phillip.bueno

One Blade holder

bensen

The (imo) versitile OneBlade Wall Mount (for <a target="_blank" href="https://amzn.to/3RB7ycq" rel="nofollow noopener">Philips OneBlade Face & Body</a>). Precisely modeled for tight tolerances for friction fitting multiple accessories onto a space saving wall mount (pressure fit/interference fit).<h3>No supports needed.</h3><ul><li>This OneBlade wall mount adapts to your needs:<ul><li>It fits up to 8 blades but each of the “regular” blade slots can be fitted with an optional “holder” (seperate model, can be found twice on Print Plate 2) to mount accessories like “skin guard (<a target="_blank" href="https://www.philips.co.uk/c-p/QP310_50/oneblade-face-plus-body-kit" rel="nofollow noopener">QP610/50</a>)” and “body comb (<a target="_blank" href="https://www.philips.co.uk/c-p/QP310_50/oneblade-face-plus-body-kit" rel="nofollow noopener">QP610/50</a>)”.</li><li>All slots are “regular” slots except the top right one used for the nose trimmer.</li></ul></li><li>The model also offers a dedicated mount for an “OneBlade Comb (<a target="_blank" href="https://www.philips.co.uk/c-p/CP1789_01/oneblade-comb" rel="nofollow noopener">CP1789</a>)”</li><li>Additionally it also sports a holder for<ul><li>an “OneBlade Protective cap (<a target="_blank" href="https://www.philips.co.uk/c-p/CP1787_01/oneblade-protective-cap" rel="nofollow noopener">CP1787</a>)” (top left slot),</li><li>as well as this <a target="_blank" href="https://amzn.to/3tztgFO" rel="nofollow noopener">Nose Hair Trimmer</a> (top right slot; see picture).</li></ul></li><li>To attach this holder to a wall (or in my case cabinet door), I recommend adhesive strips such as <a target="_blank" href="https://amzn.to/486JjK6" rel="nofollow noopener">Tesa Powerstrips</a>.</li><li>Please note: Spare blades are not held in the individual slots by their two stems (highlighted red in the picture below; which tend to bend and break easily) or the round “transmission” in the middle (also red), but rather by their base plate (green) via friction, as it is more robust. Therefore slightly pushing a blade into the slot will hold a blade in place by creating friction between the base plate and the raised edge of a slot.</li></ul><figure class="image image_resized" style="width:45.15%;"><img src="https://makerworld.bblmw.com/makerworld/draft/419926/2024-01-18_a48cb40bcb6f3.jpg"></figure><h3>Printing Guide:</h3><ul><li>I recommend (have tested) PLA, PLA+. PETG should of course work as well.</li><li>0.20mm layer height works well, printed with 0.4mm Nozzle.</li><li>No more than the default 2 walls. You don't need more. The more walls you print, the more issues with accuracy and friction fitting you will have.</li><li>Default order of walls (inner/outer).</li><li>Gyroid Infill 15%.</li><li>I highly recommend printing the “test model” first to check tolerances, accuracy and the calibration of your printer. If your printer is well calibrated, the printed wall mount should hold everything even when held upside down (see picture)</li></ul>&nbsp;

One Blade holder

RV Stuff