.test 0.05mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm e 0.30mm&nbsp;Test Bridge: (generatore pareti “Arachne”)-un test è basato sulla distanza che varia da 10mm a 50mm con misure intermedie di 20mm, 30mm e 40mm.-il secondo test è fatto per le singole linee a sbalzo. (vedi nella mia bacheca troverete la mia bellissima farfalla)&nbsp;Test Hole:-abbiamo diversi fori, sia rettangolari che cilindrici.partendo dal rettangolo 2x10mm a 3x12mm e 4x14mm, finendo dal cilindro da 2mm, 3mm, 4mm, 6mm e 8mm&nbsp;Test Diameter:-tutti con parete da 1mm abbiamo i cilindri da 4mm, 6mm, 8mm e 10mm&nbsp;Test Wall:-con 5 pareti differenti partendo dalla parete più esterna andando alla parete più interna, lo spessore delle pareti e di 1.00mm, 0.8mm, 0.6mm, 0.4mm e 0.2mm&nbsp;Test Meausure:-3 misure da10mm, 20mm e 30mm di X Y Z.&nbsp;Test Text:-con 5 diverse misure sia in estrusione positiva che negativa abbiamo le seguenti misure di test: 1.4mm, 1.6mm, 1.8mm, 2mm e 2.2mm&nbsp;Spero di esservi stato utile, date un&#39;occhiata alla mia bacheca troverete cose interessanti.&nbsp;Buona Test Stampa da MC2

Test Printe 

benchmark 

SlowEvo

Update 10/23: Added compact versions. See description below for details.&nbsp;Display infill patterns!&nbsp;This is based on <a target="_blank" href="https://makerworld.com/en/models/17918#profileId-16641" rel="nofollow noopener">my original model</a>. The first one was pretty basic and I wanted the text to look better so I decided to remake it. I&#39;m including profiles for multicolor and single color.&nbsp;This version is a bit bigger than the first one in order to have larger text. 198 x 146 x 9.8. Lightning is included this time around which printed stringy in one out of the three I printed, I don&#39;t know why. Adaptive Cubic is still not included since it won&#39;t show its adaptivity properly. I put Archimedean Chords and Octagram Spiral closer to the center to better show how they should look.&nbsp;Compact versions now available!Compatible with A1 mini. TheBear uploaded a great print profile for this, check it out if you’re an A1 Mini user.&nbsp;The main differences:<figure class="table" style="float:left;"><table><tbody><tr><td>Multicolor Model</td><td>Dimensions(rounded)</td><td>Filament total/flushed*</td><td>Filament changes</td><td>Print time</td></tr><tr><td>Original</td><td>198x146x10</td><td>144.58 / 9.05</td><td>28</td><td>3h36m</td></tr><tr><td>Compact</td><td>174x118x6</td><td>78.57 / 7.83</td><td>17</td><td>2h12</td></tr><tr><td>Difference</td><td>24x28x4mm smaller</td><td>66.01 / 1.22</td><td>11</td><td>1h24m</td></tr></tbody></table></figure>&nbsp;*Flushed amount will vary depending on filament type and colors used.&nbsp;&nbsp;&nbsp;&nbsp;<figure class="table" style="float:left;"><table><tbody><tr><td>Single Color Model</td><td>Dimensions(rounded)</td><td>Filament total</td><td>Print time</td></tr><tr><td>Original</td><td>198x146x10</td><td>132.49</td><td>2h46m</td></tr><tr><td>Compact</td><td>174x118x6</td><td>68.66</td><td>1h39m</td></tr><tr><td>Difference</td><td>24x28x4mm smaller</td><td>63.83</td><td>1h7m</td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Colors are changed by objects and modifiers. When using the traditional way to paint it sliced funky.&nbsp;If you download the STL or change settings otherwise make sure you choose Arachne as the wall generator.&nbsp;The overall shape of each infill block is based off of <a target="_blank" href="https://makerworld.com/en/models/28189" rel="nofollow noopener">this model</a>.

Bramberg

Gridfinity

Küche

Christians Spaßecke

A1 Upgrades

benchmark

printer info graphics