CBY Art

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo drawer module 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system.&nbsp;The usable dimensions of the drawer are 240x210x30. The drawer has space for 8x7 inserts. The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.&nbsp;It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.&nbsp;Furthermore, all inserts for the accessories and tools that the printer comes with are free. Only the special modules and inserts are only accessible to members of my club. The purpose of the club is to promote my work and to reduce the costs that I incur. I would also like to find people who are interested in expanding this system.&nbsp;The entire system uses only 1 type of screw, M3x8 countersunk screws.Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2023-09-20_95fdae0c8d181.jpg"></figure>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_ccadb89c071b7.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_c05e6d1cbb9c7.jpg"></a></figure>

[BaBo] organizer drawer module 30

[Babo]

雷布斯

ASUS router ZenWIFI AX6600 wall mount. Compatible with XT8/CT8/XT9

ASUS ZenWIFI AX660 Wall Mount

Home Networking Wall

Misterobots

<figure class="image image-style-side"><img src="https://media.printables.com/media/prints/427214/rich_content/fc6ef318-afce-47c2-895e-9e44aba57505/thumbs/inside/1280x960/png/gen2-parts-drawer-slim-double.webp"></figure>The Gen2 Parts Drawers are part of the <a target="_blank" href="https://www.printables.com/social/5751-jerrari/collections/201196" rel="nofollow noopener">GEN2 Modular Storage System</a> I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These parts drawers feature divided sections for storing small parts or screws and have room for placing labels for part identification. The slim drawers are half the height of a standard Gen2 drawer. Stacking 2 drawers achieves the height of 1 standard Gen2 Drawer.&nbsp;Originally designed for the <a target="_blank" href="https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr" rel="nofollow noopener">“Original Prusa i3 MK3 ENCLOSURE…"</a>, The Lack drawers have found their way on to many desks, workbenches, and other tables as well. Now with the Gen2's rail design you can quickly swap the storage units between work areas.<h3>Download the <a target="_blank" href="https://files.printables.com/media/prints/231288/other_files/3539795_bfc3106a-0ae3-424c-a0dc-ad181fa3bea0/gen2-interactive-pdf-101.pdf" rel="nofollow noopener">GEN2 Interactive Catalog PDF</a></h3><img src="https://media.printables.com/media/prints/427214/rich_content/cd934807-8e79-44e5-b0fa-a99b37ae0000/thumbs/cover/800x450/png/gen2-interactive-pdf-101.webp"><figure class="media"><div data-oembed-url="https://youtu.be/b8jgTIv3ctQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/b8jgTIv3ctQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Features: • Gen2 rails allowing quick and easier swap-ability and combinations of many Gen2 Storage System designs. • Lack Drawers also include optional slots for magnets allowing drawers to snap into place with a nice "Click". • Drawer stoppers keep your drawers from attacking your feet. • Designed for larger and easier to install wood screws over the original lack enclosure drawer design.HARDWARE • Screwdriver • Countersunk woodscrews: (Metric: <a target="_blank" href="https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/" rel="nofollow noopener">4x25mm to 4x16mm</a>) or (SAE: #6 or #8 up to 1" long) • Drill bit that is smaller diameter than the wood screws • Pen, Marker, or <a target="_blank" href="https://www.amazon.com/TEKTON-65731-Scratch-Punch-Awl/dp/B01BBLPPJW/ref=sr_1_3?keywords=Center+Punches+tekton&qid=1656263175&s=power-hand-tools&sr=1-3" rel="nofollow noopener">Scratch Awl</a> • Magnets (Optional): <a target="_blank" href="https://www.amazon.com/gp/product/B07KPX36YX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">10x5x2mm</a> or <a target="_blank" href="https://www.amazon.com/gp/product/B07CNBSMDZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">10x2mm</a> • M3 nuts • M3 Screws M3x6 - M3x10<figure class="table" style="float:left;width:78.97%;"><table class="ck-table-resized" style="border:1px double var(--input-border);"><colgroup><col><col></colgroup><tbody><tr><td style="background-color:rgb(250, 104, 49);border:1px solid rgb(191, 191, 191);padding:0.4em;text-align:center;vertical-align:top;" colspan="2">UPDATES</td></tr><tr><td style="background-color:rgb(0, 0, 0);border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;"><figure class="image"><img src="https://media.printables.com/media/prints/427214/rich_content/034d1c3f-db66-45ca-b4c5-f6c427f29397/thumbs/cover/800x516/png/image.webp"></figure></td><td style="background-color:rgb(0, 0, 0);border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;width:427.797px;">3/30/2023 Added new divided variations for Slim Double Wide Drawers. Please let me know if you'd like to see more. 👍</td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;INSTRUCTIONS <img src="https://media.printables.com/media/prints/278293/rich_content/1d8e0833-5d90-437b-b1ab-23db68d3deff/thumbs/cover/800x223/png/3-gen2-rail-standard.webp"><figure class="image image_resized image-style-align-center" style="width:535.5px;"><img src="https://media.printables.com/media/prints/231288/rich_content/5109e993-c9e8-46b3-b32c-6dd1eadecc2c/image.png"></figure>• Use templates to mark the hole locations on the surface you are mounting the desired sized rail to.• Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using.&nbsp;<figure class="image image_resized image-style-align-left" style="width:299.656px;"><img src="https://media.printables.com/media/prints/231288/rich_content/870df895-9dc9-4649-bafa-b3c46bca1c7f/image.png"></figure>• Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.• Install the rail using wood screws, use at least 4 screws on the outer corners to mount the single rail and and 6 to mount the double rail. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)&nbsp;&nbsp;&nbsp;• Prep the drawer case for installation:<figure class="image image_resized image-style-align-center" style="width:535.5px;"><img src="https://media.printables.com/media/prints/231288/rich_content/69f64e7e-00d9-41ef-8511-5cc098ea3554/thumbs/cover/800x484/png/image.webp"></figure>- Install optional magnets if desired NOTE: you only need to install at least one magnet, you can choose to install 2 stacked if you want more magnetism between the case and the drawer. Pay attention to polarity, they can be corrected later if needed.<figure class="image image_resized" style="width:535.5px;"><img src="https://media.printables.com/media/prints/231288/rich_content/0d405c94-a399-43b6-8ca7-04ac46159f7f/thumbs/cover/800x540/png/image.webp"></figure>- Install optional nuts in drawer case (these are only used if you are installing a shorter drawer beneath this drawer case.<figure class="image"><img src="https://media.printables.com/media/prints/231288/rich_content/124dd611-4cbd-483d-9c41-eff53e7681c8/image.png"></figure>- Install optional drawer stops by pressing them into place as they are friction fit. Pay attention to the orientation, notch facing down and towards the front to pass through the slot. The one labeled “L” goes on the left side of the case and “R” on the right side. (While facing the front of the case)&nbsp;• Slide the case into position until it either stops or lines up with the front of the rail. (If you feel any resistance you might need to clean up and plastic imperfections around the male or female rails.&nbsp;<figure class="image image_resized image-style-align-left" style="width:357px;"><img src="https://media.printables.com/media/prints/231288/rich_content/fbdb9605-ed6e-4dda-898e-bd85708a17cf/image.png"></figure>• Slide a rail lock into the rail found on the backside of the drawer case, slide all the way to the top until it buts up against the hole in the rail that contains the nut. Screw in place using a M3x8 or M3x10.• Prep the drawer, install the optional magnet, pay attention to the polarity. (If you need to remove the magnet you can use another magnet to pull it out of place or use a small Allen wrench or paper clip inserted into the hole below it.)• Insert the drawer by tilting in back when installing in order to pass by the drawer stopper notches. The drawer should now slide into place.• I guess you're all done unless you want to make more drawers :)<h4>Installing Drawers under each other</h4><figure class="image image_resized image-style-align-left" style="width:357px;"><img src="https://media.printables.com/media/prints/231288/rich_content/805f6aca-20af-4070-95dc-40d54eb83181/thumbs/cover/800x448/png/image.webp"></figure>• This is the same process as above but instead of mounting the "Rail Lock" into the nut on the rail you will need to slide a “Rail Lock Upper” into place on the back of the case above or if installing a shorter drawer line up with the hole in the case above it. NOTE: You can only install the same length or smaller drawer case under each drawer case.&nbsp;<h4> </h4><h4>Labeling Parts Drawer</h4>• Depending on what you are using the parts drawers for it might be worth the time to label each section, such as this example for M3 Screws.<figure class="image image_resized image-style-align-center" style="width:535.5px;"><img src="https://media.printables.com/media/prints/427214/rich_content/a8baa13a-99f7-463f-aecc-fdb6e9549610/thumbs/cover/800x600/jpg/pxl_20230319_141104468.webp"></figure>&nbsp;&nbsp;&nbsp;SHARING THIS SYSTEM WITH THE EXPLICIT PERMISSION AND REQUEST OF ORIGINATOR&nbsp;<h4>The user shared this model, but is not the original creator of it.</h4>&nbsp;<a target="_blank" href="https://www.printables.com/model/427214-gen2-parts-drawers" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/427214/images/3535376_2b059ae3-ba95-43ad-a620-b85051003f3a/thumbs/inside/1280x960/png/gen2-parts-drawers.webp"></a><a target="_blank" href="https://www.printables.com/model/427214-gen2-parts-drawers" rel="nofollow noopener">GEN2 Open Part Drawers</a>&nbsp;&nbsp;RECOMMENDED PRINT SETTINGSFilament: PLA (PETG or ABS for heavier duty storage) Nozzle Size: 0.4mm Print Height: 0.2-0.35mm Infill: 10-20%&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/427214/rich_content/630535d1-4dd7-4093-9c27-859135740c1f/thumbs/cover/800x600/jpg/pxl_20230319_143951629.webp"></figure>

GEN2 Parts Drawers (Standard and Slim)

GEN2 Module

myth.ethical.0c

An insert for the honeycomb storage wall that takes an M3 heatset insert. Hole size is 3.9mm however due to material shrinkage you may need to adjust by setting the XY Hole Compensation setting. I find that 0.16mm seems to work pretty well for PLA.

HSW - M3 Heatset Insert

Honeycomb Storage Wall

Allar3D

A minimalist, scandinavian vibe coat hook with hidden fasteners and quick install/remove.&nbsp;Assembly: Screw the base to the wall and slide the hook into the base. You can use double sided tape instead of screws.&nbsp;

Minimalist Coat Hook

Wall, Drawer and Storage Systems

KF Designs

This is the Tardis Lightbox from Dr. Who Television series. The profile works OK with my settings but you must check and dial in your Printer accordingly. I have reduce the first layer speed a bit further because there is some small letters in there. there is a hole on the back side to hang the Lightbox and a hole on the side for a USB-C adaptor … If you don't want to use the usb adaptor i have also included a small cap with a 4mm hole just to fit your cable in and another cap without a hole if you want to use a battery pack in it. Enjoy ! USB-C Adaptor :<a target="_blank" href="https://s.click.aliexpress.com/e/_DBngla9" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DBngla9</a> LEDs : <a target="_blank" href="https://s.click.aliexpress.com/e/_DnlApXf" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DnlApXf</a>

Dr. Who Tardis Lightbox 

TV Shows

Chris3DPrints

Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. &nbsp;I have attached the STL and STEP files incase you want to modify it.

Deburring Tool Holder for Multiboard

Multiboard

kk20100kk

Stick it with double sided tape under your desk to make them dissapear. Simply insert all the cables you want in the channel and the lip inside will prevent them from coming out. Fast print, no supports required and ease of use and install. Compatible with any cable size.I made them in different length so you can print the ones you need. You can also customize the length in the slicer by cutting them to the desired length.They are 50mm wide and 30mm thick with ribbles pattern.&nbsp;

Under desk cable organizer channel

Cable Organizers

ProfessorBoots

This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model specifically can then be connected to a ps3 controller. &nbsp;If you&#39;d like to support the channel and fund the development of these mini DIY RC projects consider becoming a ProfessorBoots Workshop member which will give you access to a step by step guide on sourcing the PCB&#39;s/Electronics and uploading the code to the development board. As well as pretty much everything else you may need to know in order to build your very own 3D Printed Mini Excavator.ProfessorBoots Workshop: <a target="_blank" href="https://professorboots.com/products/professorboots-workshop-pass" rel="nofollow noopener">https://professorboots.com/products/professorboots-workshop-pass</a>&nbsp;YouTube Video on Build: <figure class="media"></figure>&nbsp;

3D Printed RC Excavator

RC and Scale Models

dachu02

Xbox, PS controller stand.Very easy to assemble, only 6 parts.works good printed with PLA/PETG. For better footer friction it can be printer with TPU.&nbsp;Assembly with 16 M3x15 bolts (flat head recommended) or…can be also assembled with glue with fake bolts which can be printed.&nbsp;Headphone stand will be created soon to create nice set :)&nbsp;

pad controller stand Xbox play station PS4 PS5

Nintendo

mohammad

These are parts designed for a stand-alone frame for the AMS Lite to be top-mounted but not on the printer, in an attempt to eliminate the vibrations arising from movement of the AMS Lite system when loaded with 4 spools while the printer is running. The printable parts are designed for 1x2 inch legs and a 2020 t-slot bar on the top. The feet are connected to the steel legs using 4 M5 bolts that thread into rivet nuts on the legs.The shoulder parts also connect to the legs using M5 bols and rivet nuts. The current height of the legs requires longer PTFE tubes, but the height came out unnecessarily too tall.

AMS Lite Stand-alone Frame

AMS Lite and Filament

Ruvim KUB

<h2>Epoxy resin glue tray with spatula</h2>&nbsp;I tried to make all the walls very thin to save plastic. Also for a nice organization of my workspace I created an organizer that holds all the honeycombs.&nbsp;Also note that there are two types of trays. There are two types of trays: 3 mm and 5 mm, so choose the one that suits you best.&nbsp;I also intentionally created the skirt so that you can hold the tray with your fingers when stirring.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000427218/design/2024-04-13_3d287bca1f7fd.jpeg">

Epoxy resin glue tray with spatula

Arts and Crafts

K2_Kevin

If you&#39;ve designed a <a target="_blank" href="https://makerworld.com/en/models/415825#profileId-317989" rel="nofollow noopener">Maker Chip</a>, or chosen from the growing selection, here&#39;s a case for you!&nbsp;<ul><li>A rugged case with a pop-out liner that also serves as a display piece. Bring it to the next RepRap Festival, or Poker Game! Fully customizable! Holds Maker Chips and Poker Chips 40mm Standard.</li><li>Box is fully 3D Printed, no other hardware required.</li></ul>

MakerChip Storage & Display Box

Games

NxtGnPrtHub

English: Test the tread depth of your tires with this tread depth gauge. Also an ideal and inexpensive gift for workshops to pass on to customers. 1mm - 1,6mm (minimum tread depth - EU) - 2mm, 3mm, 4mm (winter tire - minimum tread depth, 5mm, 6mm. Would you like to use your own text? Then load the second print profile. Note: This print is only for professionals as everything is very tight. If your &#34;Filament Flow&#34; is not configured correctly, the middle object may not move smoothly! Deutsch: Testen Sie die Profiltiefe Ihrer Reifen mit diesem Profiltiefenmesser.Auch ein ideales und günstiges Geschenk für Werkstätten zur Weitergabe an Kunden. 1mm - 1,6mm (Mindestprofiltiefe! - EU), 2mm, 3mm, 4mm (Mindestprofiltiefe Winterreifen), 5mm, 6mm. Möchten Sie Ihren eigenen Text nutzen? Dann laden sie das zweite Printprofil. Hinweis: Dieser Druck ist nur für Profis da alles sehr eng ist. Wenn ihr &#34;Filament Flow&#34; nicht richtig konfiguriert ist dann kann es passieren, dass sich das mittlere Objekt nicht sauber bewegen lässt!

Tire depth gauge

Automotive

85kylestewart

If you're looking for 3/4" elbow PVC connections, you're in the right place! these are designed for elbows on schedule 40 PVC pipe fittings. and make connecting two pieces of pipe a breeze. Just insert the fitting inside the pipe and your good to go with a snug fit, reamended to use PVC adhesive. print settings:walls: 5infil: 10%infill pattern: gyroidsupports: yes- regular&nbsp;

3/4" PVC all elbow connections

PVC Parts

warlogh

As requested. Here is Larger Size single version Display Case for Big Figures or Die cast models.In this version of Display Case is made to be used with Glass (or Acrylic Glass) with size of 420mm x 290mm x 2mm like this one: <a target="_blank" href="https://www.amazon.co.uk/dp/B0932YWPWC/?coliid=I228NE09D6L9RV&amp;colid=ZOWX888JKNBJ&amp;psc=1&amp;ref_=list_c_wl_lv_ov_lig_dp_it" rel="nofollow noopener">https://www.amazon.co.uk/dp/B0932YWPWC/?coliid=I228NE09D6L9RV&amp;colid=ZOWX888JKNBJ&amp;psc=1&amp;ref_=list_c_wl_lv_ov_lig_dp_it</a>510pxIf this Display Case for You is too high and You are OK to cut Acrylic glass Then You can cut Corner Poles in size You need in a slicer program or ask me and I made separate Corner Pole model for You.Inner Compartment Size is 298x298x412mm. Can be reduced in height by cutting Corner Support Pillars in slicer.&nbsp;List of Parts and assembly schematics:<figure class="table" style="width:66.48%;"><table class="ck-table-resized" style="border:1px double var(--input-border);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;vertical-align:top;width:400px;">Bottom Base 4 x Split Parts of Base Platform (Print one 4 times) 1 x Centre Connection Ring 4 x Connector Pins (Print one 4 times)</td><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;text-align:center;width:270px;"><figure class="image image_resized" style="width:248.344px;"><img src="https://media.printables.com/media/prints/826466/rich_content/9052deb4-d088-406a-bdef-a362c1ab15a5/thumbs/cover/800x600/jpg/8-s.webp"></figure></td></tr><tr><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;vertical-align:top;width:400px;">Corner support Stands 4 x Top halves of stands (Print one 4 times) 4 x Bottom halves of stands (Print one 4 times) 4 x Connection stand Pins (Print one 4 times)</td><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;text-align:center;width:270px;"><figure class="image image_resized" style="width:248.344px;"><img src="https://media.printables.com/media/prints/826466/rich_content/65da11af-9b39-45c2-bda6-4a26df79e90b/thumbs/cover/800x600/jpg/6-s.webp"></figure></td></tr><tr><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;vertical-align:top;width:400px;">Top Support Bracket 4 x Split Parts of Support Bracket (Print one 4 times) 4 x Connection Pins (Print one 4 times)</td><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;text-align:center;width:270px;"><figure class="image image_resized" style="width:247.406px;"><img src="https://media.printables.com/media/prints/826466/rich_content/bcde6132-49cc-4a2f-9714-341897f63b3b/thumbs/cover/800x600/jpg/4-s.webp"></figure></td></tr><tr><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;vertical-align:top;width:400px;">Top Lid 4x Split Lid parts (Print one 4 times) 1 x Centre connection circle 4x Connection Pins (Print one 4 times)</td><td style="border:1px solid hsl(0, 0%, 0%);padding:0.4em;text-align:center;width:270px;"><figure class="image image_resized" style="width:247.656px;"><img src="https://media.printables.com/media/prints/826466/rich_content/1d486942-bd28-41ad-af72-b97732e174fc/thumbs/cover/800x600/jpg/5-s.webp"></figure></td></tr></tbody></table></figure>&nbsp;TIPUse a Glue putting parts together for stronger construction. Good idea is to use a bit of glue on ends of glass panels as well.&nbsp;You can Buy me a coffee if You feel good doing so :)<a target="_blank" href="https://www.buymeacoffee.com/warlogh" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/792937/2024-03-16_5923e8a1a0113.jpg"></a> <a target="_blank" href="https://www.buymeacoffee.com/warlogh" rel="nofollow noopener">https://www.buymeacoffee.com/warlogh</a>(And very big Thank You For interest in my work)

Large Display Case

Display Cases

guillaume76620

Lampe Stitch avec prénom enfant éclairée par ruban LED&nbsp;1- right click on text object → Modify text → Modify Name2- Left click on text object → Modify Z-high to 43- Left click on all object → Modify X and Z rotation to 1804- Slice and enjoy&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Qhhi2k0vvp0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Qhhi2k0vvp0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Sorry for my English level…

Lamp Stitch Name LED Lightbox 

Lamps

EDDIEB3D_

.2 layer height needed for best resultsColors usedElegoo BlackSunlu Yellow

Suspended Batman Logo 

String Art

ideat0m

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">More puzzle in my collections.</a> ---------------------------------------------------- Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a decoration. This particular puzzle has ten parts and I believe it will bring a lot of funBefore use, I recommend that you check whether the printed object has sharp edges, or tear them off with the help of a knife for pulling the edges or with sandpaper-------------------------------------------------&nbsp;------------------------------------------------------Vkládací puzzle umožňuje dětem rozvíjet jejich motoriku a orientaci v tvarech předmětů. Jednotlivé části se vkládají na své místo v obrázku. Díly do sebe krásně a jednoduše zapadají. Lze použít také jako dekoraci. Toto puzzle je tvoreno deseti dily a verim ze prinese spoustu zabavy.Doporucuji pred pouzitim overit zda vytisteny objekt nema ostre hrany, tyto pak pripadne strhnout pomoci noze na stahovani hran pripadne smirkovym papirem ---------------------------------------------------- <a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">Vice puzzle v moji collections</a>

Excavator puzzle for kids

Puzzles for kids

Dr Operator

Please do not add files from MINI 13 to any print profile you upload here. Mini 13 belongs to someone else. User's shouldn't be able to download MINI 13 from a profile on my model. By doing so, you'd be taking downloads away from the creator of that model. That's not OK.&nbsp;My first entry in the Mini 13 Machines category, AT-ST.I wanted to make something to highlight the versatility of the Mini 13 frame and I hope I've accomplished that.<ul><li>I've added tiny, custom supports to the Left Ear and Right Ear that are easily removed.</li><li>All other parts print support free.</li><li>If printing at 100%, I would suggest printing with a brim on the ears as they are pretty delicate</li><li>It depends on how you have your AT-ST situated, but mine stands about three inches tall when printed at 100%.</li></ul>&nbsp;This model includes ONLY my remixed armour parts.&nbsp;The pictures show my remixed armour on a Mini 13 frame.&nbsp;On top of downloading my files, you will need to download some of the <a target="_blank" href="https://makerworld.com/en/models/183758#profileId-202617" rel="nofollow noopener">Mini 13</a> frame parts. Below is a list of the frame parts and the amount you will need.&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:30.41%;"><img src="https://media.printables.com/media/prints/455662/rich_content/033b19d0-20f1-4a3d-9fc8-bb04284fd3f3/image.png"></figure>&nbsp;&nbsp;&nbsp;mini13-frame-head.stl x1 mini13-frame-waist.stl x1 mini13-frame-leg.stl x4 mini13-frame-arm.stl x2 mini13-frame-foot.stl x2 &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The “ears” are able to rotate and the “mouth” has a full range of movement as it attaches using the standard ball joint. The completed head assembly attaches to the frame the same way a regular Mini 13 head does.&nbsp;<img src="https://media.printables.com/media/prints/455662/rich_content/50b23b49-c54e-435e-bab2-f8993d9b9e25/thumbs/cover/800x806/png/image.webp">

MINI 13: Star Wars AT-ST 

Star Wars and Star Trek

Clay

Remix to an awesome model by Josh-3d&nbsp;Scaled 150% to fit M5 Hardware and has a wider shelf.&nbsp; I have a 10 Air and it is totally solid while using

Industrial Ipad Stand - M5 Hardware

Cell Phone Accessories 

vifzack

This is a simple and easy to print guitar holder. You just need two 5mm countersunk screws for mounting it to a wall or wherever you want.&nbsp;I recommend printing the “strength” version of the provided files since otherwise the cross section area might be too small and the holder will break when hanging a heavy guitar like a bass guitar on it. Also consider some tough material for printing altough PLA will work just fine (at least for me it did).&nbsp;

Guitar holder

Musical Instruments 

tejawood

<h2>Summary</h2>Needed to tweak the awesome hinges that oberkorn provided. Needed a flush fit to the Lack table enclosure here; <a href="/thing:1814763" rel="nofollow">https://www.thingiverse.com/thing:1814763</a>Used M2 Screws & Washers.(Uploaded individual files for each object, if needed.)<h2>Print Settings </h2>Rafts: No&nbsp;Supports: No Resolution: .20&nbsp;Infill: 20% Notes: Printed in PLA, but your mileage may vary based on your tolereances...

Lack Door Hinge

Ikea mods

RETIRED GUY 3D PRINTING

SIMPLE EASY PRINTVALVE STEM CAP.12 LAYERFITS SCHRADER VALVESCAR, BIKE, TRAILER ETC&nbsp;

BABY GROOT VALVE STEM CAP

Marvel

Lucky 13 Toys

<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;A new and redesigned display base for Lucky 13 and friends. Featuring a locking telescoping arm that won't droop over time.&nbsp;As always I recommend printing in PETG or ASA for stronger and longer lasting joints. Especially for the “upper arm” part and any extender pieces.&nbsp;The main parts assemble as shown. Make sure the locking tab is oriented with the “tooth” pointing inward to engage with the gear rack. It can then pivot to engage and disengage the lock at different heights.<figure class="image"><img src="https://media.printables.com/media/prints/563861/rich_content/d5be0f4e-0015-4d36-91b4-fd0427384664/thumbs/cover/800x922/png/cad-colored.webp"></figure>Cutaway view:<figure class="image"><img src="https://media.printables.com/media/prints/563861/rich_content/effed3d7-cf74-4ab0-bbd5-b291966ac566/image.png"></figure><ul><li>For <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13:</a> Use the abdomen parts with the extra ball joint included with the Lucky 13 files.</li><li>For <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13:</a> Replace Mini 13's waist armor part with the adapter included here.</li><li>For <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13:</a> Replace Easy 13's abdomen body part with the adapter included here.</li><li>For <a target="_blank" href="https://www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files" rel="nofollow noopener">Dummy 13</a>: Plug the “stand adapter” part from the “extra bits” section of Dummy's files into the hole in its waist armor.</li></ul>Simply pop the ball on the figure into the socket on the stand and you're ready to go! You can also add one of the extenders between the figure and stand for more range of motion - good for standing poses that need a little extra support.&nbsp;&nbsp;This design is now under a CC BY 4.0 license. This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183787#profileId-202644" rel="nofollow noopener">Lucky 13 Display Base 2.0 </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>

Lucky 13 Display Base 2.0

Lucky 13 and Dummy 13

tbarzak2018

Jeep Duck! I've seen many with the wrong amount of grille pieces and no rear wheel!&nbsp;Add Color! Add Font!

Jeep Duck - Accurate!

Jeep

Printednest

Mechanical Punk Snail, with 3d printed bearings consists of:&nbsp;1. Leg2. Wheel3. Bearings4. 2x Shell5. 2x Eye (no glue needed)6. 3x Stripe (3 versions)&nbsp;Its a perfect toy made for motor skills improvements. You can print single color from 1 color profile, or use 4 color profile to print entire set.&nbsp;

Mechanical Steam Punk Snail

Toys

JamesThePrinter

Your cat must move the sliders to uncover treats. The wells are deep enough to fit most treat sizes or a few pieces of food. Your cat can either eat the treat directly from the well or use their paw to remove it. Two slider designs are currently available - plain or ladybug. Once 3 sliders are placed on the base, simply place the top in position and gently press down to snap it in place.&nbsp;<h5>Print Settings</h5>Although no special settings are required, a higher infill percentage is helpful to add extra weight to the print. This will make it easier for your cat to move the sliders without the entire toy sliding around. If printing the ladybug sliders, use a color change for the last 0.4mm.&nbsp;<a href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Prusament Azure Blue PLA</li><li>Polymaker PolyTerra Lava Red PLA</li><li>Polymaker PolyTerra Charcoal PLA</li></ul>

Cat Treat Toy

Sammy Toys

3DMDesign

With an irresistible charm and a warm, this cartoonish lion cub 3D model captures the heart of the savannah in a playful pose. It promises to bring a touch of regal cuteness to any space.

Lion Fluffy

Miniatures

hollowmaker

Perfect fit for Bambulab A1 Mini: Lego compatible Base Plate!&nbsp;<ul><li>Version: 16x16 knobs - Dimension: 12,8 x 12,8 cm</li><li>I also have larger baseplates available (check my Makerworld-account)</li></ul><h3>Attention! Important: A well calibrated printer is absolutely necessary for this model (This also applies to all my other Lego compatible ones) </h3><h3>If you print on a Bambulab: Before printing, be sure to carry out a flow dynamics calibration for the filament used. The calculated “K value” can be conveniently saved in Bambu Studio.</h3>I added a test baseplate. For those who are not sure about the fit or quality and don't want to take a long time to print. Printing only takes a few minutes. Feel free to test it out:<img src="https://makerworld.bblmw.com/makerworld/draft/421546/2024-01-03_1141371a81a5a.jpeg">&nbsp;&nbsp;Also check out my other Lego compatible designs I have made:<a target="_blank" href="https://makerworld.com/en/u/1369155071" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/421546/2023-12-30_fa85a898e0a39.webp"></a>Follow me to stay updated and never miss out on my latest exciting creations! Thank you :)

Lego-compatible Baseplate 16x16

Legos

fay3dlab

This is my entry to the dragon contest.. I have made the suspended Loong dragon was made to be printed totally supportless.. the whole project was made using Autodesk Maya.. I also provided multiple version of the suspended model.. <ol><li>Suspended dragon without text plate</li><li>Suspended dragon with empty vertical plate on the side for custom wording</li><li>Suspended dragon with empty horizontal plate on the bottom for custom wording</li></ol>I've also used a new technique to add LED strip channel into the frame so no more printing 2 parts frame and joining them together..but there is a catch to it.. you'll need to have a smooth surface for the led strip so the small leds wont get caught on the channel.. my advise is to use cellophane clear tape throughout the LED strip.. you will need 60cm of the LED strip.. i'm currently using 60led per meter LED strip for this project.. dont use the LED strip that has silicone coating on them as it will be hard to insert into the channel and it can easily get stuck due to its stickiness of the silicone..<figure class="media"><div data-oembed-url="https://youtube.com/shorts/pH3r2NFtJ0k"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=pH3r2NFtJ0k"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/pH3r2NFtJ0k" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/475130/2024-01-30_8f58f5784f895.gif"></figure>This time i'm using addressable LED that you can control using bluetooth and custom made your own LED light animations.. which is so much cooler than just color LEDs.. If you're interested in getting the LED strips.. here's my affiliate link to buy it.. i brought the 1meter 60led IP30(non-waterproof) Addressable Smart RGB LED Strip Bluetooth https://s.click.aliexpress.com/e/_EHjKISz&nbsp;When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;If you'd like to support me and my projects.. You can contribute here:<a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee"></a>&nbsp;I hope you guys have fun printing my suspended dragon..

Suspended Dragon with LED strips

Dragons

davglass

AMS Painted version of this model: https://www.printables.com/model/614055-rush-80s-band-sign

Rush Band Sign

Band Name Signs

Valeria Momo

When the lightbox is turned on, Harry Potter's patronus is revealed.I printed the lithograph in <a target="_blank" href="https://eu.store.bambulab.com/it-it/products/pla-matte-filament?variant=42996742881499" rel="nofollow noopener">Ice Blue PLA Matte</a>. On the back it has 2 holes to hang it on the wall, or you can place it flat. No AMS required (only 1 filament change on the front artwork, between layer 3 and 4).&nbsp;These gifs concern <a target="_blank" href="https://makerworld.com/en/models/148464#profileId-161991" rel="nofollow noopener">another creation of mine</a> but the procedure is the same (check my <a target="_blank" href="https://makerworld.com/en/u/2183969071/collections/457055" rel="nofollow noopener">Harry Potter Collection</a>!)<h2>Assembly instructions</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/443916/2024-01-20_1b5d40ad681e5.gif"></figure><h2>Final result (Ice Blue PLA Matte version)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/443916/2024-01-20_4d3105de7fab4.gif"></figure><h3>Lightbox Desk Stand</h3>If you want to hang the lightbox on your desk or shelf, try my <a target="_blank" href="https://makerworld.com/en/models/149905#profileId-163553" rel="nofollow noopener">Lightbox Desk Stand</a>.<figure class="image image_resized" style="width:25.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/443916/2024-01-21_610e23f2afe3a.gif"></figure><h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.

Harry Potter Magic Lightbox

Harry Potter

Qjeezy

Valentines day Gnome sculptures that say LOVE.&nbsp;Print these and enjoy some nice family bonding time painting them for Valentine's day. The kids will love it, mine did. Alternatively, you can also paint them in the slicer and use an AMS to print in multicolor.&nbsp;Scale to any size.&nbsp;The printed objects are free commercial use. Go ahead and sell them at your craft shows and farmers markets! The file itself may not be sold, only physical printed love gnomes. &nbsp;Tip: Print with a light colored matte filament and regular Crayola markers works really well for coloring. Its still messy, but alot safer for the kids. Acrylic Paint markers also work really well, but the use of these should be reserved for adults only. &nbsp;&nbsp;

LOVE Gnomes

Gnomes

DylansLightBoxes

Stitch Light box. Easy to print, one plate for the lid and one plate for the back. Simply add a 1m white led strip and you have a great light box! The hole on the back is designed to fit a 20mm wire grommet (easily found on amazon).

Stitch Light Box

Light Box

cruse2382

family of bears 4 bears 2 adults 2 children

family of bears 4 bears with tabs

Wall Art

TrendtB

Make your kitchen herb gardening easy - ideal for busy cooks and gardening enthusiasts, this planter ensures your herbs stay hydrated and fresh, even on your busiest days. If you're an avid cook, or know someone that is - start printing now and add a touch of green to those kitchen counters!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_27004b97fd569.gif"><figcaption>Make various patterns and arrangements with multiple planters</figcaption></figure>&nbsp;Inspired by my wife's passion for cooking with fresh herbs, this planter is designed to blend seamlessly into any kitchen aesthetic. Perfect for those who appreciate both functionality and style in their cooking space.&nbsp;<h3>KEY FEATURES</h3><ul><li>Easy Self-Watering: Built-in reservoir keeps herbs hydrated.</li><li>Artistic Design: Intricate floral pattern forming a love heart, adding a decorative touch.</li><li>Dual-Purpose Base: Use a standalone base as a stylish container for herb gardening tools.</li><li>Batch Printing Profiles: Optimized for quick and efficient batch printing.</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_0b77f080a19a4.gif"><figcaption>The floral design allows you to play with different patterns depending on how the planter is placed.</figcaption></figure>&nbsp;&nbsp;<h3>HOW IT WORKS</h3>The planter is designed to slowly absorb water from the reservoir (base), which you occasionally top up with water. There is a seam that acts as a guide for how far to fill. Don't fill over this line or water will be pushed out through the top!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_f7d43224f4262.gif"><figcaption>The base acts as a reservoir of water - fill to just below the seam then place your plant on top</figcaption></figure>&nbsp;When you're planting your herb in the top half, it is recommended to use a wicking material at the very bottom. This helps to slowly absorb water into the soil and roots. You can place a couple of cotton balls / cotton wool in the bottom of the pot to do this. Then fill with soil, and your herb of choice.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_d13556ba7b91.gif"><figcaption>Place cotton wool into the bottom of the pot to act as a wicking material.</figcaption></figure>&nbsp;&nbsp;<h3>PRINT SETTINGS</h3>Use the designer profiles to ensure the base is water-tight, or you'll risk water seeping through the print! If you're looking to adjust the profile, or build your own - these are the key settings to maintain ensure there are no leaks:<ul><li>Infill overlap: 50%</li><li>Walls: 3</li><li>Top shell layers: 5</li></ul>Additional profiles have been provided to batch print, or print using a single plate and color.

Self-watering Herb Planter for the kitchen

Planters and Vases

Trevstein96

I remixed JohnPepsis A1 mount and Ondrovics Mini mount. its working great for me and gives me a better camera angle.Enjoy&nbsp;<a target="_blank" href="https://makerworld.com/en/models/102933#profileId-109617" rel="nofollow noopener">https://makerworld.com/en/models/102933#profileId-109617</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/118949#profileId-127961" rel="nofollow noopener">https://makerworld.com/en/models/118949#profileId-127961</a>

Remix A1 Wyze V3 mount

Printer Accessories

rxunique

No other existing model has the right sizes of my socket set, so made another oneBased on Zack's gridfinity

Gridfinity 1/2 Metric Deep Socket 10-24

Tools

Ken Mills

Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well).&nbsp;The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in.&nbsp;Important:<ul><li>Be sure to allow the print to fully cool before removing from the build plate to avoid warping it while still warm.</li><li>If you are having trouble printing thin lines or the slicer preview, make sure the Arachne wall generator is enabled.</li></ul>Before printing the included frame, check out my new lightbox option: <a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener">https://makerworld.com/en/models/145904</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457770/2024-01-27_34196d0c3075.jpg"></a>&nbsp;Check out my other patent art here: <a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener">https://makerworld.com/en/u/3703368285/collections/18978</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457770/2024-01-27_1295b19d277ea.webp"></a>

SLR Camera Patent Art - Top

Photography

Booyashaka

Modular Stackable Shelving System------------------------------------------------------------------------------Fully customizable shelving. Snug fit design.-----------------------2 style of posts at 25mm height increment from 50 to 200 (clearance)‘relatively stronk’ - the dumbbell pictured is 10lbs (tested with bambu pla basic), you can also add mid span posts for extra strength-----------------------Cap for top posts. Also included posts with reduced peg height for a flush top-----------------------Feet - 10 &amp; 20mm height. And a 5mm to use as a floating mid span post anchor-----------------------2 style of base (rib &amp; no rib) - Width at 60 increment from 60 to 240 - Length @ 120 &amp; 240The rib style base reduce height clearance by 5mmFit bambu filament spool cardboard box&nbsp;(You need to do some mod to print the full size 240x240 base due to the interference with the front left purge area, bambu guide <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">here</a>)(2 smaller bases in the picture are older versions)&nbsp;Bambu wouldn&#39;t accept the large 240x240 base in the 3mf, so I have uploaded the model.&nbsp;************************************************&nbsp;TOLERANCES are 0.22mm &amp; 0.15mm for the pegs (reg &amp; top)Works fine with 0.4mm nozzle, bambu pla basic &amp; default line width for me.&nbsp;************************************************&nbsp;2024-01-13 REVISION 2 - plate 11 to 13-----------------------added 3 pegs posts (reg &amp; slim) - all heightadded 4 pegs posts (slim) - all height&nbsp;************************************************&nbsp;2024-01-20 REVISION 3 - plate 14 &amp; 15-----------------------Added 5 vertical brace for when you need max sway protection - for height 100 to 200.Stackable and as always - no support needed - pegs should slide right in just the way she likes it.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-20_67390e96d50e1.jpg">&nbsp;************************************************&nbsp;2024-01-28 REVISION 4 - plate 16-----------------------Added offset posts - you can use the entire base plates surface with these.Slim and regular - all heights.&nbsp;01-28 pm - Forgot 2 add top holder/cap - plate 9&nbsp;2024-01-30 - there was a slight error on the top holder/cap - fixed&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-28_61f49fa041319.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-01-28_1c5a707feadd.jpg">&nbsp;************************************************&nbsp;2024-05-03 REVISION 5 - plate 17 &amp; 18-----------------------As requested by some users:Added slim base 240x180 ribbed - save ~45% in filament - suitable for boxes or large itemAdded vertical brace height 75 &amp; 50 &nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-05-03_d8c5cc5b08761.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000120634/design/2024-05-03_3189fcec4eeb.jpg">************************************************&nbsp;

Modular Stackable Open Shelving System

Desk organizers

Ov4l8alls

My contribution to the Gridfinity system from Zack FreemanIf you are unfamiliar, please see the original video on the Gridfinity project: <figure class="media"></figure><a href="https://thangs.com/designer/ZackFreedman" rel="nofollow">https://thangs.com/designer/ZackFreedman</a>The design allows tray to be stored on a grid in a drawer, whilst still adhering to Zach's orginal concept of keeping the tool visible and accessible.The tray work equally as well when used on the desktop as part of your project space. I also leaned heavily on onshape files created by CRAM42 to generate the blank tray used to create this model: <a href="https://cad.onshape.com/documents/95d6b2cad95d26b6c62377b4/w/5b7f1299075465d93bbb3ff9/e/47627200e70aa6e718962e14" rel="nofollow">https://cad.onshape.com/documents/95d6b2cad95d26b6c62377b4/w/5b7f1299075465d93bbb3ff9/e/47627200e70aa6e718962e14</a>&nbsp;

Gridfinity Scapel Tray

Gridfinity

FilliFuu

Flexi steampunk dragon featuring my new experimental articulated joints as seen on my latest model releases.&nbsp;A highly detailed model where the joints can be clicked into position, with added articulated arms and wings. The ball sockets on the links throughout the dragons body can be clicked to maintain stable positions if desired, useful for posing of the model and to give the standard articulated design commonly seem an added twist.&nbsp;Due to the force required to click the joints it recommended to avoid using brittle filaments such as silk if you intend to use the joining function. I have included an stl file containing just the joints to quick print the links if you are unsure if your filament is strong enough for the design.&nbsp;Model is completely print in place supports aren't required on the body or wings however it's more suitable to uses supports on the wings only, I have successfully printed without supports for the wings with just an increased size brim but it's safer to print with to avoid any failures towards the end of the print.&nbsp;Wall size is fine at the standard 0.42, i ran the walls at 90 with gyroid infill with 100% success, tested with many filaments and sizes. (silk is too weak when assembling the joints typically) and brim on.#&nbsp;Can be scaled in size up or down. If scaling down the smallest recommended size would be 75 percent maximum to ensure the joints still work. If scaling up the limit should be your machines full bed capacity, and of course a larger print will mean a stronger model.&nbsp;Any questions just ask and share if you enjoy the print.

Steampunk Flexi Dragon

Flexi Prints

Embrace Making

<figure class="media"><div data-oembed-url="https://youtu.be/KOtIbI5YBWI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KOtIbI5YBWI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is the Bambu Lamps LED Spool. Made from a Bambu Labs reusable spool, this lamp can be illuminated with a smart RGB LED strip and connected to your home automation system to be remotely controlled. It makes a very nice looking desk lamp or conversation piece within your office or shop. &nbsp;Please note that the Bambu Labs spools come in both translucent frosted plastic (preferred) or solid white. From what I can tell there is no guarantee that you will receive one or the other when ordering specific Bambu Labs materials. Either one will work but the frosted one allows light to also shine through the spool which looks nice. &nbsp;You will need the following items to complete this assembly. As an Amazon associate I may earn a small commission (at no extra cost to you): &nbsp;3D printed files: ► YOU ARE HERE&nbsp;LED Strip - the exact one I used in the video is no longer available but this is almost exact substitute: ► <a target="_blank" href="https://amzn.to/48HHbZ9" rel="nofollow noopener">https://amzn.to/48HHbZ9</a>&nbsp;Thread forming screws: ► <a target="_blank" href="https://amzn.to/3RRCKEr" rel="nofollow noopener">https://amzn.to/3RRCKEr</a>&nbsp;3M Double sided tape: ► <a target="_blank" href="https://amzn.to/3TVDGdH" rel="nofollow noopener">https://amzn.to/3TVDGdH</a>&nbsp;Bambu Labs Reusable Spool: ► <a target="_blank" href="https://us.store.bambulab.com/products/bambu-reusable-spool" rel="nofollow noopener">https://us.store.bambulab.com/products/bambu-reusable-spool</a>&nbsp;I would suggest printing all of the covers (front and rear), plus the LED filament diffuser in white material so light can easily pass through. The stand, screw and the color accent parts can be made in any color of your liking. I chose white and grey as they match the Bambu Labs color scheme nicely. &nbsp;PLA materials works perfectly fine and the typical 3 walls, 3 floors and ceiling layers is fine at 0.2mm layer height. Only the stand will need support material in a few locations. The LED diffuser file can be printed in normal mode - or optionally should be able to print in spiral vase mode. It is only one wall layer anyways so the result is almost identical but spiral vase mode will result in no Z seam.&nbsp; **************************************************************************** &nbsp;If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here: ► <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y</a>&nbsp;By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can! Follow me on Instagram! &nbsp;► <a target="_blank" href="https://www.instagram.com/embracemaking/" rel="nofollow noopener">https://www.instagram.com/embracemaking/</a>&nbsp;