patela2oh

Amao Chan

A hungry polar bear fails to reach the fish held in the naughty seal’s mouth. Everytime the polar bear tries to catch the fish, the seal will sink back into the water and tease the poor, hungry polar bear.&nbsp;In fact, polar bears are indeed always famished because of the worsening condition of the planet due to global warming, and the North Arctic has become warmer than usual. On top of this, the melting of the ice has shrunk the polar bears’ living area, and made it difficult for them to hunt. There are many signs telling us that polar bears and the polar ice caps are slowly disappearing.&nbsp;The design, Polar Bear with Seal, was a paper DIY for the magazine Young Scientist. I really liked the concept, so I redesigned it into STL files. I hope this piece of art can convey a sense of beauty both in motion and stillness. While I was designing this, I put a lot of effort into observing the subtle changes in the movements of polar bears. In order to make this design work via 3d printing, I adjusted every component’s angle. Very few parts require supporting material.&nbsp;Ultimately, this art piece took me the longest time to design, and it’s the most complex one I have ever shared. I am extremely happy with the outcome!&nbsp;<a target="_blank" href="https://youtu.be/2ga2XGnS2OA" rel="nofollow noopener">https://youtu.be/2ga2XGnS2OA</a> <a target="_blank" href="https://youtu.be/UWyBoHDMF1g" rel="nofollow noopener">https://youtu.be/UWyBoHDMF1g</a>&nbsp;Thanks to SpiderMaker for sponsoring the creation of this work.<a target="_blank" href="https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F" rel="nofollow noopener">https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F</a>&nbsp;Material used SpiderMaker PLA Matte Paper White/Matte Iron blue/Matte Steel Blue/Matte Orchid Purple/Matte Peacock Green/Matte Coal Black&nbsp;Print suggestions 1.Layer height 0.2mm 2.Low down the flow to 90%or 95%. 3.Add oil on moveable parts&nbsp;<a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a> <a target="_blank" href="https://www.facebook.com/paperworkers/" rel="nofollow noopener">https://www.facebook.com/paperworkers/</a>&nbsp;北極熊與海豹調皮小海豹從浮冰的縫隙中探出頭來，用嘴中叼的魚逗弄著北極熊；當飢餓的北極熊揮掌搶魚時，海豹總是快一步的把頭縮回海面下，看樣子吃不到魚的北極熊要餓肚子了。 事實上，北極熊真的是處於挨餓狀態中！全球暖化，北極氣溫不斷上升，造成北極的海洋冰層融化，使得北極熊的活動範圍縮小、食物變少、獵食變得困難，許多跡像顯示北極熊正和北極海冰同時消失中！&nbsp;《北極熊與海豹》這個作品，原本是我為《科學少年》雜誌所設計紙製DIY作品；我很喜歡這個有趣的構想，所以把它重新設計為stl的版本。我希望這個作品在動與靜都能呈現美感，所以在設計時，特別注意北極熊在姿態上的微妙變化。為了配合3d列印工具的特性，調整了每個零件的角度；只有很少數的零件，在列印時需要設定支撐。《北極熊與海豹》是我目前分享的作品中，耗費時間最多、設計難度最高，但最後的設計成果，我很滿意！&nbsp;感謝 SpiderMaker 織造者 贊助本作品之創作&nbsp;使用材料 SpiderMaker PLA 消光白色、消光鐵灰藍色、消光鋼青色、消光蘭紫色、消光暗綠色、消光黑&nbsp;製作建議 1.層高0.2mm 2.流量降到90-95 3.組裝完成後在移動零件加些潤滑油。

Polar Bear with Seal (automata)

Ainsley 

Mechengg

This is inspired by the “Annoying Gift Box” that most people (including my wife) have seen on TikTok.&nbsp;The size of the original is quite small, and the 3 different versions of it didn't give me exactly what I was looking for. I wanted a large internal volume (4"x4"x4"), and I wanted this to look like a Christmas present with zero visible screws. So obviously I spent far too much time modeling this up and figured that I would share it for free instead of charge people for it :)&nbsp;3 BoxesRibbon & Bow120 total screws&nbsp;You do need a few dabs of CA glue to hold the inner box posts in place. :) You can add glue for the white threaded part as well but it works without it&nbsp;Thanks for viewing, and take a look at my other models for things that I have designed for myself because the originals weren't exactly what I was desiring&nbsp;EDIT: I have also designed a bin with magnetic slide lid for storing the multitude of screws. 3 partitions to separate by color :)<a target="_blank" href="https://makerworld.com/en/models/82815#profileId-88321" rel="nofollow noopener">https://makerworld.com/en/models/82815#profileId-88321</a>

Gift Box w/ 120 Screws

Amish 

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

ToroSpin Turbo - Launcher with planetary gearbox

toys - Clayton

筋斗云の点线面

&nbsp;<a target="_blank" href="https://www.bilibili.com/video/BV15C4y1j7UF/?spm_id_from=333.999.0.0&vd_source=5de71fde39d0a93532c374c066ad3b38" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-11-15_85bb99b7989f8.gif"></a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_4e2237aad8575.gif"></figure>20240309更新：上传AMSlite装饰盖板stl（原始模型文件）&nbsp;<figure class="image image_resized" style="width:64.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2024-03-09_a404cbac01e9d.png"></figure>  这是专门为A1MINI小面积打印的设计版本，可以让AMS lite改成竖直放置，更简单方便换料操作方式，更小的占地面积，合理的后置进料管线布局，具体的组装说明和更多细节，点击上面gif进入视频页面。&nbsp;主要优化了：1.AMSLite的耗材穿线原来在底面，现在改成了正面可视，不用再盲操作了；2.减少了台面的占地面积，从原来长方形占地面积，变成了一个小方块；3.后面的耗材换料不用再碍手碍脚了，现在都在正面直接换料；&nbsp;另外侧面的螺丝来自AMSlite主体的对应孔洞螺丝，所以只需要放入底座前把螺丝拧下来，放上底座后再和底座一起拧上去就ok。&nbsp;来自deepl翻译：This is a specially designed version for A1MINI small area printing, which allows AMS lite to be placed vertically instead, simpler and more convenient way to change the material operation, smaller footprint, reasonable rear feeding pipeline layout, specific assembly instructions and more details, click the above gif to enter the video page.&nbsp;Mainly optimized:1. AMSLite's consumable threading was originally on the bottom surface, but now it has been changed to be visible on the front side, so you don't have to operate blindly anymore;2. Reduced the footprint of the countertop, from the original rectangular footprint, into a small square;3. The back of the consumables change materials do not have to get in the way again, are now in the front directly change materials;&nbsp;In addition the side of the screws from the AMSlite body of the corresponding holes screws, so only need to be put into the base before the screws down, put on the base and then screwed up with the base on the OK.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_ce097d54b5016.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_65897a89971a9.png"></figure>储物盒底座版本在这：👇（点击图片直达）The storage box base version is here:👇 (click on the image to go straight to it)<figure class="image"><a href="https://makerworld.com/zh/models/59700#profileId-61765" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-11-09_885dbb8dc2522.gif"></a></figure>&nbsp;&nbsp;

Ainsley

Amish

toys - Clayton

A1 Mini add ons