pccustoms1

wotfan

I recommend printing with a .2mm nozzle at .14mm layer height.&nbsp;The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive)

Multicolor TMNT Michelangelo Magnet

TMNT

lindh3d

I designed this to be printed without support and as one piece.It will take about 1kg of plastic and over 24 hours to print. But I think this is a super nice practical print to have at home or in the garden or when camping etc…&nbsp;Made a small update to my print-in-place portable stool. I also made an instruction video on how to open it up the correct way without breaking it or cutting it open.Perfect print to use up all those leftover spools with just a few grams of filament on.The weight limit is not tested to its full potential.My weight is 85kg and a friend of my have tested it and his weight is 90kg. No problem at all. I guess it will be able to withstand 120-150kg if you sit perfectly in the center and don't wiggle on it <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t80/1/16/1f92a.png">. It's a print-at-your-own-risk thing <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t83/1/16/1f60e.png">&nbsp;Rekommended printsettings:0.4 nozzle4 Parimiters0.16 layer height15-20% infill gyroid5 top/bottom layersSupport yes : Snug Support from build platePrint mode: Arachne&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/PND58IzI9xc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/PND58IzI9xc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/VZa5Ko11Rl0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/VZa5Ko11Rl0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;EDIT: 231003More pegs for more weight support.0.1mm z offset for rings. this will make them tighter at first when printing making for easier and successful print. But more force when using the stool the first time is needed.&nbsp;EDIT: 231005 Added an extra chamfer on the inside ring to be able to take more force when disassembling the first time.&nbsp;EDIT: 231022 Larger holes on the top and bottom part for larger fingers :)Removed support for holes, new design can now use regular snug support for the top holes&nbsp;EDIT: 231203 After requests, I have now made a smaller kids version. This will also fit the A1 mini printbed size.

Portable stool (twist an sit)

Furniture 

svest1466

Gobble gobble! Ready or not thanksgiving is coming up. Make this wonderful 100mm coaster or easily scale it up for wall art the next piece to show off to your family or friends. Separated into 6 different colors, but able to print in 4 and still look good.

It ain't gonna stuff itself turkey coaster and wall art

Thanksgiving

CrexisEnnex

Create your own version of the Enterprise D Conference Lounge - on your refrigerator! &nbsp;I’ve remixed magnet-compatible versions of the Enterprise D’s Conference Lounge ships display, but have also provided what you need to update it to all on-screen canon Prime universe Enterprises.&nbsp;The ships are all to scale* relative to each other. You could print most of these on a smaller printer - I originally scaled these for my old Ender 2 with a max diagonal lengfth of 225 for the Enterprise E. Then Picard S3 aired and there is no way I could rescale for the F (Jesus that thing was huge!) without rendering everything before the B unprintable. Thus, if you want to print the F on a small printer, you’ll need to cut and rejoin it.&nbsp;Each model includes magnet cutouts that can accommodate 2-3 small, high-strength magnets; I sized the cutouts to use <a target="_blank" href="https://www.amazon.com/gp/product/B09SW9BQ2D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">these 5x2 mm magnets from Amazon</a>, and most ended up inserting securely with pressure and no glue. You could also just apply a magnet strip across the indents instead.&nbsp;ISSUES TO NOTE: <ul><li>*For the STS Orbiter, I couldn’t fit the magnet indents without breaking through the outer layers, so that one’s roughly 10% larger than it would be if it were accurately to scale. I hope you can forgive me. </li><li>FYI: I have not yet personally printed the space shuttle or the F and G, but I used the same process to make those models as I did the others. Once I get around to printing a whole new batch, I'll update the photos.</li><li>The nacelle pylons are ultra thin and fragile on the NX-01, the 1701, the 1701-A, and surprisingly also on the 1701-E. Be gentle when separating supports.</li><li>Since these are all sloping hulls that taper gently, finer layer heights of .12 or .08 will yield much cleaner prints.</li><li>I’ve had mixed results getting the tops of nacelles to print cleanly, especially where there’s fine line detail like on the D. I might recommend a smaller .2mm hotend to address this.</li></ul>Credit due: Just like on my Printables version of this model set, these are remixed from Thingiverse and Printables models: mostly ShannDeMann’s “<a target="_blank" href="https://www.thingiverse.com/thing:3485751" rel="nofollow noopener">Star Trek USS Enterprise Ultimate Collection - Wall Variant</a>”, which is itself remixed from Solid_Alexei’s fantastic “<a target="_blank" href="https://www.thingiverse.com/thing:1423364" rel="nofollow noopener">Star Trek USS Enterprise Ultimate Collection</a>” I’m also remixing CoopTread’s “<a target="_blank" href="https://www.thingiverse.com/thing:3060746" rel="nofollow noopener">Enterprise-D Observation Lounge</a>” for the CVN-65 model. More recently: <a target="_blank" href="https://www.thingiverse.com/thing:1423267" rel="nofollow noopener">Solid_Alexei’s STO Odyssey Class</a> for the Enterprise F, <a target="_blank" href="https://www.thingiverse.com/thing:6074019" rel="nofollow noopener">Cmanyeet77’s Constitution III</a> for the Enterprise G, and <a target="_blank" href="https://www.printables.com/model/248456-space-shuttle-sts" rel="nofollow noopener">Swooshie’s Space Shuttle STS</a> for the STS orbiter.

Enterprise Magnetic Wall Display from Star Trek

Star Trek

Romwba3D

A fan art of both of the Knockers from the Cult film the Labyrinth , these are fully working and also have a slot for wall Mounting in the back of the model &nbsp;I have uploaded 3mf Print profiles for the X1C/P1P however they will also fit on the A1 Mini&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Labyrinth Models available on the patreon including Ello worm, ludo and Hoggle&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Labyrinth Knockers

Labyrinth

3Dimension Customs

SUPER NICE spinning keychain rack with 608 roller bearing for smooth spinning operation. Tight tolerances for sturdy construction. Each tier uses one bearing prints in 3 plates spins beautifully and doesnt wobble when weight is not centered.

Spinning Keychain Display (Stackable with bearings)

Keychains

ShearLab

This is a really great design by GLeZz on Printables that was uploaded on Feb 11 2022. I've printed this twice on my BambuLabs printer with excellent results.&nbsp;You can place any mobile phone on the stand, eat nuts and enjoy!

Snacks serving bowl with waste compartment and phone stand

Sports

IK3Digital

Boom! Big reveal! I turned myself into a statue!This 3d model represents Rick Sanchez alcoholism and depression problems.I have used @Chaoscoretech Rick. I completely cut the model and did a new pose for this purpose. I think it came out great!If you like this model don't forget to check out my Patreon, where you can get access to my whole catalog of premium Stls, over 160, and be able to sell them with a Commercial license: &nbsp;<a href="https://www.patreon.com/IK3D" rel="nofollow">https://www.patreon.com/IK3D</a>&nbsp;For more cool designs, check out my whole collection of models here: <a href="https://cults3d.com/en/users/IK3D/creations" rel="nofollow">https://cults3d.com/en/users/IK3D/creations</a>Enjoy!

Rick The Thinker - Rick and Morty

Rick n Morty

Madness3D

Decorate your home or bedroom with these amazing wall decorations.&nbsp;All Models have been added in a Large, Medium and Small version. PS! (Small is very small)**(Small models are now hidden, the can be made public on request if users want smaller models than medium.)&nbsp;There is a print profile for printing all medium models on the same print plate.If you want more of one model just add the amount in the Copies field when printing.&nbsp;&nbsp;&nbsp;&nbsp;

Glow in the dark - wall decorations

Decor

RestoreDoctor

Update 15.10.2023New Top - less support requiredNew Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of 17mm&nbsp;Size: diameter 100mm height about 170mmOrientation of the parts see below!Settings:<ul><li>0.20mm Standard</li><li>support needed</li><li>PLA / PETG</li><li>(Drill out the holes in the lid with a 3mm / 3.5mm drill no longer necessary with the new lid)</li></ul>Hardware:2x M3 x 16mm&nbsp;Orientation for assembling<figure class="image image_resized" style="width:41.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/459392/2024-01-27_f8ee382ab6fae.png"></figure>&nbsp;&nbsp;Orientation new Lid with auto tree support<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/b4050278-d3ce-4072-a017-8c2cc6f998de/thumbs/cover/800x666/png/lid.webp"></figure>&nbsp;I used a support blocker for the holes<figure class="image image_resized image-style-align-center" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/e1aebad0-5ed6-4458-ab45-2fcf73ab32fa/thumbs/cover/800x713/png/support-blocke.webp"></figure>&nbsp;support only necessary under the holes<figure class="image image_resized" style="width:357px;"><img src="https://media.printables.com/media/prints/561643/rich_content/1e8f177f-68ca-4c4b-aea7-4576dad39908/thumbs/cover/800x734/png/support.webp"></figure>&nbsp;&nbsp;&nbsp;

Mini Desktop Trash Can

Desktops Stuff

ice3Dprints

Rabbit wine bottle holder

Wine Holder

minivanbuzz

Après le présentoir à boucles d'oreilles, voici celui pour les colliers et les bracelets.Imprimé ici en PLA.

Support à colliers et bracelets

Displays

Diggle

Remixed version to fit a square Kleenex box (4.5" x 4.5") and fit on the X1/P1 build volume!!&nbsp;Shoutout to <a target="_blank" href="https://www.thingiverse.com/Crooked_Noozle" rel="nofollow noopener">Crooked_Noozle</a> for the amazing scan!

Moai Standing Tissue Box (Improved to fit X1/P1)

Dispensers

Black Glovz

I present you the Stoneisher!&nbsp;Will fit a big Clipper lighter or a big Bic lighter and 3/4 rolled cigarettes&nbsp;It can also keep smell inside and will float on water. So you are safe!&nbsp;You can use the filament change option in the slicer to customize the color .&nbsp;Only for personal use! not for resale.

Cigarette and Ligher Case Holder BIC or KLIPPER

Lighter cases

bensbigolbeard

<h2>An Icosahedron made of bevel gears.</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461626/2023-10-04_58621e1768a8e.gif"></figure>&nbsp;<h3>Assembly</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461626/2024-01-27_56dec3bf3a3588.gif"></figure><h3>Text Assembly Instructions:</h3>Some folks have had trouble following the video above (sry, it's not as clear as I'd hoped), so here are some alternate instructions. The image shows the process, working from top left to bottom right.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461626/2023-10-22_97301cb6256.png"></figure>Image 1<ul><li>The first image above shows two large gears attached to the core, with one small gear in between them.</li><li>Point the larger gears' pointed teeth straight up (i just took the pin out on the opposite side, so it could sit flat for the pic). These points are indicated in red in the image.</li><li>Looking at the small gear, locate the three sides of the small triangle on the back and make sure that the insets (indicated with red “V”s in the image) are angled to accept the larger gears' pointed teeth.</li><li>You should then be able to add the next large gear with the point up, like you see in the first image.</li></ul>Image 2<ul><li>The second image shows the model flipped over 180 degrees, sitting on flat of the small gear that was just on top</li><li>Stick on the last large gear to the pin pointed up (it can be in any orientation at first)</li></ul>Image 3<ul><li>Find an empty gear slot and point it upwards.</li><li>Orient the large gears so the points are now pointing up around the empty small gear slot, similar to their orientation in the first image.</li><li>Pop in the small gear, with those triangle corner inset areas accepting the large gears' points</li></ul>Image 4<ul><li>repeat the previous step until all of the empty small-gear slots are file</li></ul>That should leave you with everything in the correct arrangement! The pins will fully seat after the initial turns, so you might hear them pop into place. If you still encounter issues, I'm active in the comments and would be happy to help troubleshoot.&nbsp;Background: I love <a target="_blank" href="https://www.printables.com/model/245028-three-cube-gears" rel="nofollow noopener">this gear cube</a> and it made me want to explore how to apply that approach to other platonic solids. For some stupid reason I picked the Icosahedron and the additional geometric complexity kicked my butt days. It would have probably been easier if I could math good, but that's not the case… I still prefer how much the gear cube deforms so significantly in it's intermediate states, but the icosahedron is still a satisfying fidget. I might explore some alternative ways to break up the shape to introduce some more deformation, while retaining the smooth gearing. Printing notes:<ul><li>If the gears begin to get loose, replacing the pins with newly printed ones will likely tighten it right up.</li><li>To that end, printing the pins in a more friction resistant material and adding a bit of grease/lubrication can extend their life</li></ul>Print profile updates (for the ones I've uploaded): 10/8/23:<ul><li>Print order changed to outer/inner/infill for better dimensional accuracy</li><li>Brim added to pins for improved bed adhesion for most plate types</li><li>New pins only profile, in case you still have bed adhesion issues or need a fresh set, if the originals wear out</li></ul>10/22/23:<ul><li>I updated the stand-alone STL and 3mf files to include the brim and orientation tweaks from the previous update</li></ul>

Icosahedron Gears Fidget Toy

Fidgets

DonMatis

I present to you one of my favourites so far....the Biomechanical Skull!&nbsp;Highly recommend to print this with a tight brim and 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:<ul><li>PLA Overture Black</li><li>PLA Overture Chocolate Matte</li><li>PLA Overture Chocolate</li><li>PLA Overture Brown</li><li>PLA PolyTerra Peanut</li><li>PLA+ Esun Bone White</li><li>PLA PolyTerra Cotton White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #8 (0.72mm) swap to Chocolate Matte</li><li>At layer #10 (0.88mm) swap to Chocolate</li><li>At layer #14 (1.2mm) swap to Brown</li><li>At layer #18 (1.52mm) swap to Peanut</li><li>At layer #24 (2mm) swap to Bone White</li><li>At layer #28 (2.32mm) swap to Cotton White</li><li>At layer #40 (3.28mm) swap to White for the rest.</li></ul>

Biomechanical Skull

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/2023-11-29_8d14c8695d84a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/c6564a0c-3193-4ced-8e44-9405fcfbcfb3.jpg"></figure>A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/e5f6d4cc-3842-40ac-a7e3-cb275c3670fa.png"></figure><a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">Download the different tiles here</a> for the Enderman to carry around!_____________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________Easy-to-assemble, quick print, kit card of Minecraft Enderman in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>__________Thanks to the wonderful folks from <a target="_blank" href="https://sparta3d.ca/" rel="nofollow noopener">Sparta3D.ca</a> for giving me the opportunity to try their Chameleon and Galaxy PLA filaments! Great PLA filaments all around! I did my usual initial test print to make sure the filament are calibrated to meet the required clearances/tolerances of my mini figure models and got the kits printed in my first try! No bed adhesion issues, superb surface finish, no AMS jamming issues! All around great filament performance! Try their filaments today esp. if you&#39;re located in Canada!&nbsp;

Minecraft Enderman Mini Figure Kit/Keychain

Mine Craft

Waikikiprod

NEW VARIATION ! &nbsp;A printable fridge magnet without any support. Then just stick two magnets and you can give your fridge the style of a Viking!!!&nbsp;Choose the blade that matches the magnet you want to use ( d x h )<figure class="image image_resized image-style-align-right" style="width:30.96%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_h2bks6f0m5f6.jpg"></figure>Magnets : <ul><li><a target="_blank" href="https://www.amazon.fr/gp/product/B07GSNRY1M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=4ad34a6e8f15aa3f31ac519ac6464711&camp=1642&creative=6746" rel="nofollow noopener">10x2mm Neodym Magnet</a> (original 3D model)</li><li><a target="_blank" href="https://www.amazon.fr/SBS%25C2%25AE-magn%25C3%25A9tique-50-aimants-n%25C3%25A9odyme-extr%25C3%25AAmement/dp/B0187KV6BG/ref=sr_1_2?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=3VDRYDSPOHFLF&keywords=n%25C3%25A9odyme+12x2&qid=1658569332&s=kitchen&sprefix=n%25C3%25A9odyme+12x%252Ckitchen%252C752&sr=1-2&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=742e9ee30228836eef15c885b97edef6&camp=1642&creative=6746" rel="nofollow noopener">12x2mm Neodym Magnet</a></li><li><a target="_blank" href="https://www.amazon.fr/HHOOMY-Aimants-n%25C3%25A9odyme-Mini-aimants-r%25C3%25A9frig%25C3%25A9rateur/dp/B07Z8XRBNB/ref=sr_1_4?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=PPLS6XCE1ZNZ&keywords=n%25C3%25A9odyme%252B6x3&qid=1658570553&s=kitchen&sprefix=n%25C3%25A9odyme%252B6x3%252Ckitchen%252C128&sr=1-4&th=1&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=871c647ecafe9a8ccb1758d1a7676ccb&camp=1642&creative=6746" rel="nofollow noopener">6x3mm Neodym Magnet</a></li><li><a target="_blank" href="https://www.amazon.fr/Magnet-Expert-Ltd-mod%25C3%25A9lisme-lartisanat/dp/B004VRL0RK/ref=sr_1_8?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=2CM932BDDCN6R&keywords=n%25C3%25A9odyme+8x4&qid=1658569538&s=kitchen&sprefix=n%25C3%25A9odyme+8x4%252Ckitchen%252C77&sr=1-8&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=38034c5a51285ba7b68a106a3e19fe9c&camp=1642&creative=6746" rel="nofollow noopener">4x8mm Neodym Magnet</a></li></ul><figure class="image image_resized" style="width:48.54%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_if5qr6kf263a.png"></figure><figure class="table"><table><tbody><tr><td style="background-color:#fa6831;">Resolution :</td><td style="background-color:#f9cd4218;">0.2mm or less</td><td style="background-color:#fa6831;text-align:justify;">Support :</td><td style="background-color:#f9cd4218;">NO</td></tr><tr><td style="background-color:#fa6831;">Infill :</td><td style="background-color:#f9cd4218;">10% Gyroide</td><td style="background-color:#fa6831;text-align:justify;">Raft :</td><td style="background-color:#f9cd4218;">NO</td></tr><tr><td style="background-color:#fa6831;">Material / Brand :</td><td style="background-color:#f9cd4218;"><a target="_blank" href="https://www.amazon.fr/3D-Filament-Arianeplast-m%25C3%25A9talis%25C3%25A9-Fabriqu%25C3%25A9/dp/B01N4EVU75/ref=sr_1_2_sspa?keywords=arianeplast+pla&qid=1659350919&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSTkxBM1dNWE9UUzMmZW5jcnlwdGVkSWQ9QTAwNjU1MzNONlFJOU43STBTUiZlbmNyeXB0ZWRBZElkPUEwMTQzMzM0MVRQWDhYOEdSRzNOMSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=e8eea1100bd823814010947938a1b48a&camp=1642&creative=6746" rel="nofollow noopener">PLA / Arianeplast</a></td><td style="background-color:#fa6831;text-align:justify;">Filament Designation :</td><td style="background-color:#f9cd4218;"><ul><li><a target="_blank" href="https://www.amazon.fr/Filament-recycl%25C3%25A9-Arianeplast-fabriqu%25C3%25A9-France/dp/B084DCSDBK/ref=sr_1_8?keywords=arianeplast+pla&qid=1659350919&sr=8-8&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=daec5f7fb048f3d37b3ed039f5a3028e&camp=1642&creative=6746" rel="nofollow noopener">Black Recycled</a>♻</li><li><a target="_blank" href="https://www.amazon.fr/3D-Filament-Arianeplast-m%25C3%25A9talis%25C3%25A9-Fabriqu%25C3%25A9/dp/B01N4EVU75/ref=sr_1_2_sspa?keywords=arianeplast+pla&qid=1659350919&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSTkxBM1dNWE9UUzMmZW5jcnlwdGVkSWQ9QTAwNjU1MzNONlFJOU43STBTUiZlbmNyeXB0ZWRBZElkPUEwMTQzMzM0MVRQWDhYOEdSRzNOMSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=e8eea1100bd823814010947938a1b48a&camp=1642&creative=6746" rel="nofollow noopener">Metallic Aluminium</a></li></ul></td></tr></tbody></table></figure>thank you to the donors to whom I authorize the right to sell the object made by them :<ul><li>Tashaz3d ➡ <a target="_blank" href="https://instagram.com/tashaz3d?igshid=MjljNjAzYmU=" rel="nofollow noopener">Instagram</a> | <a target="_blank" href="https://www.tiktok.com/@tashaz3d?fbclid=PAAaarv2TNBeMWf6XZz1p2K_iWly4RSMFUd3SD2vknarsRdNJ_-_s9UQX4bpI" rel="nofollow noopener">Tiktok</a> </li></ul>&nbsp;Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Axe Magnet

Fridge Magnets

JamesThePrinter

Articulated monarch butterfly&nbsp;Approximately 140x103x8mm.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Articulated Monarch Butterfly

Articulating

RETIRED GUY 3D PRINTING

With all my printed dragons laying around I decided they should each have their own home to show themselves off, so i created this simple print.Prints with no supports2-3 walls, your choiceI used 25% infill for durability, you can use lessThere is a Bambu Lab 3mf, so if you want to add some colour help yourselfMulti colour will add many many hrs to the printSingle or tri-colour will print in about 4hrs depending on your infill choiceWall generator to ArachneIf you download and print please share a like with meThanks for looking

CRYSTAL DRAGON STAND

Dragons and Stuff

clockspring3d

I really love that 3D printing lets us create tools and solutions for anything and everything!If you're making a full-size box or picture frame, you'd use a mitre box or something similar. Cutting angles precisely needs tools and jigs, or things just don't look good. But what if you're a miniatures artist?That's where this miniature mitre cutting jig comes in! Sized to take a 1mm blade (e.g. standard utility knife), slots are arranged at 30, 45, 60 and 90 degrees.You might also be interested in <a target="_blank" href="https://www.printables.com/model/507966-mini-craft-corner-clamp" rel="nofollow noopener">https://www.printables.com/model/507966-mini-craft-corner-clamp</a>Have fun!

Mini Craft Miter Box

Tools Crafting

Kardes.Design

Update: Amazing 11 panel <a target="_blank" href="https://makerworld.com/en/models/61376#profileId-63895" rel="nofollow noopener">collection</a> done by <a target="_blank" href="https://makerworld.com/en/u/3946821223" rel="nofollow noopener">Superus</a> and also dozens of new panels are available in this <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">collection</a> Model&nbsp;I wanted to have a lamp that can be customized and changed while having a futuristic and modern look. The base model has a pattern that achieves an optical illusion as you can see in my Assembly video here. It's very simple with no glue or extra hardware.https://www.youtube.com/watch?v=gBAowd_ECU0&nbsp;I created this futuristic looking lamp with swappable panels that can be remixed with all your favorite characters or patterns. I will be adding more panels and will try to make custom panels upon requests in the comments. (New Dragon ball inspired collection released! <a target="_blank" href="https://makerworld.com/en/models/35292#profileId-32809" rel="nofollow noopener">https://makerworld.com/en/models/35292#profileId-32809</a> )&nbsp;I will upload the raw STEP file of the panels as a separate project for the community to remix as they wish.&nbsp;https://makerworld.com/en/models/31480&nbsp;Print Instructions.&nbsp;I have uploaded a 3mf files with the recommended settings and pre supported&nbsp;Main structure:&nbsp;Extremally low amount of support needed (Painted support)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_9915021e7ad94.png"><img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_0cbc2559b7af3.png">Layer height: 0.2Infill: 5%Walls: 2Bottom/top layers: 4Panels with built in light diffuser:<img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_8d8e06fd386be.jpg">The right panel has a built in light diffuser that is modeled as a separate object which can be changed in the slicer to a white filament using the AMS or by adding a pause and changing filament without an AMS. This type (Panel with built in diffuser) can accommodate more complex designs since the design does not have to be a continuously connected print like the example on the left. &nbsp;&nbsp;First layer width: 0.55 ( to make sure that the 2 layers of the diffuser stick together well)Layer height: 0.2Infill: 5%Walls: 2Bottom/top layers: 4&nbsp;Panel without diffuser:&nbsp;Very simple to print. Only requires the diffuser to be printed in vase mode separately. only one diffuser is needed for all 3 panels.Layer height: 0.2Infill: 5%Walls: 2Bottom/top layers: 4&nbsp;Diffuser:<img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_4796306e51b11.jpg">Print in vase mode with 0 bottom/top layers. It will work perfectly even if its not printed perfectly straight. like this wonky example here.&nbsp;Hardware:&nbsp;&nbsp;Only 2 parts are needed1: A power cord with a e27 attachment like the one i got here for 4 eurosthis attachment has a thread diameter of around 39.3 mm and an outer right of around 44 mm.The whole in the lamp is 40 mm so you just need the included cap to secure it. &nbsp;If you have other sized cords please let me know so that i can release more hole sizes.<img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_2ecf52b872678.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_4a4b4bc3753b6.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_84f981f479d4d.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/160978/2023-10-02_a658987c90106.jpg"> <a target="_blank" href="https://www.aliexpress.com/item/1005005164587104.html?spm=a2g0o.order_list.order_list_main.36.6d1979d2ai4Dj2&gatewayAdapt=glo2nld" rel="nofollow noopener">https://www.aliexpress.com/item/1005005164587104.html?spm=a2g0o.order_list.order_list_main.36.6d1979d2ai4Dj2&gatewayAdapt=glo2nld</a>&nbsp;2: A multi color bulb. I got one from a local store here for 4 euros but you can find them anywhere. they come with a remote or an app. I prefer the one with a remote like the one here.&nbsp;<a target="_blank" href="https://www.action.com/nl-be/p/3007108/multicolor-ledlamp/" rel="nofollow noopener">https://www.action.com/nl-be/p/3007108/multicolor-ledlamp/</a>&nbsp;Hi, I'm a student and an aspiring designer. I'm so grateful for the support I've received from people like you. Your support means the world to me, and I'm excited to share my work with you. You can find links to my donation pages below:&nbsp;<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86</a><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">https://www.buymeacoffee.com/KardesDesign</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Mystic lamp with swappable panels

Lamps and Lithophanes

Nakozen

The Imperial AT-ST “Chicken Walker” scouts ahead on the lush moon of Endor, seeking out any potentially rebellious individuals attempting to halt the Emperor's efforts. Fast moving and nimble for its size, and still extremely deadly with a half-decent pilot, it is not something you would want to be caught out in the open with, Jedi or not. Ohhh god is that a teddy bea--aaaarrghkk---!! This is a kit I've been wanting to make properly for a few years now, and finally sat down to give it a real attempt. I hope I have done it justice!-----------------------------------------------Some parts are super small, so some care is required. Additionally the kit should scale up just fine, although untested as of yet!On folding the main body panels, it is okay if one or two panels sheer off, it will still stick together, but if 3 or 4 fail, a little glue may be required for the roof piece! (If this is a big enough issue I may add another connection, I just wanted to preserve the top detailing.)Included is just the regular fit for the time being, try setting outer walls to print first.You can make it EVEN TIGHTER by increasing the Z-scale by 15%. For those uninterested in the card format, there is a frameless variant included! ------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive ------------------------------------------------------------My other Star Wars themed kits:X-WING - <a target="_blank" href="https://www.printables.com/model/143177-x-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/143177-x-wing-kit-card-redux</a> Y-WING - <a target="_blank" href="https://www.printables.com/model/289165-y-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/289165-y-wing-kit-card-redux</a> B-WING - <a target="_blank" href="https://www.printables.com/model/143174-b-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143174-b-wing-kit-card</a> TIE Advanced - <a target="_blank" href="https://www.printables.com/model/143178-tie-advanced-kit-card" rel="nofollow noopener">https://www.printables.com/model/143178-tie-advanced-kit-card</a> Valen-TIE/N - <a target="_blank" href="https://www.printables.com/model/393740-valen-tien-fighter-kit-card" rel="nofollow noopener">https://www.printables.com/model/393740-valen-tien-fighter-kit-card</a> Tauntaun - <a target="_blank" href="https://www.printables.com/model/143208-tauntaun-kit-card" rel="nofollow noopener">https://www.printables.com/model/143208-tauntaun-kit-card</a> V-19 Torrent - <a target="_blank" href="https://www.printables.com/model/143196-v-19-torrent-kit-card" rel="nofollow noopener">https://www.printables.com/model/143196-v-19-torrent-kit-card</a> Tri-Fighter - <a target="_blank" href="https://www.printables.com/model/143197-tri-fighter-mini-kit-card" rel="nofollow noopener">https://www.printables.com/model/143197-tri-fighter-mini-kit-card</a> Looking to try your hand at making your own Kit Card? Follow this simple guide to get a head-start! <a target="_blank" href="https://3dwithus.com/how-to-design-kit-card-models" rel="nofollow noopener">https://3dwithus.com/how-to-design-kit-card-models</a>------------------------------------------------------------<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a><h3>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a></h3>

AT-ST Walker Kit Card

Star Wars

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

Auto Accessories

Williams Industries

These look great on your door frame, I would suggest a little bit of adhesive putty like in the link below. This is a layered print and this is meant to be printed on a Bambu with AMS or Multicolor printer. Makes for great wall art, or you can scale it down and add a magnet on the back for a magnet.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Adhesive Putty: <a target="_blank" href="https://a.co/d/0SXex0u" rel="nofollow noopener">https://a.co/d/0SXex0u</a>

Halloween Decorations Door Art 8 Pack 

Halloween stuff

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>