petrflorian1987

Matthew Ghost

NEW IMPROVED VERSION <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener">TILT PHONE STAND V3.0</a>&nbsp;The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.<ul><li>Designed for printing completely without supported!</li><li>You will need glue (Superglue for plastics). It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.</li><li>Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.</li><li>Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2023-12-16_fe804a401913c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2024-01-10_dac2c51f4fc07.jpg">

K tisku