petimorgen97

LordBoos

<p>Scary Halloween Mansion - HueForge.</p><h4><strong>Printing instructions:</strong></h4><p>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.</p><p>Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers.<br>Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings.<br>If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm</p><p>You can use same filaments as I did, or you can experiment with your own.</p><p>Don't forget to upload a make!</p><h4><strong>Filaments Used:</strong></h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA Gratkit Gray Transmission Distance: 1</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4><strong>Swap Instructions:</strong></h4><ul><li>Start with Black</li><li>At layer #20 (1mm) swap to Blue Gray</li><li>At layer #35 (1.6mm) swap to Gray</li><li>At layer #38 (1.72mm) swap to White for the rest.</li></ul>

Litho/Hugeforge