Preacher

Hiro Koiso Racing

Modular Filament rack with low profile casters  Works really well for maximizing storage capacity in limited space.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020127/design/2024-01-11_1e513f1540157.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020127/design/2024-01-11_a131f1646fe9b.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020127/design/2024-01-11_108c67bcc1845.gif"></figure> This model is based on  <a target="_blank" href="https://www.printables.com/model/403853-filament-spool-rack-stackable-glueless" rel="nofollow noopener">Filament Spool Rack - Stackable - Glueless</a><a target="_blank" href="https://www.printables.com/@ihateu3_593067" rel="nofollow noopener">by ihateu3</a> Glue-less dovetail joints on the original design is a great feature. Added features: Flatten Bottom of the frame to add 1&#34; ball casters.  <a target="_blank" href="https://www.harborfreight.com/1-inch-roller-ball-bearing-67060.html" rel="nofollow noopener">https://www.harborfreight.com/1-inch-roller-ball-bearing-67060.html</a><figure class="image"><a href="https://www.harborfreight.com/1-inch-roller-ball-bearing-67060.html" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020127/design/2024-01-11_be2f5b7f510cb.jpg"></a></figure> Casters are secured by #8x¾&#34;length Teks screws or equivalent #8 ¾&#34; length self tapping screws.  Redesigned upper frame to add extra tier with less material. End caps are optional for finished look. As the original design suggests, use 1/2 &#34; EMT electrical conduit for bars. I cut them for 28.5&#34; which make a rack hold 10 SUNLU filaments per tier.  The one described in above holds 30 spools.  You can add extra tier to go taller, cut EMT conduit longer to make them wider or both.  If the space is extremely limited, you can make them single tier and narrow also.You can adjust size of filament rack to whatever suit your need. Instruction:<ul><li>You need to print 2 of each frame components plus 4 dwells and 12 end plugs to make a complete set of rack.   </li><li>If you are not using casters, print extra middle frames instead of the bottom ones. raised bottom keeps rim of spools from touching the floor.   </li><li>PLA, PLA+ or PETG would be sufficient for this model  </li><li>Minimum 4 wall thickness and infill 25% or higher.  </li><li>No glue required. Tap frame pieces together with rubber mallet.</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme>Happy Printing!

Rolling Filament Rack - Modular

Gadgets

Pro3DTinkering

To support my projects and gain access to a Commercial License, please consider joining my <a target="_blank" href="https://www.patreon.com/Pro3DTinkering" rel="nofollow noopener">Patreon</a> community. Your support helps bring more creative designs and exclusive content to life!&nbsp;I&#39;m happy to introduce you Infinite Hexagon v2.0 | Triangles the redesigned version of my previous <a target="_blank" href="https://makerworld.com/en/models/69564#profileId-74882" rel="nofollow noopener">Infinite Hexagon</a> fidget. Thank you for your feedback which allowed me to make the model even better!&nbsp;Please check the assembly instructions on my <a target="_blank" href="https://www.youtube.com/watch?v=jaSH712f_fI" rel="nofollow noopener">YouTube channel</a> or in the video below:&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=jaSH712f_fI"></oembed></figure> Feel free to comment and share your prints; it&#39;ll be nice to see them. I would appreciate any feedback!&nbsp;Thank you,Happy Tinkering!

Infinite Hexagon v2.0 | Triangles

Toys

Mad Mart Malloy

This is a simple click together hexagon tile system for wargaming. This set includes the base tiles. I will also be uploading tiles for water, hils, trees and other terrain.&nbsp;Tiles can be printed whatever colour you want, to suit the scenary that you want to create. The tiles are 1.25" (across flats) these can be scaled within Bambu Studio to suit whatever size you require. To print at the scale you require use the following equations… For a specific tile size in mm: Scale = Size you require (in mm) x 0.0315For a specific size in inches: Scale = Size you require (in inches) x 0.8&nbsp;Tiles are best printed with the top face facing down using a 0.2mm nozzle. I would recommend using matte PLA or PLA+ I have had good success with eSun and Overtune brand filaments.Here is a link to a document that I use to plan out terrain. <a target="_blank" href="https://drive.google.com/file/d/12dtdUg05lbpIZbjlf1bX6EfirNfgcfjg/view?usp=sharing" rel="nofollow noopener">https://drive.google.com/file/d/12dtdUg05lbpIZbjlf1bX6EfirNfgcfjg/view?usp=sharing</a>I will shortly do a YouTube video to show how to use this.

Gadgets

Toys

hex terrain