Hugo

<h2>NEW : parametric with Fusion 360 and STEP files available <a target="_blank" href="https://makerworld.com/en/models/377006" rel="nofollow noopener">here</a></h2>&nbsp;I enjoy printing my own storage boxes, but I don't like to add extra hardware like screws. That's why I designed these boxes.  I developed a completely new closing mechanism utilizing the natural elasticity of the plastic for a satisfying snap-close.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Signal Blue</li><li>FormFutura Refill PETG Iron Grey</li></ul>&nbsp;<h3>How to choose your size :</h3>&nbsp;There are 36 different sizes available to accommodate your needs, with dimensions specified in the name of each STL file. The three numbers correspond to the inside dimensions of the box, the first one is the width, the second is the length and the third is the depth.For example, the "Box_bottom_60_60_50" describes the box with inside dimensions of 60mm x 60mm x 50mm :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_h9g3z0yeu3ti.jpg"></figure>The top has only two dimensions (width and length), which should correspond to the first two numbers of the bottom.For example, the "Box_top_60_60" will match the following bottoms :<ul><li>“Box_bottom_60_60_25”</li><li>“Box_bottom_60_60_50”</li><li>“Box_bottom_60_60_75”</li><li>“Box_bottom_60_60_100”</li></ul>The "Box_clip" is necessary for each box. The narrowest boxes will require one, while all the other boxes will require two.&nbsp;All the STL files are already oriented for optimal printing. I recommend PETG and infill of 15% or more.&nbsp;<h3>Assembly :</h3>&nbsp;The top and bottom snap fit together. To assemble them, just press them onto a table like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_oiifzqba65c6.jpg"></figure>It is important to assemble them with this specific orientation as a groove will aid in snapping them into place.I find it easier to assemble one of the two hinges first with a twisting motion, and then press the second hinge as described above.&nbsp;Then insert the clips with a twisting motion like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_t5kzv6lq2e4s.gif"></figure>When they are instaled, they are very sturdy and will hold the box closed as long as they are in place.Just make sure to install them with the right orientation to ensure easy box opening. The face that was on the print bed should be facing outward :<figure class="image image_resized" style="width:61.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_tte3p1m9l6jn.jpg"></figure>&nbsp;Enjoy :)

SnapLock Storage Boxes

JimmiboY - Youtube

Back with version 2 of the storage box system for ikea skadis. as you might have seen my first version that was stackable. this version fits side ways, and are stack able. and they come in diffrent sizes. Look for my other designs.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sCkYCk8ipaI?si=LPSb8c1VUgzuQoWe"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sCkYCk8ipaI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sCkYCk8ipaI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Ikea skadis Singlebox V2

Organizers

ZGremlin

*4/19/24 Update:  Added new print profile to accommodate extra wide spools, this new re-mix reduces overall width by 3mm. The easiest, simplest and most effective way to use cardboard spools in both the AMS and AMS Lite WITHOUT altering the original cardboard spool is here! After trying and failing to find a model that would allow me to use cardboard spools with both the AMS and AMS Lite I came up with this design to solve that problem! I had previously tried all of the alternatives but they all had their failings or prevented me from using them with the A1 Mini&#39;s (we have 2 of them so this was a frequent frustration!). This is the last spool solution you&#39;ll ever need!&nbsp;The spools are designed to utilize all of the space in an AMS slot. At 202mm they fit nearly ALL 3rd party cardboard spools. So far I&#39;ve successfully tested the following cardboard spools:<ul><li>3DHoJor</li><li>Aceaddity</li><li>Comgrow</li><li>Creality</li><li>Duramic</li><li>Elegoo</li><li>Eryone</li><li>eSUN</li><li>Jayo</li><li>Kinluot</li><li>Overture</li><li>OVV3D</li><li>Polymaker</li><li>R3D</li><li>Sovol</li><li>Sunlu</li><li>Yousu</li><li>Yoyi Yoyi</li></ul>&nbsp;<h2>Installation Instructions:</h2><ol><li>Print both a left and a right spool adapter<ol><li>If printing for AMS Lite compatibility, print the “OPTIONAL AMS Lite Right Spool Adapter” instead of the Right Side Adapter</li></ol></li><li>Lay the left side adapter on a flat surface</li><li>Place your cardboard spool over the left side adapter threads, center it as closely as possible</li><li>Place the right side spool adapter into the left side adapter threads</li><li>Continue threading the adapter until you achieve a tight fit<ol><li>Optionally, if you are unable to get a sufficiently tight fit you can use the snap peg to hook through a hole anywhere on the cardboard adapter.</li></ol></li></ol> I recommend using PETG, ASA or ABS to print these adapters. PLA+, PLA Meta or PLA CF should also work.&nbsp;<h3>Optional Accessory Instructions</h3>&nbsp;AMS Lite AdapterThe purpose of this adapter is to allow users to seamlessly use Universal Spools between an AMS and an AMS Lite system without removing the Universal spool.&nbsp;To use the adapter, first remove the <a target="_blank" href="https://store.bambulab.com/products/ams-lite-rotary-spool-holder" rel="nofollow noopener">Rotary Spool Holder</a> from the AMS Lite. With the spool holder removed, first insert the adapter through the “OPTIONAL AMS Lite Right Spool Adapter” then slide the spool onto the AMS Lite slot. The adapter has a connector at the end of the tube, slightly rotate the adapter to get it to lock in.&nbsp;Snap HookThese are designed to add additional connection points to stubborn cardboard spools. These have a small tip that can be inserted through a hole or opening in the cardboard spool that will catch when the spool rotates. This should enhance the grip of the cardboard spool.&nbsp;Snap SpacerThe snap spacers are designed to offer additional grip for narrow cardboard spools. These can be easily modified and increased in height if needed. Print at least 4 or 5 of the same height spacer and space them out evenly in the spool to create a tight fit.

Ultimate Cardboard Spool Adapter |AMS Lite Compat.

AMS Lite

eifel3druck

This rope planter is perfect for your small succulents and cacti. Wood-Pla gives a natural look.&nbsp;Size: <ul><li>inner diamter: 5,7 cm</li><li>inner depth: 5,5 cm</li></ul>You have the possibility to scale it up to your needs in the slicer.

Rope plant pot

Bowls and Baskets

agepbiz

New and updated dual color Poker Chips with numbers&nbsp;Video:<a target="_blank" href="https://www.instagram.com/reel/CyELN-1NfcM/" rel="nofollow noopener">https://www.instagram.com/reel/CyELN-1NfcM/</a>&nbsp;Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>

Dual Color Poker Chips With Numbers

Toys

Kevbot.

This is the second part of the Valentine&#39;s Day drop.&nbsp;It is shaped like a rose, and it fits in the palm of your hand. It&#39;s print in place and has holes for magnets to keep it securely closed. It also has a cut-out for a ring on the inside, and the neat part is that it will fit a wide variety of ring sizes without them falling out.&nbsp;The ring will stay in place because of a separate spring that pushes against the ring to keep it from moving around. -This spring is printed separately and needs to be inserted mid-print (I&#39;ve included a stop for it in the 3MF file, along with stops for the magnets). *see photo for more details&nbsp;This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon <a target="_blank" href="https://www.patreon.com/kevbot_3d" rel="nofollow noopener">https://www.patreon.com/kevbot_3d</a>&nbsp;You will need 16, 6 by 3mm Neodymium Magnets. These are the magnets I use if you are interested:&nbsp;60 Pack on Amazon: <a target="_blank" href="https://amzn.to/47pQFaj" rel="nofollow noopener">https://amzn.to/47pQFaj</a>100 Pack on Amazon: <a target="_blank" href="https://amzn.to/3Sa8beg" rel="nofollow noopener">https://amzn.to/3Sa8beg</a>&nbsp;Have a great Valentine&#39;s Day!Sincerely,Kevin&nbsp;Disclaimer: Some links in this description may be affiliate links. This means I may earn a small commission if you click them and make a purchase. It&#39;s no extra cost to you, but it truly helps me to keep producing free designs. Thank you!

Rose Ring Box! (Print in Place)

Boxes

IndomReps

Be sure to read the different applications of the different tool holders below to make sure you are printing the correct model for your application. Please be aware that your filament brand, age, and print profile can affect the fit of your printed parts, if you have significant issues with fit consider trying a test print with a different roll or brand of filament.&nbsp;*** UPDATE 1 *** 2/14/24&nbsp;Received some feed back that the tool mounts will not work with tools that have the belt clips installed on them. I never considered this in the original design since I typically take them off my tools. I have made 2 options available so those of you that use the belt clips can still use these mounts.&nbsp;The first option I simply increased the thickness of the mount and then hollowed out the back a bit to try and keep the amount of material used down a bit. I designed it in a way that it can be printed without supports and a little bit of bridging.&nbsp;The second option is a simple spacer that is printed separately and then placed behind the original tool mount. This is a good option for those of you who have already printed the original as it has a recess in so that the original mount can sit down in to keep the screw holes aligned. I intentionally designed this to be on the tighter side for fit so mileage may vary depending on what brand you use and your filament calibration. Comment if you do have fitment issues of the spacers so I know if I need to make more updates. &nbsp;Please note I have not verified this with every Dewalt tool available.                                                        &nbsp;Tool and Battery mounts for Dewalt 20v tools&nbsp;These things are nearly universal and will fit a good amount of the Dewalt 20v tools and is universal for all 20v batteries. They are also quite strong and have no issues supporting the weight of the ½" impact drivers weight and then some.&nbsp;Attach them to whatever surface you want with two #8 screws. Tool mounts are best used as under mount but they can certainly be mounted horizontally if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.&nbsp;There are 3 different print models for the tool mounts, choose which one best suits your needs.&nbsp;Dewalt Tool Holder: Base file, print these for tools that do not have the belt clips.&nbsp;Dewalt Tool Holder - Integrated Belt Clip Spacer: print these for tools that you want to consistently hang tools from that have belt clips on them. The skid plate is a bit thicker to allow clearance and I have hollowed out the back of it a bit to save on material usage. No support is needed for this print.&nbsp;Dewalt Tool Holder - Belt Clip Spacer: This is for previous users who printed the original and would like to be able to able to mount their tools that have belt clips, or users that want a more modular function.&nbsp;I've printed these in normal PLA and didn't have any strength issues but you can use PETG or Pro PLA if you want. If you want to use these in a work truck or something that can get really hot in warm weather you should probably use ABS otherwise its probably overkill.&nbsp;Default profile uses .2 layer height but bump it up for a faster print as layer height really doesn't matter for these. I've even printed these on ludicrous speed and had them still fit fine.

DJI

Organizers

AMS Lite

Bowls and Baskets

Toys

Boxes

Tools