Papucchino

Eagle_92

<h4>Summary</h4>This is a fan-made model of the famous iron helmet from the Bethesda video game: TES V: skyrim.  We shaped the various details of the helm following the ones on the textures and on the normal maps in the game.  The helmet is shaped for a relatively large head, we invite you to follow this table to re-scale it according to your needs.  (NOTE: These values are only indicative, we invite you to take the measurements on yourself and scale it as needed). 94% = Small 97% = Medium 100% = Wide 103% = Extra Large&nbsp;Have a good printing time! By ilcorsaro92 from GliArtigianiDiAvalon Post-PrintingHOW TO COLOR:&nbsp;Just give a tick layer of Black plastic primer, then a Spray Chrome layer. Leave it Dry. Next day give a layer of dark metal spray. Once dried, you can scratch the dark color revealing the chrome from the previous layer. If you wish, you can put some rust in little spot around the rivets or the eyes.&nbsp;For the horns, use at least 3 different shades of sand.&nbsp;We suggest you to darken areas were 2 or more part are close together, in order to recreate a sort of Ambient Occlusion (use dry brush technique or airbrush).&nbsp;Final: Use a Clear Glossy transparent acrylic spray all over the helmet, leaving the horns matte.&nbsp;

Skyrim Iron Helm

cosplay

Kaleb08

This version is obsolete check out version two https://makerworld.com/en/models/172815#profileId-189819Infill, 20%holster v1 and v2 require minimal supportV3 requires no supports

Dummy 13 double Katana Holster

dummy 13

TBUILDER001

Vertebrae card holder

ANATOMY

the_bearded_jedi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Elegoo Blue Transmission Distance: 2.7 PLA Polylite Starlight Nebula Transmission Distance: 2.9 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA Overture Matte White Transmission Distance: 3.7 This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #10 (0.88mm) swap to Starlight Nebula At layer #12 (1.04mm) swap to Sunrise Orange At layer #15 (1.28mm) swap to White for the rest.&nbsp;If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation, or join my patreon for commercial rights and priority prints https://www.patreon.com/sblayeredcreations

Spooky Cats Hueforge